マイクロダクトコネクタ
HDPEストレートコネクタ
浙江欧鲁自动化设备有限公司 简短说明： 描述：微管直通接头，性能优良。透明管体便于确认微管在内部的位置。预装有防篡改安全夹。经过测试并符合 EN 50411-2-8 标准。 主要特点：① 含安全夹 ② 推入式技术 ③ 工作压力：最大 25 巴
カテゴリマイクロダクトコネクタ
MICRODUCT CONNECTORS
Microduct HDPE straight connectors for air-blown fiber routes
These microduct HDPE straight connectors are presented for joining compatible tubes in air-blown fiber and telecom routes.
The source lists a transparent body, push-fit technology, preinstalled safety clips and a POM cartridge. FPU combinations cover tube outside diameters from 3 to 20 mm; confirm the measured OD/ID and project test conditions before ordering.
TECHNICAL DETAILS
Published product facts
| アイテム | Published information |
|---|---|
| Product type | Straight push-fit microduct connector |
| Published tube materials | HDPE, PE, nylon and polyurethane |
| Published size coverage | FPU codes for approximately 3-20 mm tube outside diameters |
| Supplier-stated performance | 0-1.6 MPa operating pressure, 2.5 MPa proof pressure and 400 N pull test |
| Blowing / protection statements | Recommended blowing temperature -15 to 35 °C; IP68 and EN 50411-2-8 stated |
PRODUCT DETAIL IMAGES
Product Detail
The original product detail images are retained for visual reference. Confirm the quoted model, dimensions and test requirements before ordering.
SELECTION GUIDE
Specifying a straight connector for air-blown fiber
Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.
-
Measure the tubesSend OD/ID, wall condition and material for both microducts.
-
Match the article codeUse the published FPU table to identify the candidate size and request its drawing.
-
Describe the blowing planState blowing temperature, pressure, cable and leak-test requirements.
-
Close the procurement pointsConfirm sample, quantity, packing, current documents and delivery terms.
OEM & PROJECT CAPABILITY
Company capability for telecom supply
Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.
B2B SOURCING SUPPORT
B2B purchasing support
The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:
- Send OD/ID, wall condition and material for both microducts.
- Target quantity, model or size mix, sample needs and packing preference.
- Drawings, route conditions, pressure or sealing tests and compliance documents.
- Current MOQ, price, freight, sample timing and production timing to be confirmed in the quotation.
Company-level support and commercial terms should be reconfirmed for the selected product and order.
Share dimensions, route conditions and quantities for a product-specific quotation.Send product requirements
よくある質問
よくある質問
What are microduct HDPE straight connectors used for?
They join compatible microduct sections in a straight air-blown fiber or telecom route.
How do I select an FPU connector size?
Provide the measured outside and inside diameter of both tubes and match them to the published FPU row.
Can a connector affect fiber blowing performance?
Joint alignment, tube fit and sealing matter to the route. Confirm the correct FPU code and installation procedure before blowing.
What pressure data is published?
The supplier states 0-1.6 MPa operating pressure, 2.5 MPa proof pressure and air tightness from 0.15 to 0.8 MPa.
What blowing temperature is stated?
The source recommends -15 to 35 °C for blowing. Confirm that range against the project method.
What should accompany a connector enquiry?
Send tube measurements and materials, blowing conditions, pressure and pull tests, quantity, packing and required documents.
もっと見る
関連商品
-
HDPEストレートマイクロダクトコネクタ エアブロー製品用光コネクタ
浙江欧陆自动化设备有限公司 概要： 説明： マイクロダクト用ストレートコネクタは、優れた性能を保証します。透明な本体により、マイクロダクト内部の位置を確認できます。不正開封防止用の安全クリップが事前に取り付けられています。EN 50411-2-8のテスト済みで準拠しています。 主な特徴： ①...
-
マイクロダクトコネクター カプラー エンドキャップ 亜鉛合金
浙江欧陆自动化设备有限公司 簡単な説明：亜鉛合金製のマイクロダクトコネクタエンドキャップは、マイクロダクト接続部を耐久性と安全性に優れ確実にシールします。頑丈な構造により、ネットワークインフラストラクチャの信頼性の高い保護と効率性が確保されます。.
-
エンドプラグ シール プラスチックキャップ
浙江欧鲁自动化设备有限公司 概要： 説明：軟質PVCキャップは、ダクト端部に防塵保護を提供します。耐候性および紫外線に対して優れた耐性を持っています。輸送、保管、または据付期間中の使用に最適です...