Концевая заглушка для микротрубки

Transparent microduct ending cap for open tube termination

This transparent microduct ending cap is presented for terminating open tubes to help avoid air leakage and the ingress of water or other material.

Supplier data lists a preassembled safety clip, push-fit connection, a maximum working pressure of 25 bar and published FPF sizes from 3–20 mm outside diameter.

Key details

Choosing an ending cap for an open microduct

Use these checkpoints to prepare a product-specific enquiry and avoid selecting by a general trade name alone.

1. Measure the open tube: Provide the outside diameter and confirm the matching FPF article code within the published 3–20 mm range.
2. Describe the environment: State whether the cap is for storage, installation, a chamber or another telecom route location.
3. Confirm the pressure need: Compare the published 25 bar maximum with the actual operating or test condition.
4. Plan procurement: Request the exact size, quantity, packing, sample and documentation in one enquiry.

OEM & PROJECT CAPABILITY

Company capability for telecom supply

Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.

Explore company capabilities

B2B SOURCING SUPPORT

B2B purchasing support

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. For a product-specific enquiry, include:

• Provide the outside diameter and confirm the matching FPF article code within the published 3–20 mm range.
• Target quantity by size or model, sample needs, mixed specifications and packing preference.
• Project drawings, pressure or sealing requirements, and required compliance or export documents.
• Current MOQ, payment, freight, sample timing and production timing to be confirmed in the quotation.

Company-level service statements and commercial terms should be reconfirmed for the selected product and order.

Share dimensions, route conditions and quantities for a product-specific quotation.
Send product requirements

PRODUCT DETAIL IMAGES

Product Detail

ЧаВо

What is a microduct used for?

A microduct provides a protected path for a telecom or fiber cable. An ending cap closes the tube while it is open or unused.

What is a microduct ending cap used for?

It terminates an open tube and is described as helping avoid air leakage and the ingress of water or other material.

What are the standard sizes of microducts?

Sizes vary by network. This ending-cap family publishes FPF3–FPF20 versions for 3–20 mm outside diameter.

How is a push-fit microduct end cap installed?

The supplier describes a push-fit cap with a preassembled safety clip. Confirm tube preparation, insertion and removal steps for the selected size.

What pressure rating does the ending cap have?

The supplier publishes a maximum working pressure of 25 bar. Request the applicable test data for the project’s pressure condition.

How do I request the correct FTTH duct end seal?

Send the tube outside diameter, material, route environment, pressure or sealing requirement, quantity and requested documentation.