마이크로 덕트 엔딩 캡

Transparent microduct ending cap for open tube termination

This transparent microduct ending cap is presented for terminating open tubes to help avoid air leakage and the ingress of water or other material.

Supplier data lists a preassembled safety clip, push-fit connection, a maximum working pressure of 25 bar and published FPF sizes from 3–20 mm outside diameter.

Key details

							구성품
							1	콜렛		POM
							2	잠금 클립		POM
							3	카트리지		아연 합금
							4	잠금 클로		SUS301/304
							5	서포트 링		POM
							6	인장 반지		TEP
							7	본체		PC2807
피트 튜브
파이프 재질						HDPE、PE、Nylon、Polyurethane
파이프 외경						Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ16,Φ18,Φ20
Technical Parameter
유체 다루기						공기
조임						0.15~0.8MPa 누설 없음
인장 시험						400N
내압시험 압력						2.5MPa
작동 압력 범위						0~1.6MPa
주위 온도와 유체 온도						-40~60℃
설치 온도						-10℃/+50℃
권장 불어내기 온도						-15℃/+35℃
보호 등급						IP68
자외선 차단 등급						F1
삽입력						50N 최대(5kg)
수명						25년
표준						EN 50411-2-8
사양 및 치수
ANMASPC 코드						외경/내경
FPF3						3
FPF4						4
FPF5						5
FPF6						6
FPF7						7
FPF8						8
FPF10						10
FPF12						12
FPF14						14
FPF16						16
FPF18						18
FPF20						20
전체 치수
모델		A		B		C		D		E
FPF3		14.5		8.3		8		5.5		3.2
FPF5		18.2		11.8		10.7		6.1		5.2
FPF7		19.4		14.8		13.4		11		7.3
FPF8		19.4		14.8		13.4		11		8.3
FPF10		21.5		16.8		15.7		13.2		10.3
FPF12		23.5		19		17.5		15.4		12.4
FPF14		24.9		21.3		19.7		17.4		14.5
FPF16		27.6		24.4		23		20		16.5
FPF18		36.5		29		27.6		22.5		18.5
FPF20		42.5		33.5		30.5		25.6		20.6

Choosing an ending cap for an open microduct

Use these checkpoints to prepare a product-specific enquiry and avoid selecting by a general trade name alone.

1. Measure the open tube: Provide the outside diameter and confirm the matching FPF article code within the published 3–20 mm range.
2. Describe the environment: State whether the cap is for storage, installation, a chamber or another telecom route location.
3. Confirm the pressure need: Compare the published 25 bar maximum with the actual operating or test condition.
4. Plan procurement: Request the exact size, quantity, packing, sample and documentation in one enquiry.

OEM & PROJECT CAPABILITY

Company capability for telecom supply

Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.

Explore company capabilities

B2B SOURCING SUPPORT

B2B purchasing support

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. For a product-specific enquiry, include:

• Provide the outside diameter and confirm the matching FPF article code within the published 3–20 mm range.
• Target quantity by size or model, sample needs, mixed specifications and packing preference.
• Project drawings, pressure or sealing requirements, and required compliance or export documents.
• Current MOQ, payment, freight, sample timing and production timing to be confirmed in the quotation.

Company-level service statements and commercial terms should be reconfirmed for the selected product and order.

Share dimensions, route conditions and quantities for a product-specific quotation.
Send product requirements

PRODUCT DETAIL IMAGES

제품 상세 정보

자주 묻는 질문

What is a microduct used for?

A microduct provides a protected path for a telecom or fiber cable. An ending cap closes the tube while it is open or unused.

What is a microduct ending cap used for?

It terminates an open tube and is described as helping avoid air leakage and the ingress of water or other material.

What are the standard sizes of microducts?

Sizes vary by network. This ending-cap family publishes FPF3–FPF20 versions for 3–20 mm outside diameter.

How is a push-fit microduct end cap installed?

The supplier describes a push-fit cap with a preassembled safety clip. Confirm tube preparation, insertion and removal steps for the selected size.

What pressure rating does the ending cap have?

The supplier publishes a maximum working pressure of 25 bar. Request the applicable test data for the project’s pressure condition.

How do I request the correct FTTH duct end seal?

Send the tube outside diameter, material, route environment, pressure or sealing requirement, quantity and requested documentation.