FZA14/12 7-10 ravni mikro-kanalni gasni blok konektor, galerijska slika 1

Mikrodukt konektori

FZA14/12 7-10 ravni mikrokanalni gasni blok konektor

Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Micro-duct connector providing gas tight seal connection around the cable inside. When opened, cable can be blown through this connectorand sealed afterwards by rotating ring. They operate safelyat blowing pressure of 10 Bar and protect the inner cavity of your micro-ducts against ingress of any particles.Should be installed always at the entry transition points to the buildings, ODFs etc. wherewater or gas presence is the matter of danger. Two locking clips can be ordered separately to prevent micro-ducts self release.                        

KategorijaMikrodukt konektori
Pošalji upit Detalji o proizvodu

MICRODUCT CONNECTORS

FZA14/12 7-10 straight microduct gas block connector

This FZA14/12 7-10 straight microduct gas block connector is presented for providing a gas-tight seal around a cable inside the microduct.

The supplier states that cable can be blown through the open connector and sealed afterwards by rotating the ring. A 10 bar blowing-pressure statement and use at building or ODF entry transitions are published; confirm the exact fit and current test evidence.

TECHNICAL DETAILS

Published product facts

Stavka Published information
Product type Straight microduct gas block connector
Model stated FZA14/12 7-10
Installation sequence Cable may be blown through the open connector and sealed afterwards by rotating the ring
Published pressure statement Operates safely at 10 bar blowing pressure
Application / option Building and ODF entry transitions; two optional locking clips may be ordered separately

PRODUCT DETAIL IMAGES

Product Detail

The original product detail images are retained for visual reference. Confirm the quoted model, dimensions and test requirements before ordering.

FZA14/12 7-10 Straight Microduct Gas Block Connector detail 1
FZA14/12 7-10 Straight Microduct Gas Block Connector detail 2
FZA14/12 7-10 Straight Microduct Gas Block Connector detail 3
FZA14/12 7-10 Straight Microduct Gas Block Connector detail 4
FZA14/12 7-10 Straight Microduct Gas Block Connector detail 5
FZA14/12 7-10 Straight Microduct Gas Block Connector detail 6
FZA14/12 7-10 Straight Microduct Gas Block Connector detail 7
FZA14/12 7-10 Straight Microduct Gas Block Connector detail 8
FZA14/12 7-10 Straight Microduct Gas Block Connector detail 9

SELECTION GUIDE

Checking an FZA gas block at an entry transition

Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.

  1. Confirm duct dimensionsProvide the microduct OD/ID and verify the FZA14/12 fit.
  2. Confirm cable sizeSend the cable outside diameter and check the published 7-10 range.
  3. Describe the transitionState building entry, ODF, cabinet or other location where gas or water presence matters.
  4. Set the test and clip requirementConfirm blowing pressure, sealing test, locking clips, quantity and documents.

OEM & PROJECT CAPABILITY

Company capability for telecom supply

Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.

Explore company capabilities

Quality inspection for Oulu microduct connector supply
Warehouse packing for Oulu microduct connector orders

B2B SOURCING SUPPORT

B2B purchasing support

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:

  • Provide the microduct OD/ID and verify the FZA14/12 fit.
  • Target quantity, model or size mix, sample needs and packing preference.
  • Drawings, route conditions, pressure or sealing tests and compliance documents.
  • Current MOQ, price, freight, sample timing and production timing to be confirmed in the quotation.

Company-level support and commercial terms should be reconfirmed for the selected product and order.

Share dimensions, route conditions and quantities for a product-specific quotation.Send product requirements

PROJECT SUPPORT

Plan the right microduct solution

Review the microduct route solutions i Usluga pages for project context, then confirm exact fit, documents and commercial terms in the quotation.

Discuss your project

Često postavljana pitanja

Često postavljana pitanja

What does the FZA14/12 gas block connector do?

It seals around the cable inside a microduct at an entry point where gas, water or particles could migrate.

Can cable be blown through the connector?

The supplier states that cable can be blown through while the connector is open and sealed afterwards by rotating the ring.

What pressure is published?

The source states safe operation at a blowing pressure of 10 bar. Confirm the test method and route requirement.

Where should this gas block be installed?

The supplier identifies building and ODF entry transition points where gas or water presence creates a risk.

Are locking clips included?

The source says two locking clips can be ordered separately to help prevent microduct release.

What should I send for an FZA quotation?

Provide duct OD/ID, cable diameter, transition location, blowing and sealing tests, clip requirement, quantity and documents.

Istražite više

Povezani proizvodi

  • Microduct zaštitna školjka, galerijska slika 1

    Mikrodukt zaštitna ljuska

    Zhejiang Oulu Automatic Equipment Co., Ltd. Kratki opis: Dostupne odvojeno ili prethodno sastavljene na spojku po vašem izboru, Euroland Company nudi širok asortiman prilagođenih polipropilenskih poklopaca sa klik-zaključavanjem. Poklopci za direktno ukopavanje dostupni su za ravne reduktore i krajne zaustavljače...

    Prikaži detalje Upit
  • Galerijska slika 1 podijeljivog mikroduktnog brtvenog prstena

    Podijeljivi mikrokanalni brtveni prsten

    Predstavljamo podijeljivi mikro-vodni brtveni sistem kompanije Zhejiang Oulu Automatic Equipment Co., Ltd., vrhunsko rješenje osmišljeno za efikasno upravljanje optičkim vlaknima. Ova inovativna brtvena tehnologija pruža vrhunsku zaštitu od prašine, vlage i drugih vanjskih utjecaja, osiguravajući optimalne performanse...

    Prikaži detalje Upit
  • Slika 1 iz galerije praznih čepova za kanale

    Prazne čepove za kanale

    Prazni čepovi efikasno zaptivaju prazne krajeve HDPE kanala. Ovi čepovi su uklonjivi i višekratno upotrebljivi. Pravilno zaptivanje vaših kanala i podkanala važno je za sprečavanje skupih poplava u zgradama i taloženja unutar njih.

    Prikaži detalje Upit

Trebate pomoć?

Obezbijedite podršku za vaše zahtjeve za proizvodom.

Upit o projektuPodijelite zahtjeve vaše aplikacije i željenu konfiguraciju. Tehnička podrškaPregledajte upute za instalaciju i opcije servisne podrške. Kontaktirajte prodajuRazgovarajte s našim prodajnim timom o proizvodima i rokovima isporuke.