Microduct Connectors
Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: DESCRIPTION: Microduct Straight connectors, which guarantee a good performance. Transparent body allows verification of the micro-ducts position inside. Safety clips,tamper evident, are pre-installed. Tested & comply with EN 50411-2-8. MAIN FEATURES: ① Safety clips included ② Push-ft technology ③ Working Pressure: max. 25 bars
MICRODUCT CONNECTORS
These microduct HDPE straight connectors are presented for joining compatible tubes in air-blown fiber and telecom routes.
The source lists a transparent body, push-fit technology, preinstalled safety clips and a POM cartridge. FPU combinations cover tube outside diameters from 3 to 20 mm; confirm the measured OD/ID and project test conditions before ordering.
TECHNICAL DETAILS
|
|
Components | ||||||||||
| 1 | Collet | POM | ||||||||||
| 2 | Locking Clip | POM | ||||||||||
| 3 | Cartridge | POM | ||||||||||
| 4 | Lock Claw | SUS301/304 | ||||||||||
| 5 | Support Ring | POM | ||||||||||
| 6 | Seal Ring | TEP | ||||||||||
| 7 | Body | PC2807 | ||||||||||
| Fit Tube | ||||||||||||
| Pipe material | HDPE、PE、Nylon、Polyurethane | |||||||||||
| Outer diameter of pipe | Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ16,Φ18,Φ20 | |||||||||||
| Technical Parameter | ||||||||||||
| Working with fluids | Air | |||||||||||
| Tightness | 0.15~0.8MPa No Leak | |||||||||||
| Pull test | 400N | |||||||||||
| Proof pressure | 2.5MPa | |||||||||||
| Operating pressure range | 0~1.6MPa | |||||||||||
| Ambient temperature and fluid temperature | -40~60℃ | |||||||||||
| Installation Temperature | -10℃/+50℃ | |||||||||||
| Recommended Blowing Temperature | -15℃/+35℃ | |||||||||||
| Degree of protection | IP68 | |||||||||||
| UV-resistant grade | F1 | |||||||||||
| Insertion force | 50N max(5kg) | |||||||||||
| Lifespan: | 25 years | |||||||||||
| StAndards: | EN 50411-2-8 | |||||||||||
| TABLE OF ARTICLES | ||||||||||||
| ANMASPC Code | Pipe OD/ID | Pipe OD/ID | Tapered hole | |||||||||
| FPU3/2.1 | 3/2.1 | 3/2.1 | 2.1 | |||||||||
| FPU4/2.5 | 4/2.5 | 4/2.5 | 2.5 | |||||||||
| FPU4/2.8 | 4/2.8 | 4/2.8 | 2.8 | |||||||||
| FPU5/2.1 | 5/2.1 | 5/2.1 | 2.1 | |||||||||
| FPU5/3.5 | 5/3.5 | 5/3.5 | 3.5 | |||||||||
| FPU6/4 | 6/4 | 6/4 | 4.0 | |||||||||
| FPU7/3.5 | 7/3.5 | 7/3.5 | 3.5 | |||||||||
| FPU7/4 | 7/4 | 7/4 | 4.0 | |||||||||
| FPU7/5.5 | 7/5.5 | 7/5.5 | 5.5 | |||||||||
| FPU8/3.5 | 8/3.5 | 8/3.5 | 3.5 | |||||||||
| FPU8/6 | 8/6 | 8/6 | 6.0 | |||||||||
| FPU10/6 | 10/6 | 10/6 | 6.0 | |||||||||
| FPU10/8 | 10/8 | 10/8 | 8.0 | |||||||||
| FPU12/8 | 12/8 | 12/8 | 8.0 | |||||||||
| FPU12/10 | 12/10 | 12/10 | 10.0 | |||||||||
| FPU14/10 | 14/10 | 14/10 | 10.0 | |||||||||
| FPU14/12 | 14/12 | 14/12 | 12.0 | |||||||||
| FPU16/12 | 16/12 | 16/12 | 12.0 | |||||||||
| FPU16/13 | 16/13 | 16/13 | 13.0 | |||||||||
| FPU16/14 | 16/14 | 16/14 | 14.0 | |||||||||
| FPU18/15 | 18/15 | 18/15 | 15.0 | |||||||||
| FPU20/14 | 20/14 | 20/14 | 14.0 | |||||||||
| FPU20/15 | 20/15 | 20/15 | 15.0 | |||||||||
| FPU20/16 | 20/16 | 20/16 | 16.0 | |||||||||
| Overall Dimensions | ||||||||||||
|
||||||||||||
| Model | A | B | C | D | E | F | ||||||
| FPU3 | 28.8 | 5.5 | 8.0 | 8.3 | 3.2 | 2.1 | ||||||
| FPU5 | 36.5 | 8.0 | 10.7 | 11.6 | 5.2 | 2-3.5 | ||||||
| FPU7 | 38.8 | 10.9 | 13.4 | 14.7 | 7.3 | 3.5-4-5.5 | ||||||
| FPU9 | 38.8 | 11.0 | 13.4 | 14.7 | 6.3 | 3.5-6 | ||||||
| FPU10 | 43.0 | 12.9 | 15.6 | 16.5 | 10.3 | 6-8 | ||||||
| FPU12 | 47.0 | 14.7 | 17.5 | 19.1 | 12.4 | 8-10 | ||||||
| FPU14 | 49.8 | 16.9 | 20.0 | 21.1 | 14.5 | 10-12 | ||||||
| FPU16 | 55.2 | 19.0 | 23.0 | 23.7 | 16.5 | 12-14 | ||||||
| FPU18 | 69.0 | 22.5 | 27.5 | 29.0 | 18.5 | 14.0 | ||||||
| FPU20 | 83.4 | 25.5 | 32.1 | 33.5 | 20.6 | 14-16-18 | ||||||
PRODUCT DETAIL IMAGES
The original product detail images are retained for visual reference. Confirm the quoted model, dimensions and test requirements before ordering.
SELECTION GUIDE
Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.
OEM & PROJECT CAPABILITY
Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.
B2B SOURCING SUPPORT
The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:
Company-level support and commercial terms should be reconfirmed for the selected product and order.
FAQ
They join compatible microduct sections in a straight air-blown fiber or telecom route.
Provide the measured outside and inside diameter of both tubes and match them to the published FPU row.
Joint alignment, tube fit and sealing matter to the route. Confirm the correct FPU code and installation procedure before blowing.
The supplier states 0-1.6 MPa operating pressure, 2.5 MPa proof pressure and air tightness from 0.15 to 0.8 MPa.
The source recommends -15 to 35 °C for blowing. Confirm that range against the project method.
Send tube measurements and materials, blowing conditions, pressure and pull tests, quantity, packing and required documents.
EXPLORE MORE
Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: DESCRIPTION: Soft PVC caps provides anti-dust protection of your duct ends. They have an excellent resistance to weather conditions And UV radiation. Ideally used for transport, storage or installation period of your...
Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: DESCRIPTION： Standard transparent end caps, which are used to terminate open ended Tubes to avoid air leakage, water or other material ingress. End caps are preassembled with security clips. MAIN FEATURES： ①...
Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Standard transparent end caps, which are used to terminate open ended Tubes to avoid air leakage, water or other material ingress. End caps are preassembled with security clips. ...
NEED ASSISTANCE?