Microduct Connectors
Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: DESCRIPTION: Microduct Straight connectors, which guarantee a good performance. Transparent body allows verification of the micro-ducts position inside. Safety clips,tamper evident, are pre-installed. Tested & comply with EN 50411-2-8. MAIN FEATURES: ① Safety clips included ② Push-ft technology ③ Working Pressure: max. 25 bars
MICRODUCT CONNECTORS
This microduct straight connector family is presented for joining compatible microducts used in telecom and FTTH cable routes.
The source lists a transparent body, pre-installed tamper-evident safety clips, push-fit assembly, IP68 protection and multiple FPU size codes. The published pressure, pull-test and temperature values remain supplier-stated; confirm the selected code and project test conditions before ordering.
TECHNICAL DETAILS
|
|
Componants | ||||
| 1 | Collet | POM | ||||
| 2 | Locking Clip | POM | ||||
| 3 | Cartridge | POM | ||||
| 4 | Lock Claw | SUS301/304 | ||||
| 5 | Support Ring | POM | ||||
| 6 | Seal Ring | TEP | ||||
| 7 | Body | PC2807 | ||||
| Fit Tube | ||||||
| Pipe material | HDPE、PE、Nylon、Polyurethane | |||||
| Outer diameter of pipe | Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ16,Φ18,Φ20 | |||||
| Technical Parameter | ||||||
| Working with fluids | Air | |||||
| Tightness | 0.15~0.8MPa No Leak | |||||
| Pull test | 400N | |||||
| Proof pressure | 2.5MPa | |||||
| Operating pressure range | 0~1.6MPa | |||||
| Ambient temperature and fluid temperature | -40~60℃ | |||||
| Installation Temperature | -10℃/+50℃ | |||||
| Recommended Blowing Temperature | -15℃/+35℃ | |||||
| Degree of protection | IP68 | |||||
| UV-resistant grade | F1 | |||||
| Insertion force | 50N max(5kg) | |||||
| Lifespan: | 25 years | |||||
| StAndards: | EN 50411-2-8 | |||||
| Specifications And Dimensions | ||||||
| ANMASPC Code | Pipe OD/ID | Pipe OD/ID | Tapered hole | |||
| FPU3/2.1 | 3/2.1 | 3/2.1 | 2.1 | |||
| FPU4/2.5 | 4/2.5 | 4/2.5 | 2.5 | |||
| FPU4/2.8 | 4/2.8 | 4/2.8 | 2.8 | |||
| FPU5/2.1 | 5/2.1 | 5/2.1 | 2.1 | |||
| FPU5/3.5 | 5/3.5 | 5/3.5 | 3.5 | |||
| FPU6/4 | 6/4 | 6/4 | 4.0 | |||
| FPU7/3.5 | 7/3.5 | 7/3.5 | 3.5 | |||
| FPU7/4 | 7/4 | 7/4 | 4.0 | |||
| FPU7/5.5 | 7/5.5 | 7/5.5 | 5.5 | |||
| FPU8/3.5 | 8/3.5 | 8/3.5 | 3.5 | |||
| FPU8/6 | 8/6 | 8/6 | 6.0 | |||
| FPU10/6 | 10/6 | 10/6 | 6.0 | |||
| FPU10/8 | 10/8 | 10/8 | 8.0 | |||
| FPU12/8 | 12/8 | 12/8 | 8.0 | |||
| FPU12/10 | 12/10 | 12/10 | 10.0 | |||
| FPU14/10 | 14/10 | 14/10 | 10.0 | |||
| FPU14/12 | 14/12 | 14/12 | 12.0 | |||
| FPU16/12 | 16/12 | 14/12 | 12.0 | |||
| FPU16/13 | 16/13 | 14/12 | 12.0 | |||
| FPU16/14 | 16/14 | 14/12 | 12.0 | |||
| FPU18/15 | 18/15 | 14/12 | 12.0 | |||
| FPU20/14 | 20/14 | 14/12 | 12.0 | |||
| FPU20/15 | 20/15 | 14/12 | 12.0 | |||
| FPU20/16 | 20/16 | 14/12 | 12.0 | |||
| Overall Dimensions | ||||||
|
||||||
| Model | A | B | C | D | E | F |
| FPU3 | 28.8 | 5.5 | 8 | 8.3 | 3.2 | 2.1 |
| FPU5 | 36.5 | 8 | 10.7 | 11.6 | 5.2 | 2-3.5 |
| FPU7 | 38.8 | 10.9 | 13.4 | 14.7 | 7.3 | 3.5-4-5.5 |
| FPU9 | 38.8 | 11 | 13.4 | 14.7 | 6.3 | 3.5-6 |
| FPU10 | 43 | 12.9 | 15.6 | 16.5 | 10.3 | 6-8 |
| FPU12 | 47 | 14.7 | 17.5 | 19.1 | 12.4 | 8-10 |
| FPU14 | 49.8 | 16.9 | 20 | 21.1 | 14.5 | 10-12 |
| FPU16 | 55.2 | 19 | 23 | 23.7 | 16.5 | 12-14 |
| FPU18 | 69 | 22.5 | 27.5 | 29 | 18.5 | 14 |
| FPU20 | 83.4 | 25.5 | 32.1 | 33.5 | 20.6 | 14-16-18 |
PRODUCT DETAIL IMAGES
The original product detail images are retained below for visual reference. Confirm the quoted model and dimensions before ordering.
SELECTION GUIDE
Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.
OEM & PROJECT CAPABILITY
Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.
B2B SOURCING SUPPORT
The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:
Company-level support and commercial terms should be reconfirmed for the selected product and order.
FAQ
It joins two compatible microduct sections so a telecom or FTTH cable route can continue through the joint.
The source lists HDPE, PE, nylon and polyurethane. Confirm the exact material pair before selecting a code.
The supplier lists 0–1.6 MPa operating pressure, 2.5 MPa proof pressure and air tightness of 0.15–0.8 MPa. Confirm test method and project limits.
The FPU table includes examples from 3/2.1 to 20/16. Match the measured OD/ID and request the exact code.
The page states IP68 and an ambient/fluid temperature range of –40 to 60 °C. Confirm exposure and current test evidence for the route.
Send both tube dimensions, material, route conditions, test requirements, target quantity, packing and document needs.
EXPLORE MORE
Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Standard transparent end caps, which are used to terminate open ended Tubes to avoid air leakage, water or other material ingress. End caps are preassembled with security clips. ...
Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Micro-duct connector providing gas tight seal connection around the cable inside. When opened, cable can be blown through this connectorand sealed afterwards by rotating ring. They operate safelyat blowing pressure of 10 Bar...
Microduct Type T splice boxes are essential components in fiber optic networks, particularly in blown fiber installations. Their primary function is to provide protection and organization for fiber splices, ensuring the integrity and reliability of the network.
NEED ASSISTANCE?