Notícias e Blog

Stainless steel joints are mainly used to connect various pipes into pipes. With the rapid development of economic construction of stainless steel joints, stainless steel joints have been widely used. Through the analysis of the corrosion resistance of the passivation layer on the surface of stainless steel, combined with the application of advanced production technology and equipment, the production meets the needs of production…

An air-blown microcable route combines a protective pathway, suitable microducts, connectors and a cable approved for the installation method. Microducts may be placed in an existing main duct or installed as part of a new route; access, existing occupation, mechanical protection and the duct supplier’s instructions determine the permitted arrangement. Do not use a universal area-fill percentage as a substitute for that design. Count…

A pneumatic cylinder is an actuator that uses compressed air to move a piston and produce mechanical motion. In industrial automation it may push, lift, clamp, position or release a load. The word cylinder also appears in engine and compressor terminology, but those machines perform different jobs. This guide focuses on the pneumatic actuator and on the decisions needed to select it as part…

An HDPE compression fitting joins a compatible pipe to another pipe, valve or equipment connection by compressing the specified sealing and gripping components. Its suitability depends on the exact pipe outside diameter, wall condition, fitting design and service conditions. A familiar nut or similar-looking body does not establish pressure suitability or a leak-free installation. Before selecting one, confirm the pipe specification and the manufacturer’s…

PU hose and PA hose are two popular types of hoses used for various applications. While both serve the purpose of fluid or air transfer, they have some distinct differences in terms of their properties and performance. How do flexibility and service conditions affect PU and PA hose?One noticeable difference between PU hose and PA hose is their hardness. PU hoses are softer compared…

Micro ducts are small diameter conduits ranging from 3-16 mm outer diameter (OD) that provide a pathway for fiber cables. Our Micro duct Connectors are designed to provide simple, 2-click plug-and-play coupling of micro ducts, enabling longer runs and excellent pushing/pulling performance. The micro ducts to be linked with can be either of the same outer diameter (OD), or of different OD using hybrid…

Buyers often compare FTTR and FTTH as if they were competing access technologies. They are not. FTTH normally brings the optical access connection to a premises, while FTTR extends a fiber-based distribution path farther inside that premises. The practical choice depends on room coverage, pathway access, endpoint power, management and installation cost—not on the acronym alone. This guide gives a definition-first comparison, identifies when…

A replacement pneumatic fitting can accept the tube and still be wrong for the machine. The thread may have a different sealing form, the release sleeve may be inaccessible, or the replacement may lack approval for the actual temperature and medium. KQ2 is a named SMC one-touch fitting series; a seller's description of a KQ2-style part does not prove SMC origin or interchangeability. This…

Microduct connectors matter long after the first cable installation. A joint that is correctly sized, accessible and documented can support a later extension; an undocumented transition may require another survey or excavation before a spare pathway can be used. The development of microduct networks therefore depends on installation quality and usable records as well as connector design. For reliable blown-fiber installation, specify and test…