HDPE Straight Microduct Connectors Optical Connector for Air Blow Products
Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: DESCRIPTION: Microduct Straight connectors, which guarantee a good performance. Transparent body allows verification of the micro-ducts position inside. Safety clips,tamper evident, are pre-installed. Tested & comply with EN 50411-2-8. MAIN FEATURES: ① Safety clips included ② Push-ft technology ③ Working Pressure: max. 25 bars
HDPE straight microduct connectors for air-blown fiber installation
These HDPE straight microduct connectors are presented for joining compatible tubes in air-blown fiber and telecom routes.
The source repeats the FPU connector family data: transparent position checking, pre-installed tamper-evident clips, push-fit technology and a maximum working pressure statement. Confirm the exact tube OD/ID, blowing conditions and model code before purchase.
TECHNICAL DETAILS
Published product facts
Components
1
Collet
POM
2
Locking Clip
POM
3
Cartridge
POM
4
Lock Claw
SUS301/304
5
Support Ring
POM
6
Seal Ring
TEP
7
Body
PC2807
Fit Tube
Pipe material
HDPE、PE、Nylon、Polyurethane
Outer diameter of pipe
Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ16,Φ18,Φ20
Technical Parameter
Working with fluids
Air
Tightness
0.15~0.8MPa No Leak
Pull test
400N
Proof pressure
2.5MPa
Operating pressure range
0~1.6MPa
Ambient temperature and fluid temperature
-40~60℃
Installation Temperature
-10℃/+50℃
Recommended Blowing Temperature
-15℃/+35℃
Degree of protection
IP68
UV-resistant grade
F1
Insertion force
50N max(5kg)
Lifespan:
25 years
StAndards:
EN 50411-2-8
TABLE OF ARTICLES
ANMASPC Code
Pipe OD/ID
Pipe OD/ID
Tapered hole
FPU3/2.1
3/2.1
3/2.1
2.1
FPU4/2.5
4/2.5
4/2.5
2.5
FPU4/2.8
4/2.8
4/2.8
2.8
FPU5/2.1
5/2.1
5/2.1
2.1
FPU5/3.5
5/3.5
5/3.5
3.5
FPU6/4
6/4
6/4
4
FPU7/3.5
7/3.5
7/3.5
3.5
FPU7/4
7/4
7/4
4
FPU7/5.5
7/5.5
7/5.5
5.5
FPU8/3.5
8/3.5
8/3.5
3.5
FPU8/6
8/6
8/6
6
FPU10/6
10/6
10/6
6
FPU10/8
10/8
10/8
8
FPU12/8
12/8
12/8
8
FPU12/10
12/10
12/10
10
FPU14/10
14/10
14/10
10
FPU14/12
14/12
14/12
12
FPU16/12
16/12
16/12
12
FPU16/13
16/13
16/13
13
FPU16/14
16/14
16/14
14
FPU18/15
18/15
18/15
15
FPU20/14
20/14
20/14
14
FPU20/15
20/15
20/15
15
FPU20/16
20/16
20/16
16
Overall Dimensions
ANMASPC Code
A
B
C
D
E
F
FPU3
28.8
5.5
8
8.3
3.2
2.1
FPU5
36.5
8
10.7
11.6
5.2
2-3.5
FPU7
38.8
10.9
13.4
14.7
7.3
3.5-4-5.5
FPU9
38.8
11
13.4
14.7
6.3
3.5-6
FPU10
43
12.9
15.6
16.5
10.3
6-8
FPU12
47
14.7
17.5
19.1
12.4
8-10
FPU14
49.8
16.9
20
21.1
14.5
10-12
FPU16
55.2
19
23
23.7
16.5
12-14
FPU18
69
22.5
27.5
29
18.5
14
FPU20
83.4
25.5
32.1
33.5
20.6
14-16-18
PRODUCT DETAIL IMAGES
Product Detail
The original product detail images are retained below for visual reference. Confirm the quoted model and dimensions before ordering.
SELECTION GUIDE
Specifying an HDPE connector for air-blown fiber
Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.
Measure the ductProvide actual tube OD/ID and material rather than relying only on a nominal size.
Check blowing conditionsState cable-blowing method, temperature range and required air-tightness test.
Select the codeRequest the matching FPU article code, tapered hole and overall dimensions.
Close the procurement pointsConfirm sample, quantity, packing, documents and current delivery terms.
OEM & PROJECT CAPABILITY
Company capability for telecom supply
Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.
The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:
Provide actual tube OD/ID and material rather than relying only on a nominal size.
Target quantity, model or size mix, sample needs and packing preference.
Drawings, route conditions, pressure or sealing tests and compliance documents.
Current MOQ, price, freight, sample timing and production timing to be confirmed in the quotation.
Company-level support and commercial terms should be reconfirmed for the selected product and order.
Share dimensions, route conditions and quantities for a product-specific quotation.Send product requirements
PROJECT SUPPORT
Plan the right microduct solution
Review the microduct route solutions and Service pages for project context, then confirm exact fit, documents and commercial terms in the quotation.
Zhejiang Oulu Automatic Equipment Co., Ltd. presents its high-quality Microduct Type T splice boxes, essential for optimal performance in fiber optic networks, especially in blown fiber installations. Designed to ensure the protection and organization of fiber splices, these splice boxes...
Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Standard transparent end caps, which are used to terminate open ended Tubes to avoid air leakage, water or other material ingress. End caps are preassembled with security clips. ...
Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: DESCRIPTION: Soft PVC caps provides anti-dust protection of your duct ends. They have an excellent resistance to weather conditions And UV radiation. Ideally used for transport, storage or installation period of your...
