HDPE 마이크로덕트

HDPE Pipe Tube 2ways 14/10mm

Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number:2ways 14/10mm DB Tube Bundle Type:Micro Duct & Tube Bundle Place of Origin:Wemzhou, China Brand Name:ANMASPC Use:FTTH Warranty Time:12months Network:None Sub duct Inner diameter:10mm Sub duct outer diameter:14mm Thickness:1.2mm Outer Diameter::30.4mm * 16.4mm (±0.5mm) Melt flow index:0.1 ~ 0.4 g/10 minutes Density:Min. 0.940 g/cm3 Tensile strength at yield:Min. 20MPa Elongation at the break:Min 350% Environmental stress crack resist (F50):Min FOB Price: US $0.5 - 9,999 / Piece Min.Order Quantity: 100 Piece/Pieces Supply Ability: 10000 Piece/Pieces per Month

카테고리HDPE 마이크로덕트

문의하기 제품 상세 정보

제품 상세 정보

간단한 설명:

Essential details

Model Number:2ways 14/10mm DB Tube Bundle

마이크로 덕트 및 튜브 번들

Place of Origin:Wemzhou, China

ANMASPC

Use:FTTH

Warranty Time:12months

Network:None

Sub duct Inner diameter:10mm

Sub duct outer diameter:14mm

Thickness:1.2mm

Outer Diameter::30.4mm * 16.4mm (Â±0.5mm)

Melt flow index:0.1 ~ 0.4 g/10 minutes

Density:Min. 0.940 g/cm3

Tensile strength at yield:Min. 20MPa

Elongation at the break:Min 350%

Environmental stress crack resist (F50):Min

FOB 가격: US $0.5 – 9,999 / 개

최소 주문 수량 100개

공급 능력 월 10,000개

2 ways

Physical and Mechanical Properties â Inner Micro duct 14/10mm
1	시각적 외관	육안 검사	안쪽은 골이 져 있고 바깥쪽은 매끄러운 표면을 가지며, 물집, 수축공, 박리, 긁힘, 거칠음이 없어야 합니다.
2	외경	ANMASPC	14.0mm Â± 0.1mm
3	벽 두께	ANMASPC	2.00mm Â± 0.10mm
4	내경 틈새	강철 공 불기	A 8.5mm steel ball can be blown freely through the duct.
5	진원도	ANMASPC	✧ 5%
6	가압	각 덕트당 25바에서 5분	파손 및 누수 없음
7	성적 취향	IEC 60794-1-2 방법 E10	â¤ 140mm
8	인장강도	연신율 100mm/분	â¥ 1350N
9	크러시	시료 길이: 250mm Load: 1400N 최대 부하 지속 시간: 1분 회복 시간: 1시간	내경 및 외경에 15% 이상의 잔류 변형이 없어야 하며, 내경 간극 시험을 통과해야 한다.
10	영향	IEC 60794-1-2 방법 E4 1.5J Impact, recovery time 1 hour	내경 및 외경에 15% 이상의 잔류 변형이 없어야 하며, 내경 간극 시험을 통과해야 한다.
11	열회귀	110℃ ～ 23℃, 1시간	✧ 3%
12	최소 휨 반경	168mm	내경 및 외경에 15% 이상의 잔류 변형이 없어야 하며, 내경 간극 시험을 통과해야 한다.
13	마찰계수	직경 750mm, 450도 루프, 5kg 질량	≤ 0.1
14	색상 및 인쇄	육안 검사	고객 사양에 따라

1	Inner micro duct:	14/10mm
2	Outer Diameter:	30.4mm * 16.4mm (Â±0.5mm)
3	Thickness of sheathing:	1.2mm
Remarks: Ripcord are optional.

Raw materials:

HDPE of a high-molecular type with the following parameters is used for production of the Tube Bundle: – Melt flow index: 0.1 ï½ 0.4 g/10 minutes EN ISO 1133 (190 Â°C, 2.16 KG) – Density: Min. 0.940 g/cm3 ISO 1183 – Tensile strength at yield: Min. 20MPa ISO 527 – Elongation at the break: Min 350% ISO 527 – Environmental stress crack resist (F50) Min. 96 hours ISO 4599

Construction

– PE sheath: The outer sheath is manufactured from colored HDPE, halogen free. Normal outer sheath color is orange. Other color is possible upon customer request. – Micro duct: The micro duct is manufactured from HDPE, extruded from 100% virgin material. The color shall be red, green or other customized.

Pos.	Mechanical performance	Test conditions	Performance	Standard
1	인장강도 at yield	연신율 100mm/분	â¥1400N	IEC 60794-1-2 Method E1
2	크러시	시료 길이: 250mm Load: 1400N Duration of Max. load: 1 minutes 회복 시간: 1시간	The outer and inner diameter shall show, under visual examination without damage and no reduction of diameter greater than 15%.	IEC 60794-1-2 Method E3
3	성적 취향	â¤140mm	–	IEC 60794-1-2 Method E10
4	영향	Striking surface radius: 10mm Impact Energy: 1J Number of impact: 3 times 회복 시간: 1시간	Under visual examination, there shall be no damage to the micro duct.	IEC 60794-1-2 Method E4
5	Bend radius	Number of turns: 5 Mandrel diameter: 168mm Mumber of cycles: 3	The outer and inner diameter shall show, under visual examination without damage and no reduction of diameter greater than 15%.	IEC 60794-1-2 Method E11
6	Friction	/	â¤0.1	FCST

Pos.	Item	Specification
1	Appearance	Smooth outer wall (UV-stabilized) without visible impurities; well-proportioned color, no bubbles or cracks; with defined markings on outer wall.
2	인장강도	Use Pull socks to tension a sample in accordance with table below: Sample length: 1m Tensile speed: 20mm/min Load: 2200N Duration of the tension: 5 min.	No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
3	Crush Resistance	A 250mm sample after 1 minute load time and 1 hour recovery time. Load (plate) shall be 2000N. The imprint of the plate on the sheath is not considered as mechanical damage.	No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
4	영향	Striking surface radius shall be 10mm and impact energy 3J. Recovery time shall be one out. The imprint of the striking surface on the microduct is not considered as mechanical damage.	No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
5	Bend	Diameter of mandrel shall be 40X OD of sample, 4 turns, 3 cycles.	No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.

Completed packages of the HDPE Tube Bundle on drums can be stored outdoor max. 6 months upon the date of production. Storage temperature: -40Â°C ï½ +70Â°C Installation temperature: -30Â°C ï½ +50Â°C Operating temperature: -40Â°C ï½ +70Â°C

Design

– A bundle of micro- or mini-tubes (strengthened wall size) is surrounded by single thin HDPE sheath. The design makes the duct assemblies suitable for installation in other existing ducts or underground direct bury. The micro ducts are optimized for best cable blowing performance. – The inner micro duct has suitable low friction characteristics on the inside surface. The micro duct has colors according to figures 1.

HDPE Pipe Tube 2ways 14/10mm gallery image 1