7 formas 12/10 mm DB HDPE Tubo galería imagen 1

Microductos de HDPE

7 formas de tubo de HDPE BD de 12/10 mm

Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number:7 Ways 12/10mm DB Tube Bundle Type:Tube bundle Place of Origin:Shanghai, China Brand Name:ANMASPC Use:FTTH Warranty Time:12months Network:None Sub duct Inner diameter:10mm Sub duct outer diameter:12mm PE Sheath:3.4mm Outer Diameter::42.8mm (±1.1mm) Melt flow index:0.1 ~ 0.4 g/10 minutes Density:Min. 0.940 g/cm3 Tensile strength at yield:Min. 20MPa Elongation at the break:Min 350% Environmental stress crack resist (F50):Min. 96 hours Storage temperature:-40°C ~ +70°C Supply Ability：1000000 Piece/Pieces per Day       FOB Price: US $0.5 - 9,999 / Piece Min.Order Quantity: 100 Piece/Pieces Supply Ability: 10000 Piece/Pieces per Month

CategoríaMicroductos de HDPE
Enviar consulta Detalles del producto

Detalles del producto

Breve descripción:

Detalles esenciales
Model Number:7 Ways 12/10mm DB Tube Bundle
Type:Tube bundle
Place of Origin:Shanghai, China
ANMASPC
Uso: FTTH
Tiempo de garantía: 12 meses
Red: Ninguna
Diámetro interior del subconducto: 10 mm
Sub duct outer diameter:12mm
PE Sheath:3.4mm
Outer Diameter::42.8mm (±1.1mm)
Índice de fluidez: 0,1 ~ 0,4 g/10 minutos
Densidad: Mín. 0,940 g/cm3
Resistencia a la tracción en el punto de fluencia: Mín. 20 MPa
Alargamiento a la rotura: mín. 350%
Environmental stress crack resist (F50):Min. 96 hours
Storage temperature:-40°C ~ +70°C
Supply Ability：1000000 Piece/Pieces per Day
  • Precio FOB: US $0.5 – 9.999 / unidad
  • Cantidad Mínima de Pedido: 100 Pieza/Piezas
  • Capacidad de suministro: 10000 Pieza/Piezas al mes
    • 7 Ways 12/10 mm DB HDPE Tube detail image 1

    7 WAYS

    A bundle of micro- or mini-tubes (regular wall size) is surrounded by dual HDPE sheath. The design makes the duct assemblies suitable for outdoor direct bury application. The inner micro ducts are optimized for best cable blowing performance.

