اتصالات میکروداکت

درپوش اتصالات میکروکت فایبر ۷ میلی‌متری

شرکت تجهیزات اتوماتیک ژجیانگ اولو (Zhejiang Oulu Automatic Equipment Co., Ltd.) توضیحات کوتاه: درپوش‌های شفاف استاندارد که برای مسدود کردن انتهای لوله‌ها جهت جلوگیری از نشت هوا، نفوذ آب یا سایر مواد استفاده می‌شوند. درپوش‌ها از پیش با گیره‌های امنیتی مونتاژ شده‌اند.              

دسته‌بندیاتصالات میکروداکت

اتصالات میکرو داکت

FPF7mm microduct connectors end cap for an open tube

This FPF7mm microduct connectors end cap is presented for terminating an open-ended tube.

The supplier describes a transparent end cap intended to help avoid air leakage and limit water or other material ingress. A security clip is preassembled; the captured snapshot does not publish a complete pressure or test table for this specific page.

جزئیات فنی

اطلاعات محصول منتشر شده

مورد اطلاعات منتشر شده
Product type Transparent FPF7mm microduct end cap
Nominal tube size in product name 7 mm
هدف Terminates an open tube and helps limit air leakage, water and material ingress
Retention feature Preassembled security clip
Confirm before order Measured tube dimensions, pressure requirement, test documents, quantity and packing

راهنمای انتخاب

Checking an FPF7mm end cap before ordering

از این نقاط بازبینی برای آماده‌سازی پرس‌و‌ش‌های مربوط به محصول استفاده کنید و قبل از سفارش، سوالات مربوط به تطابق، تست و مدارک را حل کنید.

  1. Measure the tubeConfirm the actual outside and inside diameter rather than relying only on the 7 mm name.
  2. Define the exposureState whether the cap is for storage, blowing preparation or an installed telecom route.
  3. Set the sealing testSpecify air, water or pressure requirements because the snapshot does not publish a full test table.
  4. Confirm the supplyRequest the exact FPF code, drawing, clip, quantity, packing and current terms.

قابلیت تولید بر اساس سفارش و پروژه

توانایی شرکت در تأمین تجهیزات مخابراتی

Oulu Automatic Equipment خود را به عنوان تامین کننده اتصالات میکروکول، سیستم‌های میکروکول HDPE، لوازم جانبی برای باد کردن کابل و اتصالات پنوماتیک برای پیمانکاران، توزیع‌کنندگان و شرکای OEM معرفی می‌کند.

توانایی‌های شرکت را بررسی کنید

بازرسی کیفیت برای تأمین کننده اتصالات میکرودیو Oulu
بسته بندی انبار برای سفارشات اتصالات میکرودک Oulu

پشتیبانی از تامینکنندگان B2B

حمایت از خرید B2B

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:

  • Confirm the actual outside and inside diameter rather than relying only on the 7 mm name.
  • مقدار هدف، ترکیب مدل یا سایز، نیاز به نمونه و ترجیحات بسته بندی.
  • نقشه‌ها، شرایط مسیر، آزمایش‌های فشاری یا ضد نشت و مدارک انطباق.
  • حداقل مقدار خرید فعلی، قیمت، هزینه حمل و نقل، زمان تحویل نمونه و زمان تولید باید در نقل قول تأیید شوند.

حمایت از سطح شرکت و شرایط تجاری باید برای محصول و سفارش انتخاب شده تایید شوند.

ابعاد، شرایط مسیر و مقدار یک محصول را برای دریافت یک قیمت مشخص به اشتراک بگذارید.ارسال نیازهای محصول

حمایت از پروژه

طراحی درستترین راه حل برای لوله‌های میکرونیت

بررسی راهکارهای مسیر میکرودک و خدمت صفحات مربوط به زمینه پروژه، سپس تطابق دقیق، اسناد و شرایط تجاری در پیشنهاد قیمت تأیید کنید.

برنامه خود را مطرح کنید

پرسش‌های متداول

سوالات متداول

What is an FPF7mm microduct end cap used for?

It terminates an open tube and is presented as protection against air leakage, water or other material ingress.

Is the FPF7mm end cap transparent?

Yes. The supplier describes a standard transparent end cap so the tube position can be visually checked.

Does it include a security clip?

The captured product description states that the end cap is preassembled with a security clip.

Is 7 mm the only measurement needed?

No. Confirm the actual tube outside and inside diameter and the required fit before ordering.

What pressure rating does this page publish?

The captured snapshot does not include a complete product-specific pressure table. Request current test data for the quoted cap.

What should a B2B enquiry include?

Provide tube dimensions, route exposure, sealing test, quantity, packing and any drawing or document requirement.