マイクロダクトストレートコネクタ

TECHNICAL DETAILS

Published product facts

				コンポーネント
				1	コレット	POM
				2	ロッキングクリップ	POM
				3	カートリッジ	POM
				4	ロック・クロウ	SUS301/304
				5	サポートリング	POM
				6	シグネットリング	TEP
				7	本文	PC2807
フィットチューブ
配管材料			HDPE、PE、Nylon、Polyurethane
配管の外径			Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ16,Φ18,Φ20
Technical Parameter
流体の取り扱い			空気
締め付け感			0.15～0.8MPa 漏れなし
引張り試験			400N
耐圧			2.5MPa
使用圧力範囲			0〜1.6MPa
周囲温度と流体温度			-40~60℃
設置温度			-10℃/+50℃
推奨ブロー温度			-15℃/+35℃
保護等級			IP68
耐候性グレード			F1
挿入力			最大50N（5kg）
寿命			25年
基準：			EN 50411-2-8
仕様と寸法
ANMASPCコード	管の外径/内径		管の外径/内径		テーパー穴
FPU3/2.1	3/2.1		3/2.1		2.1
FPU4/2.5	4/2.5		4/2.5		2.5
FPU4/2.8	4/2.8		4/2.8		2.8
FPU5/2.1	5/2.1		5/2.1		2.1
FPU5/3.5	5/3.5		5/3.5		3.5
FPU6/4	6/4		6/4		4.0
FPU 7/3.5	7/3.5		7/3.5		3.5
FPU7/4	7/4		7/4		4.0
FPU7/5.5	7/5.5		7/5.5		5.5
FPU8/3.5	8/3.5		8/3.5		3.5
FPU8/6	8/6		8/6		6.0
FPU10/6	10/6		10/6		6.0
FPU10/8	10/8		10/8		8.0
FPU12/8	12/8		12/8		8.0
FPU12/10	12/10		12/10		10.0
FPU14/10	14/10		14/10		10.0
FPU14/12	14/12		14/12		12.0
FPU16/12	16/12		14/12		12.0
FPU16/13	16/13		14/12		12.0
FPU16/14	16/14		14/12		12.0
FPU18/15	18/15		14/12		12.0
FPU20/14	20/14		14/12		12.0
FPU20/15	20/15		14/12		12.0
FPU20/16	20/16		14/12		12.0
全体寸法
モデル	A	B	C	D	E	F
FPU3	28.8	5.5	8	8.3	3.2	2.1
FPU5	36.5	8	10.7	11.6	5.2	2-3.5
FPU7	38.8	10.9	13.4	14.7	7.3	3.5-4-5.5
FPU9	38.8	11	13.4	14.7	6.3	3.5-6
FPU10	43	12.9	15.6	16.5	10.3	6-8
FPU12	47	14.7	17.5	19.1	12.4	8-10
FPU14	49.8	16.9	20	21.1	14.5	10-12
FPU16	55.2	19	23	23.7	16.5	12-14
FPU18	69	22.5	27.5	29	18.5	14
FPU20	83.4	25.5	32.1	33.5	20.6	14-16-18

SELECTION GUIDE

How to select a microduct straight connector size

Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.

1. Measure both tubesSend the outside and inside diameter of each tube and confirm the material.
2. Match the FPU codeUse the published FPU table as a starting point, then request the exact code and tapered-hole dimensions.
3. Set the installation boundaryState pressure, leak, pull, cable-blowing and temperature test requirements.
4. Confirm documentsRequest the model drawing, current EN 50411-2-8 evidence, packing and quotation terms.

よくある質問

よくある質問

What is a microduct straight connector used for?

It joins two compatible microduct sections so a telecom or FTTH cable route can continue through the joint.

Which tube materials are listed?

The source lists HDPE, PE, nylon and polyurethane. Confirm the exact material pair before selecting a code.

What pressure rating is published?

The supplier lists 0–1.6 MPa operating pressure, 2.5 MPa proof pressure and air tightness of 0.15–0.8 MPa. Confirm test method and project limits.

What sizes are available?

The FPU table includes examples from 3/2.1 to 20/16. Match the measured OD/ID and request the exact code.

Is the connector suitable for outdoor routes?

The page states IP68 and an ambient/fluid temperature range of –40 to 60 °C. Confirm exposure and current test evidence for the route.

What should be included in a quotation request?

Send both tube dimensions, material, route conditions, test requirements, target quantity, packing and document needs.