Zhejiang Oulu Automatic Equipment Co., Ltd. Kısa Açıklama: Açıklama: Mikro kanal düz konnektörü, mikro kanalları birbirine bağlamak için geliştirilmiştir. Sistemimiz, mikro kanalın kolay ve hızlı bir şekilde bağlanmasını ve bağlantısının kesilmesini sağlar. Düz mikro kanal konnektörünün sağlam yapısı, yüksek basınç kuvvetlerine karşı direnç göstererek doğrudan gömme (DB) uygulamalarında kullanılmalarına olanak tanır. Ana özellikler: ①Standart EN50411-2-8. ②Yüksek basınç dayanımı >25 bar. ③Yüksek sıcaklık dayanımı -40~65℃. ④Doğrudan gömme ortamlarda kalın duvarlı mikro kanalları bağlamak için tasarlanmıştır. ⑤Kurulumdan sonra kilidi açılamayan kalıcı bağlantı. Kullanımı kolay, sağlam ve yüksek mekanik direnç. ⑥ Ambalaj: poşet
Straight bury microduct connector for direct-buried duct routes
This straight bury microduct connector is presented for connecting thick-walled microducts in direct-buried (DB) applications.
The supplier states resistance above 25 bar, temperature resistance from –40 to 65°C, EN 50411-2-8 alignment and a permanent connection that cannot be unlocked after installation. Confirm the exact DB code and current test documents before ordering.
TECHNICAL DETAILS
Published product facts
Bileşenler
Gövde
polikarbonat
Çamaşır makinesi
Poliasetal
Yaka
Poliasetal
Mühür
Naber
Kilit Pençeleri
SS301/304
Kol
Poliasetal
Fit Tüpü
Boru malzemesi
HDPE、PE、Nylon、Polyurethane
Borunun dış çapı
Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ16,Φ18,Φ20
Technical Parameter
Akışkanlarla çalışmak
Hava
Gerginlik
0.15~0.8MPa Sızıntı Yok
Çekme testi
400N
Test basıncı
2.5 MPa
Çalışma basıncı aralığı
0~1.6MPa
Ortam sıcaklığı ve akışkan sıcaklığı
-40~60℃
Montaj Sıcaklığı
-10℃/+50℃
Önerilen Üfleme Sıcaklığı
-15℃/+35℃
Koruma derecesi
IP68
UV ışınlarına dayanıklı sınıf
F1
Yerleştirme kuvveti
Maksimum 50N (5kg)
Ömür
25 yıl
Standartlar:
EN 50411-2-8
Teknik Özellikler ve Boyutlar
ANMASPC Kodu
Kanal Dış Çapı (mm)
adet/çanta
BORU boyutu
DB07/3.5
Φ7/3.5
10.0
Φ7
DB08/3.5
Φ8/3.5
10.0
Φ8
DB10/6
Φ10/6
10.0
Φ10
DB12/8
Φ12/8
10.0
Φ12
DB14/10
Φ14/10
10.0
Φ14
PRODUCT DETAIL IMAGES
Product Detail
The original product detail images are retained below for visual reference. Confirm the quoted model and dimensions before ordering.
SELECTION GUIDE
Selecting a direct-buried microduct coupler
Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.
Match the ductProvide the duct outside diameter, inside diameter and wall condition; the source lists thick-walled DB use.
Confirm the routeState direct-buried depth, chamber or entry location and the expected environmental conditions.
Set the test boundaryCompare the supplier-stated above-25-bar resistance and –40 to 65°C range with the project test plan.
Request the codeAsk for the matching DB article code, drawing, current standard evidence, quantity and packing confirmation.
OEM & PROJECT CAPABILITY
Company capability for telecom supply
Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.
The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:
Provide the duct outside diameter, inside diameter and wall condition; the source lists thick-walled DB use.
Target quantity, model or size mix, sample needs and packing preference.
Drawings, route conditions, pressure or sealing tests and compliance documents.
Current MOQ, price, freight, sample timing and production timing to be confirmed in the quotation.
Company-level support and commercial terms should be reconfirmed for the selected product and order.
Share dimensions, route conditions and quantities for a product-specific quotation.Send product requirements
PROJECT SUPPORT
Plan the right microduct solution
Review the microduct route solutions ve Hizmet pages for project context, then confirm exact fit, documents and commercial terms in the quotation.
What is a straight bury microduct connector used for?
It joins thick-walled microducts in a direct-buried telecom route, where the joint must remain in place after installation.
How do I choose a DB microduct coupler size?
Send the measured duct outside and inside diameter and request the matching DB article code, such as the published DB07/3.5 to DB14/10 examples.
What pressure can this direct-buried connector handle?
The supplier states high-pressure resistance above 25 bar. Request the exact test method and confirm the project operating pressure before treating it as a design limit.
What temperature range is published for the connector?
The supplier states temperature resistance from –40 to 65°C. Confirm whether those conditions match the installed route and the required test evidence.
Can the connector be disconnected after installation?
The source describes a permanent connection that cannot be unlocked after installation. Plan the joint location and inspection before fitting.
Does the connector comply with EN 50411-2-8?
The supplier page states EN 50411-2-8. Request the current test or compliance document for the selected DB model if it is required for the project.
Mikrokanal Tipi Y ek kutuları, fiber optik ağlarda, özellikle üflemeli fiber kurulumlarında temel bileşenlerdir. Birincil işlevleri, fiber ekleri için koruma ve düzenleme sağlayarak ağın bütünlüğünü ve güvenilirliğini garanti etmektir.
Zhejiang Oulu Automatic Equipment Co., Ltd. Kısa Açıklama: AÇIKLAMA: Redüksiyon konnektörleri, farklı dış çaplara sahip iki mikro kanalın birbirine bağlanmasını sağlar. Tipik olarak bu durum, eve giren DB'den DI mikro kanala geçiş noktasıdır. Eğer ...madıysanız.
