End Stop Connectors: Selection and Installation Guide product and installation reference

HDPE mikrokanali

HDPE 3-putni 12/10 mm DB cijev

Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number: 4 ways DB Tube Bundle Type:Micro Duct & Tube Bundle Place of Origin:Wenzhou, China Brand Name:ANMASPC Use:FTTH Warranty Time:12months Network:None Sub duct Inner diameter:10mm Sub duct outer diameter:12mm Thickness:3.4mm Outer Diameter::32.4mm (± 1.1mm) Melt flow index:≤ 0.40 g/10min Density:0.940~0.958 g/cm3 Tensile strength:≥ 4600N Environmental stress crack resist (F50):Min. 96 hours Storage temperature:-40°C ~ +70°C Installation temperature:-30°C ~ +50°C

KategorijaHDPE mikrokanali

Pošalji upit Detalji o proizvodu

MICRODUCT CONNECTORS

3-way 12/10 mm direct-buried HDPE microduct tube bundle

This 3-way DB HDPE microduct bundle is presented for FTTH and underground air-blown cable installation.

The snapshot contains a naming conflict between the title and one essential-details line, while the technical table identifies a 3-way 12/10 mm bundle. The table states 12 mm OD, 10 mm ID, 3.4 mm sheath, 16 bar pressurization, at least 620 N inner tensile and 4,600 N bundle tensile; confirm the current model label and drawing.

TECHNICAL DETAILS

Published product facts

Physical and Mechanical Properties – Inner Micro duct 12/10mm
1	Vizuelni izgled	Vizuelni pregled	Unutrašnja površina rebrasta, a vanjska glatka, bez mjehurića, uvlačenja, ljuštenja, ogrebotina i hrapavosti.
2	Vanjski promjer	ANMASPC	12.0mm ± 0.1mm
3	Debljina zida	ANMASPC	1.00mm ± 0.10mm
4	Slobodan unutrašnji promjer	Duhanje čelične kugle	Čelična kugla promjera 8,5 mm može se slobodno provući kroz kanal.
5	Ovalnost	ANMASPC	≤ 5%
6	Pritiskanje	5 minutes @ 16bar each duct	Nema oštećenja i curenja
7	Perverzija	IEC 60794-1-2 Metoda E10	≤ 120mm
8	Čvrstoća na vuču	Stopa proširenja: 100 mm/min	≥ 620N
9	Smrskaj	Dužina uzorka: 250 mm Load: 380N Trajanje maksimalnog opterećenja: 1 min Vrijeme oporavka: 1 sat	Nema preostale deformacije unutrašnjeg i vanjskog prečnika veće od 15%; mora proći test tolerancije unutrašnjeg prečnika.
10	Uticaj	IEC 60794-1-2 Metoda E4 1.0J Impact, recovery time 1 hour	Nema preostale deformacije unutrašnjeg i vanjskog prečnika veće od 15%; mora proći test tolerancije unutrašnjeg prečnika.
11	Povrat toplote	110℃ ～ 23℃, 1 hour	≤ 3%
12	Min. radijus savijanja	144mm	Nema preostale deformacije unutrašnjeg i vanjskog prečnika veće od 15%; mora proći test tolerancije unutrašnjeg prečnika.
13	Koeficijent trenja	750mm Diameter, 450°loop, 5kg mass	≤ 0.1
14	Boja i štampa	Vizuelni pregled	Prema specifikaciji kupca

Test	Karakterističan	Metoda ispitivanja	Kriteriji prihvatanja
Physical and Mechanical Properties – tube bundles
1	Vizuelni izgled	Vizuelni pregled, Vanjski omotač: Crni	Unutrašnja površina rebrasta, a vanjska glatka, bez mjehurića, uvlačenja, ljuštenja, ogrebotina i hrapavosti.
2	Vanjski promjer	ANMASPC	35.8mm (± 1.1mm)
3	Debljina stijenke navlake	ANMASPC	3.40mm ± 0.20mm
4	Pritiskanje	5 minuta @16 bar svakom kanalu	Nema oštećenja i curenja
5	Čvrstoća na vuču	Stopa proširenja: 100 mm/min	≥ 4600N
6	Smrskaj	Dužina uzorka: 250 mm Opterećenje: 2000N Trajanje maksimalnog opterećenja: 1 min Vrijeme oporavka: 1 sat	Nema preostale deformacije unutrašnjeg i vanjskog prečnika veće od 15%; mora proći test tolerancije unutrašnjeg prečnika.
7	Uticaj	IEC 60794-1-2 Metoda E4 10.0J Impact, recovery time 1 hour	Nema preostale deformacije unutrašnjeg i vanjskog prečnika veće od 15%; mora proći test tolerancije unutrašnjeg prečnika.
8	Min. radijus savijanja	720mm	Nema preostale deformacije unutrašnjeg i vanjskog prečnika veće od 15%; mora proći test tolerancije unutrašnjeg prečnika.
9	Boja i štampa	Vizuelni pregled	Prema specifikaciji kupca

PRODUCT DETAIL IMAGES

Product Detail

The original product detail images are retained for visual reference. Confirm the quoted model, dimensions and test requirements before ordering.

