7 Ways 12/10 mm DB HDPE Tube gallery image 1

HDPE 마이크로덕트

7 Ways 12/10 mm DB HDPE Tube

Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number:7 Ways 12/10mm DB Tube Bundle Type:Tube bundle Place of Origin:Shanghai, China Brand Name:ANMASPC Use:FTTH Warranty Time:12months Network:None Sub duct Inner diameter:10mm Sub duct outer diameter:12mm PE Sheath:3.4mm Outer Diameter::42.8mm (±1.1mm) Melt flow index:0.1 ~ 0.4 g/10 minutes Density:Min. 0.940 g/cm3 Tensile strength at yield:Min. 20MPa Elongation at the break:Min 350% Environmental stress crack resist (F50):Min. 96 hours Storage temperature:-40°C ~ +70°C Supply Ability：1000000 Piece/Pieces per Day       FOB Price: US $0.5 - 9,999 / Piece Min.Order Quantity: 100 Piece/Pieces Supply Ability: 10000 Piece/Pieces per Month

카테고리HDPE 마이크로덕트
문의하기 제품 상세 정보

제품 상세 정보

간단한 설명:

Essential details
Model Number:7 Ways 12/10mm DB Tube Bundle
Type:Tube bundle
Place of Origin:Shanghai, China
ANMASPC
Use:FTTH
Warranty Time:12months
Network:None
Sub duct Inner diameter:10mm
Sub duct outer diameter:12mm
PE Sheath:3.4mm
Outer Diameter::42.8mm (±1.1mm)
Melt flow index:0.1 ~ 0.4 g/10 minutes
Density:Min. 0.940 g/cm3
Tensile strength at yield:Min. 20MPa
Elongation at the break:Min 350%
Environmental stress crack resist (F50):Min. 96 hours
Storage temperature:-40°C ~ +70°C
Supply Ability：1000000 Piece/Pieces per Day
  • FOB 가격: US $0.5 – 9,999 / 개
  • 최소 주문 수량 100개
  • 공급 능력 월 10,000개
    • 7 Ways 12/10 mm DB HDPE Tube detail image 1

    7 WAYS

    A bundle of micro- or mini-tubes (regular wall size) is surrounded by dual HDPE sheath. The design makes the duct assemblies suitable for outdoor direct bury application. The inner micro ducts are optimized for best cable blowing performance.

    Raw materials

    HDPE of a high-molecular type with the following parameters is used for production of the Tube Bundle: – Melt flow index: 0.1 ～ 0.4 g/10 minutes EN ISO 1133 – Density: Min. 0.940 g/cm3 ISO 1183 – Tensile strength at yield: Min. 20MPa ISO 527 – Elongation at the break: Min 350% ISO 527 – Environmental stress crack resist (F50) Min. 96 hours ISO 4599
    Pos.
    Mechanical performance
    Test conditions
    Performance
    Standard
    1
    인장강도
    at yield
    연신율
    100mm/분
    ≥620N
    IEC 60794-1-2
    Method E1
    2
    크러시
    시료 길이: 250mm
    Load: 380N
    Duration of Max. load: 1 minutes
    회복 시간: 1시간
    The outer and inner diameter shall show, under visual examination without damage and no reduction of diameter greater than 15%.
    IEC 60794-1-2
    Method E3
    3
    성적 취향
    ≤120mm
    –
    IEC 60794-1-2
    Method E10
    4
    영향
    Striking surface radius: 10mm
    Impact Energy: 1J
    Number of impact: 3 times
    회복 시간: 1시간
    Under visual examination, there shall be no damage to the micro duct.
    IEC 60794-1-2
    Method E4
    5
    Bend radius
    Number of turns: 5
    Mandrel diameter:144mm.
    Mumber of cycles: 3
    The outer and inner diameter shall show, under visual examination without damage and no reduction of diameter greater than 15%.
    IEC 60794-1-2
    Method E11
    Pos.
    Item
    Specification
    1
    Appearance
    Smooth outer wall (UV-stabilized) without visible impurities; well-proportioned color, no bubbles or cracks; with defined markings
    on outer wall.
    2
    인장강도
    Use Pull socks to tension a sample in accordance with table below:
    Sample length: 1m
    Tensile speed: 20mm/min
    Load: 6800N
    Duration of the tension: 5 min.
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
    3
    Crush Resistance
    A 250mm sample after 1 minute load time and 1 hour recovery time. Load (plate) shall be 2000N. The imprint of the plate on the
    sheath is not considered as mechanical damage.
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
    4
    영향
    Striking surface radius shall be 10mm and impact energy 10J. Recovery time shall be one out. The imprint of the striking surface
    on the microduct is not considered as mechanical damage.
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
    5
    Bend
    Diameter of mandrel shall be 40X OD of sample, 4 turns, 3 cycles.
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
    Completed packages of the HDPE Tube Bundle on drums can be stored outdoor max. 6 months upon the date of production. Storage temperature: -40°C ～ +70°C Installation temperature: -30°C ～ +50°C Operating temperature: -40°C ～ +70°C
    Essential details
    Model Number:7 Ways 12/10mm DB Tube Bundle
    Type:Tube bundle
    Place of Origin:Shanghai, China
    ANMASPC
    Use:FTTH
    Warranty Time:12months
    Network:None
    Sub duct Inner diameter:10mm
    Sub duct outer diameter:12mm
    PE Sheath:3.4mm
    Outer Diameter::42.8mm (±1.1mm)
    Melt flow index:0.1 ~ 0.4 g/10 minutes
    Density:Min. 0.940 g/cm3
    Tensile strength at yield:Min. 20MPa
    Elongation at the break:Min 350%
    Environmental stress crack resist (F50):Min. 96 hours
    Storage temperature:-40°C ~ +70°C
    Supply Ability：1000000 Piece/Pieces per Day

    더 알아보기

    관련 상품

    • HDPE TUBE 3 ways 12/10mm gallery image 1

      HDPE TUBE 3 ways 12/10mm

      Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number: 4 ways DB Tube Bundle Type:Micro Duct & Tube Bundle Place of Origin:Wenzhou, China Brand Name:ANMASPC Use:FTTH Warranty Time:12months Network:None Sub duct Inner diameter:10mm Sub duct outer diameter:12mm Thickness:3.4mm...

      상세 보기 문의
    • 마이크로덕트 튜브 가위 갤러리 이미지 1

      마이크로덕트 튜브 가위

      절강오울루자동설비유한회사 간략 소개:  

      상세 보기 문의
    • HDPE 3 ways 12/10mm DB TUBE gallery image 1

      HDPE 3 ways 12/10mm DB TUBE

      Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number: 4 ways DB Tube Bundle Type:Micro Duct & Tube Bundle Place of Origin:Wenzhou, China Brand Name:ANMASPC Use:FTTH Warranty Time:12months Network:None Sub duct Inner diameter:10mm Sub duct outer diameter:12mm...

      상세 보기 문의

    도움이 필요하신가요?

    제품 요구 사항에 대한 지원을 받으세요

    프로젝트 문의응용 프로그램 요구 사항과 선호하는 구성을 공유해 주세요. 기술 지원설치 지침 및 서비스 지원 옵션을 검토하세요. 영업팀에 문의하기제품 및 리드 타임에 대해 영업 팀과 상담해 보세요.