マイクロダクトコネクタ
マイクロダクトストレートコネクタ
浙江欧鲁自动化设备有限公司 简短说明： 描述：微管直通接头，性能优良。透明管体便于确认微管在内部的位置。预装有防篡改安全夹。经过测试并符合 EN 50411-2-8 标准。 主要特点：① 含安全夹 ② 推入式技术 ③ 工作压力：最大 25 巴
カテゴリマイクロダクトコネクタ
MICRODUCT CONNECTORS
Microduct straight connectors for verified FTTH duct joints
This microduct straight connector family is presented for joining compatible microducts used in telecom and FTTH cable routes.
The source lists a transparent body, pre-installed tamper-evident safety clips, push-fit assembly, IP68 protection and multiple FPU size codes. The published pressure, pull-test and temperature values remain supplier-stated; confirm the selected code and project test conditions before ordering.
TECHNICAL DETAILS
Published product facts
| アイテム | Published information |
|---|---|
| Product type | Straight push-fit microduct connector |
| Compatible tube materials | HDPE, PE, nylon and polyurethane |
| Published size examples | FPU3/2.1 through FPU20/16; select by actual tube OD/ID |
| Supplier-stated performance | Air tightness 0.15â0.8 MPa, 400 N pull test, 2.5 MPa proof pressure and 0â1.6 MPa operating range |
| Environment / protection | â40 to 60 °C ambient and fluid temperature; IP68; UV-resistant grade F1; 25-year lifespan stated |
PRODUCT DETAIL IMAGES
Product Detail
The original product detail images are retained below for visual reference. Confirm the quoted model and dimensions before ordering.
SELECTION GUIDE
How to select a microduct straight connector size
Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.
-
Measure both tubesSend the outside and inside diameter of each tube and confirm the material.
-
Match the FPU codeUse the published FPU table as a starting point, then request the exact code and tapered-hole dimensions.
-
Set the installation boundaryState pressure, leak, pull, cable-blowing and temperature test requirements.
-
Confirm documentsRequest the model drawing, current EN 50411-2-8 evidence, packing and quotation terms.
OEM & PROJECT CAPABILITY
Company capability for telecom supply
Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.
B2B SOURCING SUPPORT
B2B purchasing support
The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:
- Send the outside and inside diameter of each tube and confirm the material.
- Target quantity, model or size mix, sample needs and packing preference.
- Drawings, route conditions, pressure or sealing tests and compliance documents.
- Current MOQ, price, freight, sample timing and production timing to be confirmed in the quotation.
Company-level support and commercial terms should be reconfirmed for the selected product and order.
Share dimensions, route conditions and quantities for a product-specific quotation.Send product requirements
よくある質問
よくある質問
What is a microduct straight connector used for?
It joins two compatible microduct sections so a telecom or FTTH cable route can continue through the joint.
Which tube materials are listed?
The source lists HDPE, PE, nylon and polyurethane. Confirm the exact material pair before selecting a code.
What pressure rating is published?
The supplier lists 0â1.6 MPa operating pressure, 2.5 MPa proof pressure and air tightness of 0.15â0.8 MPa. Confirm test method and project limits.
What sizes are available?
The FPU table includes examples from 3/2.1 to 20/16. Match the measured OD/ID and request the exact code.
Is the connector suitable for outdoor routes?
The page states IP68 and an ambient/fluid temperature range of â40 to 60 °C. Confirm exposure and current test evidence for the route.
What should be included in a quotation request?
Send both tube dimensions, material, route conditions, test requirements, target quantity, packing and document needs.
もっと見る
関連商品
-
HDPEマイクロダクトバンドルY型クロージャー
マイクロダクトタイプYスプライスボックスは、光ファイバーネットワーク、特にブローイングファイバー（気送式ファイバー）の設置において不可欠な構成要素です。その主な機能は、ファイバースプライス（接続部）に保護と整理を提供し、ネットワークの完全性と信頼性を確保することです。.
-
-
HDPEストレート継手
浙江欧路自动设备有限公司 概要： 説明： マイクロダクト用ストレートコネクターは、優れた性能を保証します。透明な本体により、マイクロダクト内部の位置を確認できます。脱落防止および不正開封防止のための安全クリップが事前に取り付けられています。EN 50411-2-8のテスト済みで、それに準拠しています。 主な特徴： ①...