    Raw materials

    HDPE of a high-molecular type with the following parameters is used for production of the Tube Bundle: – Melt flow index: 0.1 ～ 0.4 g/10 minutes EN ISO 1133 – Density: Min. 0.940 g/cm3 ISO 1183 – Tensile strength at yield: Min. 20MPa ISO 527 – Elongation at the break: Min 350% ISO 527 – Environmental stress crack resist (F50) Min. 96 hours ISO 4599
    Pos.
    Rendimiento mecánico
    Condiciones de prueba
    Rendimiento
    Estándar
    1
    Resistencia a la tracción
    en el rendimiento
    Velocidad de extensión:
    100 mm/min
    ≥620N
    IEC 60794-1-2
    Method E1
    2
    Crush
    Longitud de la muestra: 250 mm
    Load: 380N
    Duration of Max. load: 1 minutes
    Tiempo de recuperación: 1 hora
    The outer and inner diameter shall show, under visual examination without damage and no reduction of diameter greater than 15%.
    IEC 60794-1-2
    Method E3
    3
    Parafilias
    ≤120mm
    –
    IEC 60794-1-2
    Method E10
    4
    Impacto
    Striking surface radius: 10mm
    Impact Energy: 1J
    Number of impact: 3 times
    Tiempo de recuperación: 1 hora
    Under visual examination, there shall be no damage to the micro duct.
    IEC 60794-1-2
    Method E4
    5
    Bend radius
    Number of turns: 5
    Mandrel diameter:144mm.
    Mumber of cycles: 3
    The outer and inner diameter shall show, under visual examination without damage and no reduction of diameter greater than 15%.
    IEC 60794-1-2
    Method E11
    Pos.
    Item
    Specification
    1
    Appearance
    Smooth outer wall (UV-stabilized) without visible impurities; well-proportioned color, no bubbles or cracks; with defined markings
    on outer wall.
    2
    Resistencia a la tracción
    Use Pull socks to tension a sample in accordance with table below:
    Sample length: 1m
    Tensile speed: 20mm/min
    Load: 6800N
    Duration of the tension: 5 min.
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
    3
    Crush Resistance
    A 250mm sample after 1 minute load time and 1 hour recovery time. Load (plate) shall be 2000N. The imprint of the plate on the
    sheath is not considered as mechanical damage.
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
    4
    Impacto
    Striking surface radius shall be 10mm and impact energy 10J. Recovery time shall be one out. The imprint of the striking surface
    on the microduct is not considered as mechanical damage.
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
    5
    Bend
    Diameter of mandrel shall be 40X OD of sample, 4 turns, 3 cycles.
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
    Completed packages of the HDPE Tube Bundle on drums can be stored outdoor max. 6 months upon the date of production. Storage temperature: -40°C ～ +70°C Installation temperature: -30°C ～ +50°C Operating temperature: -40°C ～ +70°C
    Detalles esenciales
    Model Number:7 Ways 12/10mm DB Tube Bundle
    Type:Tube bundle
    Place of Origin:Shanghai, China
    ANMASPC
    Uso: FTTH
    Tiempo de garantía: 12 meses
    Red: Ninguna
    Diámetro interior del subconducto: 10 mm
    Sub duct outer diameter:12mm
    PE Sheath:3.4mm
    Outer Diameter::42.8mm (±1.1mm)
    Índice de fluidez: 0,1 ~ 0,4 g/10 minutos
    Densidad: Mín. 0,940 g/cm3
    Resistencia a la tracción en el punto de fluencia: Mín. 20 MPa
    Alargamiento a la rotura: mín. 350%
    Environmental stress crack resist (F50):Min. 96 hours
    Storage temperature:-40°C ~ +70°C
    Supply Ability：1000000 Piece/Pieces per Day

    EXPLORA MÁS

    Productos relacionados

    • Tubo de galería HDPE FTTH de 12 vías 5/3.5 mm imagen 1

      Tubo HDPE FTTH de 12 vías 5/3.5mm

      Zhejiang Oulu Automatic Equipment Co., Ltd. Descripción corta: Detalles esenciales Número de modelo: 12 vías 5/3.5mm Tubo DI Tipo de haz: Microducto y haz de tubos Lugar de origen: Wenzhou, China Nombre de marca: ANMASPC Uso: FTTH Tiempo de garantía: 24 meses Red: Ninguna Diámetro interior del subtubo: 3.5mm Diámetro exterior del subtubo: 5mm PE...

      Ver detalles Consulta
    • HDPE Pipe Fitting 20-110 mm gallery image 1

      HDPE Pipe Fitting 20-110 mm

      Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Name:HDPE Compression Fitting Size:20-110 mm Origin of Place:Zhejiang, China Color:black,blue, customized Usage:For Irrigation System Pressure:PN16 Certificate:ISO9001 ISO14001 CE Standard:International Standard There are multiple benefits to using HDPE compression fittings in your piping systems....

      Ver detalles Consulta
    • HDPE 3 ways 12/10mm DB TUBE gallery image 1

      HDPE 3 ways 12/10mm DB TUBE

      Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number: 4 ways DB Tube Bundle Type:Micro Duct & Tube Bundle Place of Origin:Wenzhou, China Brand Name:ANMASPC Use:FTTH Warranty Time:12months Network:None Sub duct Inner diameter:10mm Sub duct outer diameter:12mm...

      Ver detalles Consulta

    ¿NECESITA AYUDA?

    Obtén asistencia para los requisitos de tu producto

    Consulta sobre el proyectoComparta los requisitos de su aplicación y su configuración preferida. Soporte técnicoRevise la guía de instalación y las opciones de soporte técnico. Contactar con el departamento de ventasHable con nuestro equipo de ventas sobre productos y plazos de entrega.