Zinc alloy Straight Connector

Zinc alloy straight connector with a transparent microduct body

This zinc alloy straight connector is presented for joining compatible microducts in a continuous telecom duct route.

Supplier data describes a transparent body for checking tube position, pre-installed tamper-evident safety clips, push-fit assembly and a maximum working pressure of 25 bar. EN 50411-2-8 compliance is supplier-stated and should be supported by current documentation when required.

Key details

Components

1

Collet

POM

2

Locking Clip

POM

3

Cartridge

ZINK ALLOY

4

Lock Claw

SUS301/304

5

Support Ring

POM

6

Seal Ring

TEP

7

Body

PC2807

Fit Tube

Pipe material

HDPE、PE、Nylon、Polyurethane

Outer diameter of pipe

Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ14,Φ16

Technical Parameter

Working with fluids

Air

Tightness

0.15~0.8MPa No Leak

Pull test

400N

Proof pressure

2.5MPa

Operating pressure range

0~1.6MPa

Ambient temperature and fluid temperature

-40~60℃

Installation Temperature

-10℃/+50℃

Recommended Blowing Temperature

-15℃/+35℃

Degree of protection

IP68

UV-resistant grade

F1

Insertion force

50N max(5kg)

Lifespan:

25 years

StAndards:

EN 50411-2-8

Specifications And Dimensions

ANMASPC Code

Pipe OD/ID

Pipe OD/ID

Tapered hole

FPU3/2.1

3/2.1

3/2.1

2.1

FPU4/2.5

4/2.5

4/2.5

2.5

FPU4/2.8

4/2.8

4/2.8

2.8

FPU5/2.1

5/2.1

5/2.1

2.1

FPU5/3.5

5/3.5

5/3.5

3.5

FPU6/4

6/4

6/4

4

FPU7/3.5

7/3.5

7/3.5

3.5

FPU7/4

7/4

7/4

4

FPU7/5.5

7/5.5

7/5.5

5.5

FPU8/3.5

8/3.5

8/3.5

3.5

FPU8/6

8/6

8/6

6

FPU10/6

10/6

10/6

6

FPU10/8

10/8

10/8

8

FPU12/8

12/8

12/8

8

FPU12/10

12/10

12/10

10

FPU14/10

14/10

14/10

10

FPU14/12

14/12

14/12

12

FPU16/12

16/12

16/12

12

FPU16/13

16/13

16/13

13

FPU16/14

16/14

16/14

14

Overall   Dimensions

Model

A

B

C

D

E

F

FPU03

31.9

6.9

10

11.1

3.2

2.1

FPU04

31.9

6.9

10

11.1

4.2

2.8/2.5

FPU05

35.4

8.9

12

12.8

5.2

3.5/2.1

FPU06

35.4

8.9

12

12.8

6.2

4.0

FPU07

41.0

11.5

14.1

15.4

7.2

5.5/4/3.5

FPU08

41.0

11.5

14.1

15.4

8.2

6/3.5

FPU10

42.0

14.0

17.5

18.3

10.2

08/06

FPU12

49.5

15.8

19.2

20.7

12.2

10/08

FPU14

50.5

18.0

22.2

23

14.3

12/10

FPU16

55.0

20.0

24.7

25.1

16.2

14/13/12

Confirming a straight microduct joint

Use these checkpoints to prepare a product-specific enquiry and avoid selecting by a general trade name alone.

1. Match the tube pair: Provide the outside and inside diameter of both microducts and confirm that the selected FPU version matches them.
2. Check the route condition: State tube material, installation environment and the planned cable-blowing conditions.
3. Set test requirements: Confirm operating pressure, proof test, pull requirement and any environmental specification.
4. Request evidence: Ask for the drawing and current documentation supporting the quoted connector and any required standard claim.

OEM & PROJECT CAPABILITY

Company capability for telecom supply

Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.

Explore company capabilities

B2B SOURCING SUPPORT

B2B purchasing support

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. For a product-specific enquiry, include:

• Provide the outside and inside diameter of both microducts and confirm that the selected FPU version matches them.
• Target quantity by size or model, sample needs, mixed specifications and packing preference.
• Project drawings, pressure or sealing requirements, and required compliance or export documents.
• Current MOQ, payment, freight, sample timing and production timing to be confirmed in the quotation.

Company-level service statements and commercial terms should be reconfirmed for the selected product and order.

Share dimensions, route conditions and quantities for a product-specific quotation.
Send product requirements

PRODUCT DETAIL IMAGES

Product Detail

FAQ

What is a microduct straight connector used for?

It creates a straight joint between two compatible microduct sections so the telecom duct route can continue through the connection.

What are the standard sizes of microducts?

Microduct sizes vary by system. The source lists several FPU versions, so confirm both outside and inside diameter against the exact article code.

Why is a straight microduct connector transparent?

The supplier states that the transparent body allows the tube position inside the joint to be checked visually.

How do push-fit microduct connectors lock?

This connector uses a push-fit arrangement with pre-installed safety clips. Follow the confirmed tube preparation and insertion procedure for the selected size.

What pressure can this microduct connector handle?

The supplier publishes a maximum working pressure of 25 bar. Confirm the operating and proof-test conditions for the actual route.

Does this connector comply with EN 50411-2-8?

The supplier page states EN 50411-2-8 compliance, but a current certificate or test report was not independently verified. Request the applicable document if it is required.