HDPE 스트레이트 커플링

기술적 세부 사항

게재된 제품 정보

			구성 요소
			1	콜렛	POM
			2	잠금 클립	POM
			3	카트리지	아연 합금
			4	잠금 클로	SUS301/304
			5	서포트 링	POM
			6	인장 반지	TEP
			7	본체	PC2807
피트 튜브
파이프 재질				HDPE、PE、Nylon、Polyurethane
파이프 외경				Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ14,Φ16
Technical Parameter
유체 다루기				공기
조임				0.15~0.8MPa 누설 없음
인장 시험				400N
내압시험 압력				2.5MPa
작동 압력 범위				0~1.6MPa
주위 온도와 유체 온도				-40~60℃
설치 온도				-10℃/+50℃
권장 불어내기 온도				-15℃/+35℃
보호 등급				IP68
자외선 차단 등급				F1
삽입력				50N 최대(5kg)
수명				25년
표준				EN 50411-2-8
사양 및 치수
ANMASPC 코드	파이프 외경/내경		파이프 외경/내경		테이퍼 구멍
FPU3/2.1	3/2.1		3/2.1		2.1
FPU4/2.5	4/2.5		4/2.5		2.5
FPU4/2.8	4/2.8		4/2.8		2.8
FPU5/2.1	5/2.1		5/2.1		2.1
FPU5/3.5	5/3.5		5/3.5		3.5
FPU6/4	6/4		6/4		4
FPU7/3.5	7/3.5		7/3.5		3.5
FPU7/4	7/4		7/4		4
FPU7/5.5	7/5.5		7/5.5		5.5
FPU8/3.5	8/3.5		8/3.5		3.5
FPU8/6	8/6		8/6		6
FPU10/6	10/6		10/6		6
FPU10/8	10/8		10/8		8
FPU12/8	12/8		12/8		8
FPU12/10	12/10		12/10		10
FPU14/10	14/10		14/10		10
FPU14/12	14/12		14/12		12
FPU16/12	16/12		16/12		12
FPU16/13	16/13		16/13		13
FPU16/14	16/14		16/14		14
FPU18/15	18/15		18/15		15
FPU20/14	20/14		20/14		14
FPU20/15	20/15		20/15		15
FPU20/16	20/16		20/16		16
Overall   Dimensions
모델	A	B	C	D	E	F
FPU03	31.9	6.9	10	11.1	3.2	2.1
FPU04	31.9	6.9	10	11.1	4.2	2.8/2.5
FPU05	35.4	8.9	12	12.8	5.2	3.5/2.1
FPU06	35.4	8.9	12	12.8	6.2	4
FPU07	41	11.5	14	15.4	7.2	5.5/4/3.5
FPU08	41	11.5	14	15.4	8.2	6/3.5
FPU10	42	14	18	18.3	10.2	08/06
FPU12	49.5	15.8	19	20.7	12.2	10/08
FPU14	50.5	18	22	23	14.3	12/10
FPU16	55	20	25	25.1	16.2	14/13/12

선정 가이드

Selecting an HDPE straight coupling

제품별 문의를 준비하고 주문하기 전에 적합성 검사, 테스트 및 문서화 질문을 해결하기 위해 이 체크포인트를 활용하세요.

1. Measure both tubesProvide actual OD/ID and material for both sides of the joint.
2. Choose the FPU codeMatch the published OD/ID row and request the corresponding drawing.
3. Set the installation boundaryState blowing temperature, operating pressure, leak and pull-test requirements.
4. Request current evidenceConfirm the exact model, standard documents, packing, quantity and quotation terms.

자주 묻는 질문

자주 묻는 질문

What is a microduct HDPE straight coupling used for?

It joins two compatible tube sections so a fiber-optic microduct route can continue through a straight joint.

Which tube materials are listed?

The source lists HDPE, PE, nylon and polyurethane. Confirm both tube materials with the selected FPU code.

What sizes are published?

The table includes FPU combinations for tube outside diameters from approximately 3 to 20 mm.

What pressure data is stated?

The supplier states 0-1.6 MPa operating pressure, 2.5 MPa proof pressure and a 400 N pull test. Confirm the test method.

Is IP68 published for this coupling?

IP68 is stated on the source page. Request current evidence for the exact quoted model when it is a project requirement.

What information is needed for a quotation?

Send both tube dimensions and materials, route conditions, blowing and pressure tests, target quantity, packing and document requirements.