푸시온 마이크로덕트 커넥터 – 제너럴 머신 프로덕츠 스트레이트

Push-on microduct connector for straight cable-blowing joints

This push-on microduct connector is presented as a straight joint accessory for pipe-network construction and cable blowing.

The supplier states that the joint can withstand blowing pressure of not less than 16 bar, provides gas sealing and uses a translucent body so tube position and blowing status can be observed.

Key details

Planning a push-on connector for cable blowing

Use these checkpoints to prepare a product-specific enquiry and avoid selecting by a general trade name alone.

1. Match the ducts: Provide the outside and inside diameter and material of both tubes.
2. Define blowing conditions: State the planned blowing pressure, cable and route conditions for connector confirmation.
3. Set field checks: Confirm tube preparation, full insertion, visual inspection and leak testing.
4. Confirm procurement terms: Request the exact model, sample, packing, current lead time and any required test documents.

OEM & PROJECT CAPABILITY

Company capability for telecom supply

Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.

Explore company capabilities

B2B SOURCING SUPPORT

B2B purchasing support

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. For a product-specific enquiry, include:

• Provide the outside and inside diameter and material of both tubes.
• Target quantity by size or model, sample needs, mixed specifications and packing preference.
• Project drawings, pressure or sealing requirements, and required compliance or export documents.
• Current MOQ, payment, freight, sample timing and production timing to be confirmed in the quotation.

Company-level service statements and commercial terms should be reconfirmed for the selected product and order.

Share dimensions, route conditions and quantities for a product-specific quotation.
Send product requirements

PRODUCT DETAIL IMAGES

Product Detail

자주 묻는 질문

What is a microduct connector used for?

It joins microduct sections so a protected fiber route can continue through the joint. This version is intended for straight push-on connection.

What is a microduct cable?

It is a fiber cable selected for installation inside a microduct, often using air blowing. The connector should maintain the aligned path and required sealing.

How do push-on microduct connectors work?

The tubes are inserted into the connector to form the joint. Confirm tube preparation, insertion depth and leak-test steps for the selected model.

Why does this straight connector have a translucent body?

The supplier states that it allows the installer to observe tube position and the blowing status at the connection.

What blowing pressure can this connector withstand?

The supplier states a blowing pressure of not less than 16 bar. Confirm the exact test conditions and project operating requirement.

What commercial details should be reconfirmed before ordering?

Confirm the exact model, sample terms, stock, MOQ, packing, payment, delivery, warranty and compliance documents in the current quotation.