マイクロダクト エンドキャップ

Transparent microduct ending cap for open tube termination

This transparent microduct ending cap is presented for terminating open tubes to help avoid air leakage and the ingress of water or other material.

Supplier data lists a preassembled safety clip, push-fit connection, a maximum working pressure of 25 bar and published FPF sizes from 3–20 mm outside diameter.

Key details

							コンポーネント
							1	コレット		POM
							2	ロッキングクリップ		POM
							3	カートリッジ		亜鉛合金
							4	ロック・クロウ		SUS301/304
							5	サポートリング		POM
							6	シグネットリング		TEP
							7	本文		PC2807
フィットチューブ
配管材料						HDPE、PE、Nylon、Polyurethane
配管の外径						Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ16,Φ18,Φ20
Technical Parameter
流体の取り扱い						空気
締め付け感						0.15～0.8MPa 漏れなし
引張り試験						400N
耐圧						2.5MPa
使用圧力範囲						0〜1.6MPa
周囲温度と流体温度						-40~60℃
設置温度						-10℃/+50℃
推奨ブロー温度						-15℃/+35℃
保護等級						IP68
耐候性グレード						F1
挿入力						最大50N（5kg）
寿命						25年
基準：						EN 50411-2-8
仕様と寸法
ANMASPCコード						外径/内径
FPF3						3
FPF4						4
FPF5						5
FPF6						6
FPF7						7
FPF8						8
FPF10						10
FPF12						12
FPF14						14
FPF16						16
FPF18						18
FPF20						20
全体寸法
モデル		A		B		C		D		E
FPF3		14.5		8.3		8		5.5		3.2
FPF5		18.2		11.8		10.7		6.1		5.2
FPF7		19.4		14.8		13.4		11		7.3
FPF8		19.4		14.8		13.4		11		8.3
FPF10		21.5		16.8		15.7		13.2		10.3
FPF12		23.5		19		17.5		15.4		12.4
FPF14		24.9		21.3		19.7		17.4		14.5
FPF16		27.6		24.4		23		20		16.5
FPF18		36.5		29		27.6		22.5		18.5
FPF20		42.5		33.5		30.5		25.6		20.6

Choosing an ending cap for an open microduct

Use these checkpoints to prepare a product-specific enquiry and avoid selecting by a general trade name alone.

1. Measure the open tube: Provide the outside diameter and confirm the matching FPF article code within the published 3–20 mm range.
2. Describe the environment: State whether the cap is for storage, installation, a chamber or another telecom route location.
3. Confirm the pressure need: Compare the published 25 bar maximum with the actual operating or test condition.
4. Plan procurement: Request the exact size, quantity, packing, sample and documentation in one enquiry.

OEMおよびプロジェクト能力

通信インフラ供給における企業の能力

オウル自動装置は、通信事業者、代理店、およびOEMパートナー向けのマイクロダクトコネクタ、HDPEマイクロダクトシステム、ケーブルブローアクセサリー、および空気圧継手のサプライヤーとして自らをPRしています。.

会社の能力を調査する

B2B ソース検索サポート

B2B購買支援

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. For a product-specific enquiry, include:

• Provide the outside diameter and confirm the matching FPF article code within the published 3–20 mm range.
• Target quantity by size or model, sample needs, mixed specifications and packing preference.
• Project drawings, pressure or sealing requirements, and required compliance or export documents.
• Current MOQ, payment, freight, sample timing and production timing to be confirmed in the quotation.

Company-level service statements and commercial terms should be reconfirmed for the selected product and order.

製品固有の見積もりに必要な寸法、ルート条件、数量を共有します。.
製品の要件を送信する

製品詳細画像

製品詳細

よくある質問

What is a microduct used for?

A microduct provides a protected path for a telecom or fiber cable. An ending cap closes the tube while it is open or unused.

What is a microduct ending cap used for?

It terminates an open tube and is described as helping avoid air leakage and the ingress of water or other material.

What are the standard sizes of microducts?

Sizes vary by network. This ending-cap family publishes FPF3–FPF20 versions for 3–20 mm outside diameter.

How is a push-fit microduct end cap installed?

The supplier describes a push-fit cap with a preassembled safety clip. Confirm tube preparation, insertion and removal steps for the selected size.

What pressure rating does the ending cap have?

The supplier publishes a maximum working pressure of 25 bar. Request the applicable test data for the project’s pressure condition.

How do I request the correct FTTH duct end seal?

Send the tube outside diameter, material, route environment, pressure or sealing requirement, quantity and requested documentation.