اتصالات میکروداکت

اتصال بلوکی گاز و آب قابل تفکیک

Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: DESCRIPTION: Simple modular design enables easy installation in all situations, even if cable is already terminated. Made of glass-fiber reinforced polyamide, provides gas-tight sealing of your micro-duct with cable up to 0,5 bar. Very compact design helps to installations in congested spaces like inside ODF.                

دسته‌بندیاتصالات میکروداکت

اتصالات میکرو داکت

Microduct divisible gas and water block connector for retrofit sealing

This microduct divisible gas and water block connector is presented for sealing around an installed cable, including situations where the cable is already terminated.

The supplier lists a two-shell design, glass-fiber-reinforced polyamide body, microduct outside diameters from 10 to 20 mm and gas-tight sealing up to 0.5 bar. Match both duct and cable diameters to the CDDS code before ordering.

جزئیات فنی

اطلاعات محصول منتشر شده

مورد اطلاعات منتشر شده
Product type Two-shell divisible gas and water block connector
Published duct range Microduct outside diameter 10-20 mm
Published cable ranges 2.5-12 mm across the listed CDDS codes
Body / sealing statement Glass-fiber-reinforced polyamide; gas-tight sealing up to 0.5 bar
Published packing 25 pieces per box

راهنمای انتخاب

Selecting a divisible gas and water block connector

از این نقاط بازبینی برای آماده‌سازی پرس‌و‌ش‌های مربوط به محصول استفاده کنید و قبل از سفارش، سوالات مربوط به تطابق، تست و مدارک را حل کنید.

  1. Measure the ductProvide the actual microduct outside diameter and wall condition.
  2. Measure the cableSend the terminated cable outside diameter and identify connectors near the seal.
  3. Match the CDDS codeUse both measurements to select the published duct-and-cable combination.
  4. Confirm the test boundaryRequest the applicable gas, water and pressure test plus packing and current quotation terms.

قابلیت تولید بر اساس سفارش و پروژه

توانایی شرکت در تأمین تجهیزات مخابراتی

Oulu Automatic Equipment خود را به عنوان تامین کننده اتصالات میکروکول، سیستم‌های میکروکول HDPE، لوازم جانبی برای باد کردن کابل و اتصالات پنوماتیک برای پیمانکاران، توزیع‌کنندگان و شرکای OEM معرفی می‌کند.

توانایی‌های شرکت را بررسی کنید

بازرسی کیفیت برای تأمین کننده اتصالات میکرودیو Oulu
بسته بندی انبار برای سفارشات اتصالات میکرودک Oulu

پشتیبانی از تامینکنندگان B2B

حمایت از خرید B2B

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:

  • Provide the actual microduct outside diameter and wall condition.
  • مقدار هدف، ترکیب مدل یا سایز، نیاز به نمونه و ترجیحات بسته بندی.
  • نقشه‌ها، شرایط مسیر، آزمایش‌های فشاری یا ضد نشت و مدارک انطباق.
  • حداقل مقدار خرید فعلی، قیمت، هزینه حمل و نقل، زمان تحویل نمونه و زمان تولید باید در نقل قول تأیید شوند.

حمایت از سطح شرکت و شرایط تجاری باید برای محصول و سفارش انتخاب شده تایید شوند.

ابعاد، شرایط مسیر و مقدار یک محصول را برای دریافت یک قیمت مشخص به اشتراک بگذارید.ارسال نیازهای محصول

حمایت از پروژه

طراحی درستترین راه حل برای لوله‌های میکرونیت

بررسی راهکارهای مسیر میکرودک و خدمت صفحات مربوط به زمینه پروژه، سپس تطابق دقیق، اسناد و شرایط تجاری در پیشنهاد قیمت تأیید کنید.

برنامه خود را مطرح کنید

پرسش‌های متداول

سوالات متداول

What does a microduct gas block connector do?

It seals the space between a microduct and an installed cable to help limit gas or water migration along the route.

Can this divisible connector be fitted after cable termination?

The source describes a modular two-shell design for installation even when the cable is already terminated.

What duct sizes are published?

The listed CDDS range covers microduct outside diameters from 10 to 20 mm.

How do I select the correct CDDS code?

Match the measured duct outside diameter and cable outside diameter to the same row in the published article table.

What sealing pressure is stated?

The supplier states gas-tight sealing up to 0.5 bar. Confirm the test method and project requirement before specifying it.

What should be included in the quotation request?

Send duct and cable measurements, termination condition, route exposure, test requirements, quantity, packing and document needs.