គម្របបញ្ចប់បំពង់តូច

Transparent microduct ending cap for open tube termination

This transparent microduct ending cap is presented for terminating open tubes to help avoid air leakage and the ingress of water or other material.

Supplier data lists a preassembled safety clip, push-fit connection, a maximum working pressure of 25 bar and published FPF sizes from 3–20 mm outside diameter.

Key details

							សមាសធាតុ
							1	កុលឡេត		POM
							2	ឈុតចាក់សោ		POM
							3	ប្រអប់ព្រីនធឺរ		យ៉ាន់ស្ព័រស័ង្កសី
							4	ក្រញ៉ាំចាក់សោ		SUS301/304
							5	ចិញ្ចៀនទ្រទ្រង់		POM
							6	ចិញ្ចៀនផ្សាភ្ជាប់		ទេពអប្សរ
							7	រាងកាយ		PC2807
បំពង់សម
សម្ភារៈបំពង់						HDPE、PE、Nylon、Polyurethane
អង្កត់ផ្ចិតខាងក្រៅនៃបំពង់						Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ16,Φ18,Φ20
Technical Parameter
ធ្វើការជាមួយសារធាតុរាវ						ខ្យល់
ភាពតឹងតែង						0.15~0.8MPa គ្មានការលេចធ្លាយ
ការធ្វើតេស្តទាញ						៤០០N
សម្ពាធភស្តុតាង						២.៥ មេហ្គាប៉ា
ជួរសម្ពាធប្រតិបត្តិការ						០~១.៦មេហ្គាប៉ា
សីតុណ្ហភាពព័ទ្ធជុំវិញ និងសីតុណ្ហភាពសារធាតុរាវ						-40~60℃
សីតុណ្ហភាពដំឡើង						-10℃/+50℃
សីតុណ្ហភាពផ្លុំដែលបានណែនាំ						-15℃/+35℃
កម្រិតនៃការការពារ						ការការពារទឹកជ្រាប IP68
ថ្នាក់ធន់នឹងកាំរស្មីយូវី						F1
កម្លាំងបញ្ចូល						អតិបរមា 50N (5 គីឡូក្រាម)
អាយុកាល៖						២៥ ឆ្នាំ
សាំងដាដស៍៖						EN 50411-2-8
លក្ខណៈបច្ចេកទេស និងវិមាត្រ
លេខកូដ ANMASPC						OD/ID
FPF3						3
FPF4						4
FPF5						5
FPF6						6
FPF7						7
FPF8						8
FPF10						10
FPF12						12
FPF14						14
FPF16						16
FPF18						18
FPF20						20
វិមាត្ររួម
ម៉ូដែល		A		B		C		D		E
FPF3		14.5		8.3		8		5.5		3.2
FPF5		18.2		11.8		10.7		6.1		5.2
FPF7		19.4		14.8		13.4		11		7.3
FPF8		19.4		14.8		13.4		11		8.3
FPF10		21.5		16.8		15.7		13.2		10.3
FPF12		23.5		19		17.5		15.4		12.4
FPF14		24.9		21.3		19.7		17.4		14.5
FPF16		27.6		24.4		23		20		16.5
FPF18		36.5		29		27.6		22.5		18.5
FPF20		42.5		33.5		30.5		25.6		20.6

Choosing an ending cap for an open microduct

Use these checkpoints to prepare a product-specific enquiry and avoid selecting by a general trade name alone.

1. Measure the open tube: Provide the outside diameter and confirm the matching FPF article code within the published 3–20 mm range.
2. Describe the environment: State whether the cap is for storage, installation, a chamber or another telecom route location.
3. Confirm the pressure need: Compare the published 25 bar maximum with the actual operating or test condition.
4. Plan procurement: Request the exact size, quantity, packing, sample and documentation in one enquiry.

OEM & PROJECT CAPABILITY

Company capability for telecom supply

Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.

Explore company capabilities

B2B SOURCING SUPPORT

B2B purchasing support

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. For a product-specific enquiry, include:

• Provide the outside diameter and confirm the matching FPF article code within the published 3–20 mm range.
• Target quantity by size or model, sample needs, mixed specifications and packing preference.
• Project drawings, pressure or sealing requirements, and required compliance or export documents.
• Current MOQ, payment, freight, sample timing and production timing to be confirmed in the quotation.

Company-level service statements and commercial terms should be reconfirmed for the selected product and order.

Share dimensions, route conditions and quantities for a product-specific quotation.
Send product requirements

PRODUCT DETAIL IMAGES

Product Detail

សំណួរដែលសួរញឹកញាប់

What is a microduct used for?

A microduct provides a protected path for a telecom or fiber cable. An ending cap closes the tube while it is open or unused.

What is a microduct ending cap used for?

It terminates an open tube and is described as helping avoid air leakage and the ingress of water or other material.

What are the standard sizes of microducts?

Sizes vary by network. This ending-cap family publishes FPF3–FPF20 versions for 3–20 mm outside diameter.

How is a push-fit microduct end cap installed?

The supplier describes a push-fit cap with a preassembled safety clip. Confirm tube preparation, insertion and removal steps for the selected size.

What pressure rating does the ending cap have?

The supplier publishes a maximum working pressure of 25 bar. Request the applicable test data for the project’s pressure condition.

How do I request the correct FTTH duct end seal?

Send the tube outside diameter, material, route environment, pressure or sealing requirement, quantity and requested documentation.