Mikrodukt konektori
Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: DESCRIPTION: Simple modular design enables easy installation in all situations, even if cable is already terminated. Made of glass-fiber reinforced polyamide, provides gas-tight sealing of your micro-duct with cable up to 0,5 bar. Very compact design helps to installations in congested spaces like inside ODF.
MICRODUCT CONNECTORS
This microduct divisible gas and water block connector is presented for sealing around an installed cable, including situations where the cable is already terminated.
The supplier lists a two-shell design, glass-fiber-reinforced polyamide body, microduct outside diameters from 10 to 20 mm and gas-tight sealing up to 0.5 bar. Match both duct and cable diameters to the CDDS code before ordering.
TECHNICAL DETAILS
|
Main Features | |||||
|
① 2 shell, divisible solution ② For micro-ducts OD 10 to 20 mm ③ Simple & quick installation ④ Body material: glassfber reinforced polyamide 9Sealing: up to 0,5 bars ⑤ Packaging: 25 pcs per box |
||||||
| SADRŽAJ ČLANAKA | ||||||
|
| Ne | ANMASPC kod | MicroDucts OD | Vanjski promjer kabla | |||
| 1 | CDDS10/2.5 | 10 | 2.5~3.5mm | |||
| 2 | CDDS10/3.5 | 10 | 3.5~5.0mm | |||
| 3 | CDDS12/3.5 | 12 | 3.5~5.0mm | |||
| 4 | CDDS15/5.0 | 12 | 5.0~6.5mm | |||
| 5 | CDDS14/3 | 14 | 3~5mm | |||
| 6 | CDDS14/5 | 14 | 5~6.5mm | |||
| 7 | CDDS14/6.5 | 14 | 6.5~8mm | |||
| 8 | CDDS16/6.5 | 16 | 6.5~8mm | |||
| 9 | CDDS16/8 | 16 | 8~10mm | |||
| 10 | CDDS18/9.4 | 18 | 9.4~12mm | |||
| 11 | CDDS20/9.4 | 20 | 9.4~12mm | |||
PRODUCT DETAIL IMAGES
The original product detail images are retained for visual reference. Confirm the quoted model, dimensions and test requirements before ordering.
SELECTION GUIDE
Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.
OEM & PROJECT CAPABILITY
Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.
B2B SOURCING SUPPORT
The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:
Company-level support and commercial terms should be reconfirmed for the selected product and order.
Često postavljana pitanja
It seals the space between a microduct and an installed cable to help limit gas or water migration along the route.
The source describes a modular two-shell design for installation even when the cable is already terminated.
The listed CDDS range covers microduct outside diameters from 10 to 20 mm.
Match the measured duct outside diameter and cable outside diameter to the same row in the published article table.
The supplier states gas-tight sealing up to 0.5 bar. Confirm the test method and project requirement before specifying it.
Send duct and cable measurements, termination condition, route exposure, test requirements, quantity, packing and document needs.
Istražite više
Zhejiang Oulu Automatic Equipment Co., Ltd. Kratki opis: Mikro-kanalni konektor koji osigurava gasno nepropusnu brtvu oko kabela unutar konektora. Kada se otvori, kabel se može provući kroz konektor i zatim zapečatiti rotirajućim prstenom. Rade sigurno pri radnom pritisku od 10 bar.
Zhejiang Oulu Automatic Equipment Co., Ltd. Kratki opis: Opis: Mikro-spojnik za kanale koji osigurava gasno nepropusnu brtvu oko kabela unutar. Kada se otvori, kabel se može provući kroz ovaj spojnik i zatim zapečatiti rotirajućim prstenom. Radnja se sigurno odvija pri puhanju...
Zhejiang Oulu Automatic Equipment Co., Ltd. Kratki opis: OPIS: Standardne prozirne završne čepove koji se koriste za zatvaranje otvorenih cijevi kako bi se spriječilo curenje zraka, prodor vode ili drugih materijala. Završni čepovi su unaprijed sastavljeni sa sigurnosnim kopčama. GLAVNE KATEGORIJE: ①...
Trebate pomoć?