マイクロダクトコネクタ
HDPEストレートマイクロダクトコネクタ エアブロー製品用光コネクタ
浙江欧鲁自动化设备有限公司 简短说明： 描述：微管直通接头，性能优良。透明管体便于确认微管在内部的位置。预装有防篡改安全夹。经过测试并符合 EN 50411-2-8 标准。 主要特点：① 含安全夹 ② 推入式技术 ③ 工作压力：最大 25 巴
カテゴリマイクロダクトコネクタ
MICRODUCT CONNECTORS
HDPE straight microduct connectors for air-blown fiber installation
These HDPE straight microduct connectors are presented for joining compatible tubes in air-blown fiber and telecom routes.
The source repeats the FPU connector family data: transparent position checking, pre-installed tamper-evident clips, push-fit technology and a maximum working pressure statement. Confirm the exact tube OD/ID, blowing conditions and model code before purchase.
TECHNICAL DETAILS
Published product facts
| アイテム | Published information |
|---|---|
| Product type | HDPE-compatible straight microduct connector |
| Tube materials | HDPE, PE, nylon and polyurethane listed |
| Size range shown | FPU codes cover tube outside diameters from 3 to 20 mm in the published table |
| Air-blowing boundary | Recommended blowing temperature â15 to 35 °C stated on the source page |
| Protection / pressure | IP68 stated; 0â1.6 MPa operating pressure and 2.5 MPa proof pressure stated |
PRODUCT DETAIL IMAGES
Product Detail
The original product detail images are retained below for visual reference. Confirm the quoted model and dimensions before ordering.
SELECTION GUIDE
Specifying an HDPE connector for air-blown fiber
Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.
-
Measure the ductProvide actual tube OD/ID and material rather than relying only on a nominal size.
-
Check blowing conditionsState cable-blowing method, temperature range and required air-tightness test.
-
Select the codeRequest the matching FPU article code, tapered hole and overall dimensions.
-
Close the procurement pointsConfirm sample, quantity, packing, documents and current delivery terms.
OEM & PROJECT CAPABILITY
Company capability for telecom supply
Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.
B2B SOURCING SUPPORT
B2B purchasing support
The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:
- Provide actual tube OD/ID and material rather than relying only on a nominal size.
- Target quantity, model or size mix, sample needs and packing preference.
- Drawings, route conditions, pressure or sealing tests and compliance documents.
- Current MOQ, price, freight, sample timing and production timing to be confirmed in the quotation.
Company-level support and commercial terms should be reconfirmed for the selected product and order.
Share dimensions, route conditions and quantities for a product-specific quotation.Send product requirements
よくある質問
よくある質問
What is an HDPE straight microduct connector?
It is a push-fit joint for connecting compatible microduct sections, including HDPE tubes used in fiber routes.
Can it be used for air-blown fiber?
The product is presented for air-blown fiber routes and publishes a recommended blowing temperature of â15 to 35 °C. Confirm the project test plan.
How do I choose the correct FPU size?
Send the measured OD/ID and tube material for both sides; the source table lists multiple FPU codes from 3 to 20 mm OD.
What pressure data is published?
The page states 0â1.6 MPa operating pressure and 2.5 MPa proof pressure. Request the applicable test method and safety margin.
Does the connector have environmental protection?
IP68 is stated on the source page. Confirm the current model evidence and route exposure before treating it as a project requirement.
What documents should accompany an order?
Request the model drawing, pressure or leak-test data, standard evidence, packing and any air-blowing installation guidance.
もっと見る
関連商品
-
マイクロダクト保護シェル
浙江欧路自动化设备有限公司 概要：ユーロランド（Euroland Company）社は、個別でも、ご希望の継手にあらかじめ組み立てた状態でも、幅広い種類のカスタマイズ可能なポリプロピレン製スナップロックカバーを供給しています。直埋め用カバーは、ストレートレデューサーおよびエンドストップ用にご用意しています...
-
エンドプラグ シール プラスチックキャップ
浙江欧鲁自动化设备有限公司 概要： 説明：軟質PVCキャップは、ダクト端部に防塵保護を提供します。耐候性および紫外線に対して優れた耐性を持っています。輸送、保管、または据付期間中の使用に最適です...
-
マイクロダクトレデューサーカプラー
浙江欧鲁自动化设备有限公司 简短说明： 描述：异径连接器允许外径不同的两个微管之间进行互连。通常这是指从DB（直埋）到进入房屋的DI（内衬/穿线）微管的过渡点。如果您还没有...