Microduct Endcap connectors (end coupler，end stop） gallery image 1

Microduct Connectors

Microduct Endcap connectors (end coupler，end stop）

Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description:   ● Resistant to high pressures for blowing micro cables through guide tubes ● Resistant to corrosion and most chemicals ● Water and air tight ● Suitable for use in a wide range of working temperatures End caps are airtight caps used to keep debris out of the end of the micro duct when pulling duct through existing conduit and plowed holes, sealing the end of the conduit temporarily. The end cap is a clear cap that installs much like the couplers providing an airtight seal.                            

CategoryMicroduct Connectors
Send Inquiry Product Details

MICRODUCT CONNECTORS

Microduct end cap for high-pressure temporary duct sealing

This microduct end cap is presented for keeping debris out while microduct is pulled through existing conduit or plowed holes.

The source lists FPF3-FPF20 sizes, push-fit installation, transparent body, water and air tightness, 0-1.6 MPa operating pressure, IP68 and EN 50411-2-8 statements. Confirm the selected code and current evidence.

TECHNICAL DETAILS

Published product facts

Item Published information
Product type Transparent push-fit microduct end cap
Published size coverage FPF3, FPF4, FPF5, FPF6, FPF7, FPF8, FPF10, FPF12, FPF14, FPF16, FPF18 and FPF20 (up to 20 mm nominal)
Tube materials HDPE, PE, nylon and polyurethane
Supplier-stated performance 0-1.6 MPa operating pressure, 2.5 MPa proof pressure, 400 N pull and 0.15-0.8 MPa air tightness
Protection / standard statements IP68, UV-resistant grade F1 and EN 50411-2-8 stated

PRODUCT DETAIL IMAGES

Product Detail

The original product detail images are retained for visual reference. Confirm the quoted model, dimensions and test requirements before ordering.

Microduct End Cap for High-Pressure Temporary Duct Sealing detail 1
Microduct End Cap for High-Pressure Temporary Duct Sealing detail 2
Microduct End Cap for High-Pressure Temporary Duct Sealing detail 3
Microduct End Cap for High-Pressure Temporary Duct Sealing detail 4
Microduct End Cap for High-Pressure Temporary Duct Sealing detail 5
Microduct End Cap for High-Pressure Temporary Duct Sealing detail 6
Microduct End Cap for High-Pressure Temporary Duct Sealing detail 7
Microduct End Cap for High-Pressure Temporary Duct Sealing detail 8
Microduct End Cap for High-Pressure Temporary Duct Sealing detail 9
Microduct End Cap for High-Pressure Temporary Duct Sealing detail 10
Microduct End Cap for High-Pressure Temporary Duct Sealing detail 11

SELECTION GUIDE

Selecting an FPF end cap for duct pulling

Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.

  1. Measure the tubeProvide OD/ID and material for the microduct.
  2. Choose the FPF codeMatch the measured tube to the published FPF size list.
  3. Define the temporary dutyState pulling, plowing, cable-blowing, moisture and debris exposure.
  4. Confirm the evidenceRequest current pressure, leak, pull and standard documents plus packing.

OEM & PROJECT CAPABILITY

Company capability for telecom supply

Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.

Explore company capabilities

Quality inspection for Oulu microduct connector supply
Warehouse packing for Oulu microduct connector orders

B2B SOURCING SUPPORT

B2B purchasing support

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:

  • Provide OD/ID and material for the microduct.
  • Target quantity, model or size mix, sample needs and packing preference.
  • Drawings, route conditions, pressure or sealing tests and compliance documents.
  • Current MOQ, price, freight, sample timing and production timing to be confirmed in the quotation.

Company-level support and commercial terms should be reconfirmed for the selected product and order.

Share dimensions, route conditions and quantities for a product-specific quotation.Send product requirements

PROJECT SUPPORT

Plan the right microduct solution

Review the microduct route solutions and Service pages for project context, then confirm exact fit, documents and commercial terms in the quotation.

Discuss your project

FAQ

Frequently asked questions

What is this microduct end cap used for?

It temporarily seals a microduct end to keep debris out while the duct is pulled through existing conduit or plowed holes.

What FPF sizes are published?

The source lists FPF3 through FPF20, including 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 18 and 20 mm nominal sizes.

Is the cap airtight and watertight?

The supplier states water and air tightness and lists an air-tightness range. Confirm the test method for the selected code.

What pressure is published?

The page states 0-1.6 MPa operating pressure and 2.5 MPa proof pressure, subject to confirmation for the selected model.

Can it be used for air-blown fiber?

The source describes cable-installation and blowing contexts. Confirm the temperature, pressure and tube fit before blowing.

What should an FPF quotation request include?

Provide tube OD/ID and material, FPF size, route duty, pressure and leak tests, quantity, packing and documents.

EXPLORE MORE

Related Products

  • Micro duct connector coupler End cap zinc alloy gallery image 1

    Micro duct connector coupler End cap zinc alloy

    Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: The microduct connector end cap made of zinc alloy provides a durable and secure seal for microduct connections. Its sturdy construction ensures reliable protection and efficiency for your network infrastructure.    ...

    View Details Inquiry
  • HDPE Microduct Bundles Y-Closure gallery image 1

    HDPE Microduct Bundles Y-Closure

    Microduct Type Y splice boxes are essential components in fiber optic networks, particularly in blown fiber installations. Their primary function is to provide protection and organization for fiber splices, ensuring the integrity and reliability of the network.

    View Details Inquiry
  • Microduct Gas-block Connector gallery image 1

    Microduct Gas-block Connector

    Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Description: Micro-duct connector providing gas tight seal connection around the cable inside. When opened, cable can be blown through this connector And sealed afterwards by rotating ring. They operate safely at blowing...

    View Details Inquiry

NEED ASSISTANCE?

Get support for your product requirements

Project InquiryShare your application requirements and preferred configuration. Technical SupportReview installation guidance and service support options. Contact SalesTalk with our sales team about products and lead times.