Full-size microduct endcap range for telecom procurement

This microduct endcap family is presented for terminating open-ended telecom tubes and helping limit air leakage, water and material ingress.

Supplier data lists transparent push-fit bodies, preassembled safety clips, a maximum working pressure of 25 bar and FPF sizes from 3–20 mm outside diameter.

Key details

							Bileşenler
							1	Kovan (Pens)		POM
							2	Emniyet Klipsi		POM
							3	Kartuş		ÇİNKO ALAŞIMI
							4	Kilit Pençesi		SUS301/304
							5	Destek Halkası		POM
							6	Mühür Yüzüğü		TEP
							7	Gövde		PC2807
Fit Tüpü
Boru malzemesi						HDPE、PE、Nylon、Polyurethane
Borunun dış çapı						Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ16,Φ18,Φ20
Technical Parameter
Akışkanlarla çalışmak						Hava
Gerginlik						0.15~0.8MPa Sızıntı Yok
Çekme testi						400N
Test basıncı						2.5 MPa
Çalışma basıncı aralığı						0~1.6MPa
Ortam sıcaklığı ve akışkan sıcaklığı						-40~60℃
Montaj Sıcaklığı						-10℃/+50℃
Önerilen Üfleme Sıcaklığı						-15℃/+35℃
Koruma derecesi						IP68
UV ışınlarına dayanıklı sınıf						F1
Yerleştirme kuvveti						Maksimum 50N (5kg)
Ömür						25 yıl
Standartlar:						EN 50411-2-8
Teknik Özellikler ve Boyutlar
ANMASPC Kodu						Dış Çap/İç Çap
FPF3						3
FPF4						4
FPF5						5
FPF6						6
FPF7						7
FPF8						8
FPF10						10
FPF12						12
FPF14						14
FPF16						16
FPF18						18
FPF20						20

Building a multi-size microduct endcap order

Use these checkpoints to prepare a product-specific enquiry and avoid selecting by a general trade name alone.

1. List every tube size: Provide measured outside diameters and required quantities by FPF code rather than asking for an unspecified mixed range.
2. Separate route conditions: Identify any sizes used in different chambers, routes or pressure conditions.
3. Confirm fit and test data: Request dimensional drawings and applicable sealing or pressure information for the selected versions.
4. Confirm commercial terms: Ask for current MOQ, mixed-size packing, sample availability, lead time and export documents in the quotation.

OEM ve proje yeteneği

Telekom tedariki konusunda şirket yeteneği

Oulu Automatic Equipment, telekom sağlayıcıları, distribütörler ve OEM ortakları için mikroboru bağlantı parçaları, HDPE mikroboru sistemleri, kablo üfleme aksesuarları ve pnömatik bağlantı parçaları tedarikçisi olarak kendini tanıtıyor.

Şirketin yeteneklerini keşfedin

B2B kaynak bulma desteği

B2B satın alma desteği

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. For a product-specific enquiry, include:

• Provide measured outside diameters and required quantities by FPF code rather than asking for an unspecified mixed range.
• Target quantity by size or model, sample needs, mixed specifications and packing preference.
• Project drawings, pressure or sealing requirements, and required compliance or export documents.
• Current MOQ, payment, freight, sample timing and production timing to be confirmed in the quotation.

Company-level service statements and commercial terms should be reconfirmed for the selected product and order.

Bir ürün bazlı teklif için boyutları, rota koşullarını ve miktarları paylaşın.
Ürün gereksinimlerinizi gönderin

ÜRÜN DETAY GÖRÜNTÜLERİ

Ürün Detayı

SSS

What is a microduct endcap used for?

It closes an open-ended telecom tube and is described as helping limit air leakage and water or material ingress.

What are the standard sizes of microducts?

Network sizes vary. This endcap family publishes FPF3–FPF20 versions for 3–20 mm outside diameter.

Can I order multiple microduct endcap sizes together?

Mixed-size supply may be discussed, but current MOQ, packing and commercial terms should be confirmed in the quotation.

How do I select an FPF endcap code?

Match the measured tube outside diameter to the published FPF size and request the dimensional drawing for final confirmation.

What pressure can the transparent endcap handle?

The supplier publishes a maximum working pressure of 25 bar. Confirm the test method and actual project condition before use.

What details are needed for a wholesale microduct endcap enquiry?

Provide quantities by size, tube material, application, sealing requirement, packing preference, destination and document needs.