2-way 14/10 mm direct-buried HDPE microduct tube bundle
This 2-way DB HDPE tube bundle is presented for FTTH and underground fiber cable blowing routes.
The source states 14 mm sub-duct OD, 10 mm ID, 1.2 mm wall or sheath, a 30.4 mm x 16.4 mm bundle profile and at least 1,350 N inner tensile strength. The table also states 25 bar pressurization and supplier test values; confirm the current drawing and batch evidence.
TECHNICAL DETAILS
Published product facts
Artigo
Published information
Product type
2-way direct-buried HDPE microduct bundle
Inner microduct
14 mm outside diameter and 10 mm inside diameter
Blowing clearance
An 8.5 mm steel ball is stated to pass freely through the duct
Bundle profile
30.4 mm x 16.4 mm plus or minus 0.5 mm
Supplier-stated mechanics
At least 1,350 N inner tensile, 1,400 N crush and 1.5 J impact are shown
Temperature statements
Storage and operation -40 to 70 C; installation -30 to 50 C
PRODUCT DETAIL IMAGES
Product Detail
The original product detail images are retained for visual reference. Confirm the quoted model, dimensions and test requirements before ordering.
SELECTION GUIDE
Selecting a 2-way 14/10 mm microduct bundle
Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.
Confirm the two pathwaysMatch two 14/10 mm ducts to the cable and spare requirement.
Check clearanceConfirm the 10 mm ID and 8.5 mm blowing-ball clearance stated in the table.
Plan the routeUse the 30.4 mm x 16.4 mm profile and confirmed bend limits.
Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.
The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:
Match two 14/10 mm ducts to the cable and spare requirement.
Target quantity, model or size mix, sample needs and packing preference.
Drawings, route conditions, pressure or sealing tests and compliance documents.
Current MOQ, price, freight, sample timing and production timing to be confirmed in the quotation.
Company-level support and commercial terms should be reconfirmed for the selected product and order.
Share dimensions, route conditions and quantities for a product-specific quotation.Send product requirements
PROJECT SUPPORT
Plan the right microduct solution
Review the microduct route solutions e Serviço pages for project context, then confirm exact fit, documents and commercial terms in the quotation.
Zhejiang Oulu Automatic Equipment Co., Ltd.
Breve descrição:
Detalhes essenciais
Número do modelo: Feixe de tubos DB 7 vias 12/8mm
Tipo: Microduto e feixe de tubos
Local de origem: Wenzhou, China
Marca: ANMASPC
Uso: FTTH, Instalação de cabos
Tempo de garantia: 12 meses
Rede: Nenhum
Diâmetro interno do subduto: 8mm
Diâmetro externo do subduto...
Zhejiang Oulu Automatic Equipment Co., Ltd. Breve descrição: Detalhes essenciais Número do modelo: Feixe de tubos DB de 7 vias 12/10 mm Tipo: Feixe de tubos Local de origem: Xangai, China Nome da marca: ANMASPC Uso: FTTH Tempo de garantia: 12 meses Rede: Nenhuma Diâmetro interior do subconduto: 10 mm Diâmetro exterior do subconduto: 12 mm Bainha de PE: 3,4 mm Exterior...
Zhejiang Oulu Automatic Equipment Co., Ltd.
Descrição Breve:
Número do Modelo: Feixe de tubos DB de 4 vias
Local de Origem: Wenzhou, China
Nome da Marca: ANMASPC
*Resistente ao envelhecimento, anticorrosão de produtos químicos.
*O subtubo de HDPE é conveniente na construção, poupa tempo e o custo do projeto.
*Impermeável, à prova de humidade, microduto para sopro de fibra...
