Microduct Connectors
Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: DESCRIPTION： Microduct Straight connectors, which guarantee a good performance. Transparent body allows verification of the micro-ducts position inside. Safety clips,tamper evident, are pre-installed. Tested & comply with EN 50411-2-8. MAIN FEATURES： ① Safety clips included ② Push-ft technology ③ Working Pressure: max. 25 bars
MICRODUCT CONNECTORS
This microduct HDPE straight coupling is presented for joining compatible fiber-optic tubes with a transparent body that supports position checking.
The source lists push-fit technology, preinstalled safety clips, a zinc-alloy cartridge and FPU sizes for 3-20 mm tube outside diameters. Published pressure, IP68 and EN 50411-2-8 statements remain supplier-stated and should be confirmed for the selected code.
TECHNICAL DETAILS
|
|
Components | ||||
| 1 | Collet | POM | ||||
| 2 | Locking Clip | POM | ||||
| 3 | Cartridge | ZINK ALLOY | ||||
| 4 | Lock Claw | SUS301/304 | ||||
| 5 | Support Ring | POM | ||||
| 6 | Seal Ring | TEP | ||||
| 7 | Body | PC2807 | ||||
| Fit Tube | ||||||
| Pipe material | HDPE、PE、Nylon、Polyurethane | |||||
| Outer diameter of pipe | Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ14,Φ16 | |||||
| Technical Parameter | ||||||
| Working with fluids | Air | |||||
| Tightness | 0.15~0.8MPa No Leak | |||||
| Pull test | 400N | |||||
| Proof pressure | 2.5MPa | |||||
| Operating pressure range | 0~1.6MPa | |||||
| Ambient temperature and fluid temperature | -40~60℃ | |||||
| Installation Temperature | -10℃/+50℃ | |||||
| Recommended Blowing Temperature | -15℃/+35℃ | |||||
| Degree of protection | IP68 | |||||
| UV-resistant grade | F1 | |||||
| Insertion force | 50N max(5kg) | |||||
| Lifespan: | 25 years | |||||
| StAndards: | EN 50411-2-8 | |||||
| Specifications And Dimensions | ||||||
| ANMASPC Code | Pipe OD/ID | Pipe OD/ID | Tapered hole | |||
| FPU3/2.1 | 3/2.1 | 3/2.1 | 2.1 | |||
| FPU4/2.5 | 4/2.5 | 4/2.5 | 2.5 | |||
| FPU4/2.8 | 4/2.8 | 4/2.8 | 2.8 | |||
| FPU5/2.1 | 5/2.1 | 5/2.1 | 2.1 | |||
| FPU5/3.5 | 5/3.5 | 5/3.5 | 3.5 | |||
| FPU6/4 | 6/4 | 6/4 | 4 | |||
| FPU7/3.5 | 7/3.5 | 7/3.5 | 3.5 | |||
| FPU7/4 | 7/4 | 7/4 | 4 | |||
| FPU7/5.5 | 7/5.5 | 7/5.5 | 5.5 | |||
| FPU8/3.5 | 8/3.5 | 8/3.5 | 3.5 | |||
| FPU8/6 | 8/6 | 8/6 | 6 | |||
| FPU10/6 | 10/6 | 10/6 | 6 | |||
| FPU10/8 | 10/8 | 10/8 | 8 | |||
| FPU12/8 | 12/8 | 12/8 | 8 | |||
| FPU12/10 | 12/10 | 12/10 | 10 | |||
| FPU14/10 | 14/10 | 14/10 | 10 | |||
| FPU14/12 | 14/12 | 14/12 | 12 | |||
| FPU16/12 | 16/12 | 16/12 | 12 | |||
| FPU16/13 | 16/13 | 16/13 | 13 | |||
| FPU16/14 | 16/14 | 16/14 | 14 | |||
| FPU18/15 | 18/15 | 18/15 | 15 | |||
| FPU20/14 | 20/14 | 20/14 | 14 | |||
| FPU20/15 | 20/15 | 20/15 | 15 | |||
| FPU20/16 | 20/16 | 20/16 | 16 | |||
| Overall Dimensions | ||||||
 |
||||||
| Model | A | B | C | D | E | F |
| FPU03 | 31.9 | 6.9 | 10 | 11.1 | 3.2 | 2.1 |
| FPU04 | 31.9 | 6.9 | 10 | 11.1 | 4.2 | 2.8/2.5 |
| FPU05 | 35.4 | 8.9 | 12 | 12.8 | 5.2 | 3.5/2.1 |
| FPU06 | 35.4 | 8.9 | 12 | 12.8 | 6.2 | 4 |
| FPU07 | 41 | 11.5 | 14 | 15.4 | 7.2 | 5.5/4/3.5 |
| FPU08 | 41 | 11.5 | 14 | 15.4 | 8.2 | 6/3.5 |
| FPU10 | 42 | 14 | 18 | 18.3 | 10.2 | 08/06 |
| FPU12 | 49.5 | 15.8 | 19 | 20.7 | 12.2 | 10/08 |
| FPU14 | 50.5 | 18 | 22 | 23 | 14.3 | 12/10 |
| FPU16 | 55 | 20 | 25 | 25.1 | 16.2 | 14/13/12 |
PRODUCT DETAIL IMAGES
The original product detail images are retained for visual reference. Confirm the quoted model, dimensions and test requirements before ordering.
SELECTION GUIDE
Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.
OEM & PROJECT CAPABILITY
Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.
B2B SOURCING SUPPORT
The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:
Company-level support and commercial terms should be reconfirmed for the selected product and order.
FAQ
It joins two compatible tube sections so a fiber-optic microduct route can continue through a straight joint.
The source lists HDPE, PE, nylon and polyurethane. Confirm both tube materials with the selected FPU code.
The table includes FPU combinations for tube outside diameters from approximately 3 to 20 mm.
The supplier states 0-1.6 MPa operating pressure, 2.5 MPa proof pressure and a 400 N pull test. Confirm the test method.
IP68 is stated on the source page. Request current evidence for the exact quoted model when it is a project requirement.
Send both tube dimensions and materials, route conditions, blowing and pressure tests, target quantity, packing and document requirements.
EXPLORE MORE
Introducing the Direct Buried Straight Connector from Zhejiang Oulu Automatic Equipment Co., Ltd. Designed specifically for seamless connections between microducts, our innovative system ensures an easy and fast setup, making it ideal for various applications. The robust construction of our...
Introducing the Divisible Mini Micro Duct Seal from Zhejiang Oulu Automatic Equipment Co., Ltd. This innovative sealing solution is designed to provide optimal protection for small ducts, ensuring effective management of airflow while preventing the ingress of dust, moisture, and...
Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Description: Simplex plugs effectively seal HDPE ducts occupied with a single cable. These plugs are removable & reusable. Proper sealing around cable in conduits And subducts is important to prevent the costly...
NEED ASSISTANCE?