اتصالات میکروداکت

رابط مستقیم پلی‌اتیلن

شرکت تجهیزات اتوماتیک ژجیانگ اولو (Zhejiang Oulu Automatic Equipment Co., Ltd.) شرح کوتاه: توضیحات: اتصالات مستقیم میکروداکت که عملکرد خوب را تضمین می‌کنند. بدنه شفاف امکان بررسی موقعیت میکروداکت‌ها را در داخل فراهم می‌کند. گیره‌های ایمنی، دارای قابلیت آشکارسازی دستکاری، از پیش نصب شده‌اند. تست شده و مطابق با استاندارد EN 50411-2-8. ویژگی‌های اصلی: ① شامل گیره‌های ایمنی ② فناوری فشاری (Push-fit) ③ فشار کاری: حداکثر ۲۵ بار  

دسته‌بندیاتصالات میکروداکت

اتصالات میکرو داکت

Microduct HDPE straight coupling with a zinc-alloy cartridge

This microduct HDPE straight coupling is presented for joining compatible fiber-optic tubes with a transparent body that supports position checking.

The source lists push-fit technology, preinstalled safety clips, a zinc-alloy cartridge and FPU sizes for 3-20 mm tube outside diameters. Published pressure, IP68 and EN 50411-2-8 statements remain supplier-stated and should be confirmed for the selected code.

جزئیات فنی

اطلاعات محصول منتشر شده

مورد اطلاعات منتشر شده
Product type Straight push-fit microduct coupling
Published tube materials HDPE, PE, nylon and polyurethane
Published size coverage FPU codes for approximately 3-20 mm tube outside diameters
Supplier-stated performance 0-1.6 MPa operating pressure, 2.5 MPa proof pressure and 400 N pull test
Protection / standard statements IP68, UV-resistant grade F1 and EN 50411-2-8 stated

راهنمای انتخاب

Selecting an HDPE straight coupling

از این نقاط بازبینی برای آماده‌سازی پرس‌و‌ش‌های مربوط به محصول استفاده کنید و قبل از سفارش، سوالات مربوط به تطابق، تست و مدارک را حل کنید.

  1. Measure both tubesProvide actual OD/ID and material for both sides of the joint.
  2. Choose the FPU codeMatch the published OD/ID row and request the corresponding drawing.
  3. Set the installation boundaryState blowing temperature, operating pressure, leak and pull-test requirements.
  4. Request current evidenceConfirm the exact model, standard documents, packing, quantity and quotation terms.

قابلیت تولید بر اساس سفارش و پروژه

توانایی شرکت در تأمین تجهیزات مخابراتی

Oulu Automatic Equipment خود را به عنوان تامین کننده اتصالات میکروکول، سیستم‌های میکروکول HDPE، لوازم جانبی برای باد کردن کابل و اتصالات پنوماتیک برای پیمانکاران، توزیع‌کنندگان و شرکای OEM معرفی می‌کند.

توانایی‌های شرکت را بررسی کنید

بازرسی کیفیت برای تأمین کننده اتصالات میکرودیو Oulu
بسته بندی انبار برای سفارشات اتصالات میکرودک Oulu

پشتیبانی از تامینکنندگان B2B

حمایت از خرید B2B

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:

  • Provide actual OD/ID and material for both sides of the joint.
  • مقدار هدف، ترکیب مدل یا سایز، نیاز به نمونه و ترجیحات بسته بندی.
  • نقشه‌ها، شرایط مسیر، آزمایش‌های فشاری یا ضد نشت و مدارک انطباق.
  • حداقل مقدار خرید فعلی، قیمت، هزینه حمل و نقل، زمان تحویل نمونه و زمان تولید باید در نقل قول تأیید شوند.

حمایت از سطح شرکت و شرایط تجاری باید برای محصول و سفارش انتخاب شده تایید شوند.

ابعاد، شرایط مسیر و مقدار یک محصول را برای دریافت یک قیمت مشخص به اشتراک بگذارید.ارسال نیازهای محصول

حمایت از پروژه

طراحی درستترین راه حل برای لوله‌های میکرونیت

بررسی راهکارهای مسیر میکرودک و خدمت صفحات مربوط به زمینه پروژه، سپس تطابق دقیق، اسناد و شرایط تجاری در پیشنهاد قیمت تأیید کنید.

برنامه خود را مطرح کنید

پرسش‌های متداول

سوالات متداول

What is a microduct HDPE straight coupling used for?

It joins two compatible tube sections so a fiber-optic microduct route can continue through a straight joint.

Which tube materials are listed?

The source lists HDPE, PE, nylon and polyurethane. Confirm both tube materials with the selected FPU code.

What sizes are published?

The table includes FPU combinations for tube outside diameters from approximately 3 to 20 mm.

What pressure data is stated?

The supplier states 0-1.6 MPa operating pressure, 2.5 MPa proof pressure and a 400 N pull test. Confirm the test method.

Is IP68 published for this coupling?

IP68 is stated on the source page. Request current evidence for the exact quoted model when it is a project requirement.

What information is needed for a quotation?

Send both tube dimensions and materials, route conditions, blowing and pressure tests, target quantity, packing and document requirements.