Conetor retsp de bloqueio de gás para microduto FZA14/12 7-10
Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Micro-duct connector providing gas tight seal connection around the cable inside. When opened, cable can be blown through this connectorand sealed afterwards by rotating ring. They operate safelyat blowing pressure of 10 Bar and protect the inner cavity of your micro-ducts against ingress of any particles.Should be installed always at the entry transition points to the buildings, ODFs etc. wherewater or gas presence is the matter of danger. Two locking clips can be ordered separately to prevent micro-ducts self release.
FZA14/12 7-10 straight microduct gas block connector
This FZA14/12 7-10 straight microduct gas block connector is presented for providing a gas-tight seal around a cable inside the microduct.
The supplier states that cable can be blown through the open connector and sealed afterwards by rotating the ring. A 10 bar blowing-pressure statement and use at building or ODF entry transitions are published; confirm the exact fit and current test evidence.
TECHNICAL DETAILS
Published product facts
Artigo
Published information
Product type
Straight microduct gas block connector
Model stated
FZA14/12 7-10
Installation sequence
Cable may be blown through the open connector and sealed afterwards by rotating the ring
Published pressure statement
Operates safely at 10 bar blowing pressure
Application / option
Building and ODF entry transitions; two optional locking clips may be ordered separately
PRODUCT DETAIL IMAGES
Product Detail
The original product detail images are retained for visual reference. Confirm the quoted model, dimensions and test requirements before ordering.
SELECTION GUIDE
Checking an FZA gas block at an entry transition
Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.
Confirm duct dimensionsProvide the microduct OD/ID and verify the FZA14/12 fit.
Confirm cable sizeSend the cable outside diameter and check the published 7-10 range.
Describe the transitionState building entry, ODF, cabinet or other location where gas or water presence matters.
Set the test and clip requirementConfirm blowing pressure, sealing test, locking clips, quantity and documents.
OEM & PROJECT CAPABILITY
Company capability for telecom supply
Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.
The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:
Provide the microduct OD/ID and verify the FZA14/12 fit.
Target quantity, model or size mix, sample needs and packing preference.
Drawings, route conditions, pressure or sealing tests and compliance documents.
Current MOQ, price, freight, sample timing and production timing to be confirmed in the quotation.
Company-level support and commercial terms should be reconfirmed for the selected product and order.
Share dimensions, route conditions and quantities for a product-specific quotation.Send product requirements
PROJECT SUPPORT
Plan the right microduct solution
Review the microduct route solutions e Serviço pages for project context, then confirm exact fit, documents and commercial terms in the quotation.
Zhejiang Oulu Automatic Equipment Co., Ltd. Breve descrição: DESCRIÇÃO: Os conectores redutores permitem a interligação entre dois microcondutas com diâmetro exterior diferente. Tipicamente, este é o caso do ponto de transição da microconduta DB para DI que entra na casa. Se não tiver...
As caixas de junção para microdutos do Tipo T são componentes essenciais em redes de fibra ótica, em particular em instalações de fibra soprada. A sua função principal é proporcionar proteção e organização às emendas de fibra, garantindo a integridade e a fiabilidade da rede.
Zhejiang Oulu Automatic Equipment Co., Ltd. Descrição curta: A tampa de extremidade para microduto em liga de zinco proporciona um vedante durável e seguro para ligações de microdutos. A sua construção robusta garante proteção fiável e eficiência para a infraestrutura da sua rede.
