Tubo HDPE 19 vie 7/3.5mm PE1.2mm immagine galleria 1

Microtubods in HDPE

Tubo in HDPE 19 vie 7/3.5 mm PE 1.2 mm

Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number:19ways 7/3.5mm DB Tube Bundle Type:Micro Duct & Tube Bundle Place of Origin:Wenzhou, China Brand Name:ANMASPC Use:FTTH Warranty Time:12months Network:None Sub duct Inner diameter:3.5mm Sub duct outer diameter:7mm PE Sheath:1.2mm Outer Diameter::44.4mm (±1.2mm) Melt flow index:0.1 ~ 0.4 g/10 minutes Density:Min. 0.940 g/cm3 Tensile strength at yield:Min. 20MPa Elongation at the break:Min 350% Environmental stress crack resist (F50):Min. 96 hours Kink:≤140mm Supply Ability：1000000 Meter/Meters per Week FOB Price: US $0.5 - 9,999 / Piece Min.Order Quantity: 100 Piece/Pieces Supply Ability: 10000 Piece/Pieces per Month

CategoriaMicrotubods in HDPE
Invia richiesta Dettagli del prodotto

Dettagli del prodotto

Breve descrizione:

Essential details
Model Number:19ways 7/3.5mm DB Tube Bundle
Type:Micro Duct & Tube Bundle
Place of Origin:Wenzhou, China
Brand Name:ANMASPC
Use:FTTH
Warranty Time:12months
Network:None
Sub duct Inner diameter:3.5mm
Sub duct outer diameter:7mm
PE Sheath:1.2mm
Outer Diameter::44.4mm (±1.2mm)
Melt flow index:0.1 ~ 0.4 g/10 minutes
Density:Min. 0.940 g/cm3
Tensile strength at yield:Min. 20MPa
Elongation at the break:Min 350%
Environmental stress crack resist (F50):Min. 96 hours
Kink:≤140mm
Supply Ability：1000000 Meter/Meters per Week
  • FOB Price: US $0.5 – 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
    • HDPE Pipe 19ways 7/3.5mm PE1.2mm detail image 1

    19 WAYS

    Physical and Mechanical Properties – Inner Micro duct 7/3.5mm
    1
    Visual appearance
    Visual inspection
    Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness.
    2
    Outer diameter
    		 ANMASPC
    7.0mm ± 0.1mm
    3
    Wall thickness
    		 ANMASPC
    1.50mm ± 0.10mm
    4
    Inner diameter clearance
    Blowing steel ball
    A 3.0mm steel ball can be blown freely through the duct.
    5
    Ovality
    		 ANMASPC
    ≤ 5%
    6
    Pressurization
    5 minutes @16bar each duct
    No damage and leakage
    7
    Kink
    IEC 60794-1-2 Method E10
    ≤ 70mm
    8
    Tensile strength
    Rate of extension:
    100mm/min
    ≥ 470N
    9
    Crush
    Sample length: 250mm
    Load: 1650N
    Duration of Max. load: 1 min
    Recovery time: 1 hour
    No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
    10
    Impact
    IEC 60794-1-2 Method E4
    1.0 J Impact, recovery time 1 hour
    No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
    11
    Heat reversion
    110℃ ～ 23℃, 1 hour
    ≤ 3%
    12
    Min. bend radius
    84mm
    No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
    13
    Co-efficient of Friction
    750mm Diameter, 450°loop, 5kg mass
    ≤ 0.1
    14
    Color and printing
    Visual inspection
    As per customer specification
    Pos.
    Item
    Specification
    1
    Appearance
    Smooth outer wall (UV-stabilized) without visible impurities; well-proportioned color, no bubbles or cracks; with defined markings
    on outer wall.
    2
    Tensile strength
    Use Pull socks to tension a sample in accordance with table below:
    Sample length: 1m
    Tensile speed: 20mm/min
    Load: 9000N
    Duration of the tension: 5 min.
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
    3
    Crush Resistance
    A 250mm sample after 1 minute load time and 1 hour recovery time. Load (plate) shall be 2500N. The imprint of the plate on the
    sheath is not considered as mechanical damage.
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
    4
    Impact
    Striking surface radius shall be 10mm and impact energy 10J. Recovery time shall be one out. The imprint of the striking surface
    on the microduct is not considered as mechanical damage.
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
    5
    Bend
    Diameter of mandrel shall be 40X OD of sample, 4 turns, 3 cycles.
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
    Completed packages of the HDPE Tube Bundle on drums can be stored outdoor max. 6 months upon the date of production. Storage temperature: -40°C ～ +70°C Installation temperature: -30°C ～ +50°C Operating temperature: -40°C ～ +70°C
    Essential details
    Model Number:19ways 7/3.5mm DB Tube Bundle
    Type:Micro Duct & Tube Bundle
    Place of Origin:Wenzhou, China
    Brand Name:ANMASPC
    Use:FTTH
    Warranty Time:12months
    Network:None
    Sub duct Inner diameter:3.5mm
    Sub duct outer diameter:7mm
    PE Sheath:1.2mm
    Outer Diameter::44.4mm (±1.2mm)
    Melt flow index:0.1 ~ 0.4 g/10 minutes
    Density:Min. 0.940 g/cm3
    Tensile strength at yield:Min. 20MPa
    Elongation at the break:Min 350%
    Environmental stress crack resist (F50):Min. 96 hours
    Kink:≤140mm
    Supply Ability：1000000 Meter/Meters per Week