3-Way 12/10 mm Direct-Buried HDPE Microduct Tube Bundle detail 1

3-Way 12/10 mm Direct-Buried HDPE Microduct Tube Bundle detail 2

3-Way 12/10 mm Direct-Buried HDPE Microduct Tube Bundle detail 3

3-Way 12/10 mm Direct-Buried HDPE Microduct Tube Bundle detail 4

3-Way 12/10 mm Direct-Buried HDPE Microduct Tube Bundle detail 5

3-Way 12/10 mm Direct-Buried HDPE Microduct Tube Bundle detail 6

3-Way 12/10 mm Direct-Buried HDPE Microduct Tube Bundle detail 7

3-Way 12/10 mm Direct-Buried HDPE Microduct Tube Bundle detail 8

3-Way 12/10 mm Direct-Buried HDPE Microduct Tube Bundle detail 9

3-Way 12/10 mm Direct-Buried HDPE Microduct Tube Bundle detail 10

3-Way 12/10 mm Direct-Buried HDPE Microduct Tube Bundle detail 11

3-Way 12/10 mm Direct-Buried HDPE Microduct Tube Bundle detail 12

SELECTION GUIDE

Selecting a 3-way 12/10 mm DB microduct bundle

Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.

Confirm the way countUse the technical table and project drawing to resolve the title versus essential-details naming conflict.
Check cable clearanceConfirm 12/10 mm dimensions and the 8.5 mm blowing-ball clearance stated in the table.
Plan the buried routeUse the bundle OD, sheath and bend limits from the confirmed drawing.
Request batch evidenceConfirm pressure, tensile, crush, impact, color, drum packing and quantity documents.

OEM & PROJECT CAPABILITY

Company capability for telecom supply

Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.

Explore company capabilities

Quality inspection for Oulu microduct connector supply

Warehouse packing for Oulu microduct connector orders

B2B SOURCING SUPPORT

B2B purchasing support

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:

Use the technical table and project drawing to resolve the title versus essential-details naming conflict.
Target quantity, model or size mix, sample needs and packing preference.
Drawings, route conditions, pressure or sealing tests and compliance documents.
Current MOQ, price, freight, sample timing and production timing to be confirmed in the quotation.

Company-level support and commercial terms should be reconfirmed for the selected product and order.

Share dimensions, route conditions and quantities for a product-specific quotation.Send product requirements

Često postavljana pitanja

What is a 3-way 12/10 mm bundle used for?

It provides HDPE pathways for underground FTTH and air-blown fiber routes.

What are the inner dimensions?

The technical table states 12 mm outside diameter and 10 mm inside diameter.

How many ways does the product have?

The technical table identifies 3 ways, while one essential-details line says 4 ways. Confirm the exact model before ordering.

What tensile value is stated?

The table states at least 620 N inner tensile and at least 4,600 N bundle tensile. Confirm the current batch report.

What temperatures are listed?

Storage and operation are stated as -40 to 70 C, with installation from -30 to 50 C.

What should a bundle enquiry include?

Provide way count, OD/ID, route and burial conditions, bend limits, drum packing, quantity and current test documents.

Istražite više

Povezani proizvodi

4ways HDPE mikrokanalni cjevni snop

Zhejiang Oulu Automatic Equipment Co., Ltd. Kratki opis: Broj modela: 4ways DB Tube Bundle Tip: mikro kanal i paket cijevi Mjesto porijekla: Wenzhou, Kina Naziv marke: ANMASPC Otporan na starenje i hemijsku koroziju. HDPE paket cijevi je praktičan za montažu, štedi vrijeme...

Prikaži detalje Upit
24 načina 5/3,5 mm HDPE mikro-kanalna cijev

Zhejiang Oulu Automatic Equipment Co., Ltd. Kratki opis: Osnovni detalji Broj modela: 24ways 5/3.5mm Tip DB cijevnog snopa: mikro kanal i cijevni snop Mjesto porijekla: Wenzhou, Kina Naziv marke: ANMASPC Namjena: FTTH Garancija: 12 mjeseci Mreža: Nema Boja: po narudžbi Materijal: HDPE Funkcija:Instalacija kabla Unutrašnji promjer:3,5 mm Vanjski promjer:5 mm Oblik:Okrugli...

Prikaži detalje Upit
HDPE cijevni spoj 20-110 mm

Zhejiang Oulu Automatic Equipment Co., Ltd. Kratki opis: Naziv: HDPE kompresioni spoj Veličina: 20–110 mm Mjesto porijekla: Zhejiang, Kina Boja: crna, plava, po narudžbi Primjena: za sustav navodnjavanja Pritisak: PN16 Certifikat: ISO9001, ISO14001, CE standard:Međunarodni standard. Postoje brojne prednosti upotrebe HDPE kompresionih spojki u vašim cjevovodnim sistemima....

Prikaži detalje Upit

Trebate pomoć?

Obezbijedite podršku za vaše zahtjeve za proizvodom.

Upit o projektuPodijelite zahtjeve vaše aplikacije i željenu konfiguraciju. Tehnička podrškaPregledajte upute za instalaciju i opcije servisne podrške. Kontaktirajte prodajuRazgovarajte s našim prodajnim timom o proizvodima i rokovima isporuke.