Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Micro-duct connector providing gas tight seal connection around the cable inside. When opened, cable can be blown through this connectorand sealed afterwards by rotating ring. They operate safelyat blowing pressure of 10 Bar and protect the inner cavity of your micro-ducts against ingress of any particles.Should be installed always at the entry transition points to the buildings, ODFs etc. wherewater or gas presence is the matter of danger. Two locking clips can be ordered separately to prevent micro-ducts self release.
FZA14/12 7-10 straight microduct gas block connector
This FZA14/12 7-10 straight microduct gas block connector is presented for providing a gas-tight seal around a cable inside the microduct.
The supplier states that cable can be blown through the open connector and sealed afterwards by rotating the ring. A 10 bar blowing-pressure statement and use at building or ODF entry transitions are published; confirm the exact fit and current test evidence.
TECHNICAL DETAILS
Published product facts
아이템
Published information
Product type
Straight microduct gas block connector
Model stated
FZA14/12 7-10
Installation sequence
Cable may be blown through the open connector and sealed afterwards by rotating the ring
Published pressure statement
Operates safely at 10 bar blowing pressure
Application / option
Building and ODF entry transitions; two optional locking clips may be ordered separately
PRODUCT DETAIL IMAGES
Product Detail
The original product detail images are retained for visual reference. Confirm the quoted model, dimensions and test requirements before ordering.
SELECTION GUIDE
Checking an FZA gas block at an entry transition
Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.
Confirm duct dimensionsProvide the microduct OD/ID and verify the FZA14/12 fit.
Confirm cable sizeSend the cable outside diameter and check the published 7-10 range.
Describe the transitionState building entry, ODF, cabinet or other location where gas or water presence matters.
Set the test and clip requirementConfirm blowing pressure, sealing test, locking clips, quantity and documents.
OEM & PROJECT CAPABILITY
Company capability for telecom supply
Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.
The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:
Provide the microduct OD/ID and verify the FZA14/12 fit.
Target quantity, model or size mix, sample needs and packing preference.
Drawings, route conditions, pressure or sealing tests and compliance documents.
Current MOQ, price, freight, sample timing and production timing to be confirmed in the quotation.
Company-level support and commercial terms should be reconfirmed for the selected product and order.
Share dimensions, route conditions and quantities for a product-specific quotation.Send product requirements
PROJECT SUPPORT
Plan the right microduct solution
검토 microduct route solutions 그리고 서비스 pages for project context, then confirm exact fit, documents and commercial terms in the quotation.
저장소 오울루 오토매틱 이큅먼트 유한회사 (Zhejiang Oulu Automatic Equipment Co., Ltd.) 간략한 설명: 설명: 심플렉스 플러그(Simplex plugs)는 단일 케이블이 들어 있는 HDPE 덕트를 효과적으로 밀봉합니다. 이 플러그는 분리 및 재사용이 가능합니다. 도관 및 서브덕트 내 케이블 주변의 적절한 밀봉은 비용이 많이 드는...
절지강 오울루 오토매틱 이큅먼트 주식회사(Zhejiang Oulu Automatic Equipment Co., Ltd.) 간략 설명: 설명: 단순한 모듈식 설계로 케이블이 이미 터미네이션된 경우를 포함하여 모든 상황에서 쉽게 설치할 수 있습니다. 유리섬유 강화 폴리아미드로 제작되어 최대 0.5까지의 케이블이 포함된 마이크로 덕트를 기밀 상태로 씰링합니다.
절지강 오울루 자동화 장비 유한회사 (Zhejiang Oulu Automatic Equipment Co., Ltd.) 간략 설명: 설명: 공기 유출, 물 또는 기타 물질의 유입을 방지하기 위해 개방형 튜브를 마감하는 데 사용되는 표준 투명 엔드 캡입니다. 엔드 캡은 안전 클립이 사전 조립되어 있습니다. 주요 특징: ①...
