MICRODUCT CONNECTORS
These HDPE straight microduct connectors are presented for joining compatible tubes in air-blown fiber and telecom routes.
The source repeats the FPU connector family data: transparent position checking, pre-installed tamper-evident clips, push-fit technology and a maximum working pressure statement. Confirm the exact tube OD/ID, blowing conditions and model code before purchase.
TECHNICAL DETAILS
| 아이템 | Published information |
|---|---|
| Product type | HDPE-compatible straight microduct connector |
| Tube materials | HDPE, PE, nylon and polyurethane listed |
| Size range shown | FPU codes cover tube outside diameters from 3 to 20 mm in the published table |
| Air-blowing boundary | Recommended blowing temperature â15 to 35 °C stated on the source page |
| Protection / pressure | IP68 stated; 0â1.6 MPa operating pressure and 2.5 MPa proof pressure stated |
PRODUCT DETAIL IMAGES
The original product detail images are retained below for visual reference. Confirm the quoted model and dimensions before ordering.
SELECTION GUIDE
Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.
OEM & PROJECT CAPABILITY
Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.
B2B SOURCING SUPPORT
The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:
Company-level support and commercial terms should be reconfirmed for the selected product and order.
자주 묻는 질문
It is a push-fit joint for connecting compatible microduct sections, including HDPE tubes used in fiber routes.
The product is presented for air-blown fiber routes and publishes a recommended blowing temperature of â15 to 35 °C. Confirm the project test plan.
Send the measured OD/ID and tube material for both sides; the source table lists multiple FPU codes from 3 to 20 mm OD.
The page states 0â1.6 MPa operating pressure and 2.5 MPa proof pressure. Request the applicable test method and safety margin.
IP68 is stated on the source page. Confirm the current model evidence and route exposure before treating it as a project requirement.
Request the model drawing, pressure or leak-test data, standard evidence, packing and any air-blowing installation guidance.
더 알아보기
마이크로덕트 Y형 접속 박스는 광섬유 네트워크, 특히 블로운 파이버(포항공법) 설치에서 필수적인 구성 요소입니다. 이들의 주된 기능은 광섬유 접속부에 보호와 정리를 제공하여 네트워크의 무결성과 신뢰성을 보장하는 것입니다.
절지강 오울루 오토매틱 이큅먼트 주식회사(Zhejiang Oulu Automatic Equipment Co., Ltd.) 간략 설명: 설명: 단순한 모듈식 설계로 케이블이 이미 터미네이션된 경우를 포함하여 모든 상황에서 쉽게 설치할 수 있습니다. 유리섬유 강화 폴리아미드로 제작되어 최대 0.5까지의 케이블이 포함된 마이크로 덕트를 기밀 상태로 씰링합니다.
도움이 필요하신가요?