    Tubo HDPE 19 vie 7/3.5mm PE1.2mm immagine galleria 1

    HDPE Pipe 19ways 7/3.5mm PE1.2mm gallery image 2

    HDPE Pipe 19ways 7/3.5mm PE1.2mm gallery image 3

    HDPE Pipe 19ways 7/3.5mm PE1.2mm gallery image 4

    HDPE Pipe 19ways 7/3.5mm PE1.2mm gallery image 5

    HDPE Pipe 19ways 7/3.5mm PE1.2mm gallery image 6

    HDPE Pipe 19ways 7/3.5mm PE1.2mm gallery image 7

    HDPE Pipe 19ways 7/3.5mm PE1.2mm gallery image 8

    HDPE Pipe 19ways 7/3.5mm PE1.2mm gallery image 9

    HDPE Pipe 19ways 7/3.5mm PE1.2mm gallery image 10

    HDPE Pipe 19ways 7/3.5mm PE1.2mm gallery image 11

    SCOPRI DI PIÙ

    Prodotti correlati

    • TUBO IN HDPE a 3 vie 12/10 mm galleria immagine 1

      TALLO IN HDPE 3 vie 12/10mm

      Zhejiang Oulu Automatic Equipment Co., Ltd. Breve descrizione: Dettagli essenziali Numero di modello: Fascio di tubi DB a 4 vie Tipo: Microcondotto e fascio di tubi Luogo di origine: Wenzhou, Cina Marchio: ANMASPC Utilizzo: FTTH Tempo di garanzia: 12 mesi Rete: Nessuna Diametro interno del sotto-condotto: 10 mm Diametro esterno del sotto-condotto: 12 mm Spessore: 3,4 mm...

      Visualizza dettagli Richiesta
    • 7 modi 12/10 mm Tubo in HDPE DB immagine della galleria 1

      7 Modi Tubo in HDPE DB da 12/10 mm

      Zhejiang Oulu Automatic Equipment Co., Ltd. Breve descrizione: Dettagli essenziali Numero di modello: Fascio di tubi DB a 7 vie 12/10 mm Tipo: Fascio di tubi Luogo di origine: Shanghai, Cina Marchio: ANMASPC Utilizzo: FTTH Tempo di garanzia: 12 mesi Rete: Nessuna Diametro interno del sotto-tubo: 10 mm Diametro esterno del sotto-tubo: 12 mm Guaina in PE: 3,4 mm Esterno...

      Visualizza dettagli Richiesta
    • Immagine 1 della galleria del micrototto in HDPE da 7 vie 12/8 mm

      Microdotto in HDPE a 7 vie 12/8 mm

      Zhejiang Oulu Automatic Equipment Co., Ltd. Breve descrizione: Dettagli essenziali Numero di modello: Fascio di tubi DB 7 vie 12/8 mm Tipo: Microcondotto e fascio di tubi Luogo di origine: Wenzhou, Cina Marchio: ANMASPC Utilizzo: FTTH, Installazione di cavi Tempo di garanzia: 12 mesi Rete: Nessuna Diametro interno del sotto-condotto: 8 mm Sotto-condotto esterno...

      Visualizza dettagli Richiesta

    SERVE AIUTO?

    Ricevi supporto per i requisiti del tuo prodotto

    Richiesta di informazioni sul progettoCondividi i requisiti della tua applicazione e la configurazione preferita. Supporto TecnicoEsaminare le indicazioni per l'installazione e le opzioni di assistenza. Contatta l'ufficio venditeParla con il nostro team di vendita riguardo ai prodotti e ai tempi di consegna.