MICRODUCT CONNECTORS
This microduct reducer coupler is presented for connecting two microducts with different outside diameters, such as a direct-buried-to-indoor transition.
The source lists FPG reducer codes, push-fit technology, pre-installed safety clips, IP68 protection and a maximum working-pressure statement. Confirm both tube dimensions, the correct tapered-hole code and the route test conditions before ordering.
TECHNICAL DETAILS
|
|
コンポーネント | ||||||||||||||
| 1 | コレット | POM | ||||||||||||||
| 2 | ロッキングクリップ | POM | ||||||||||||||
| 3 | カートリッジ | POM | ||||||||||||||
| 4 | ロック・クロウ | SUS301/304 | ||||||||||||||
| 5 | サポートリング | POM | ||||||||||||||
| 6 | シグネットリング | TEP | ||||||||||||||
| 7 | 本文 | PC2807 | ||||||||||||||
| フィットチューブ | ||||||||||||||||
| 配管材料 | HDPE、PE、Nylon、Polyurethane | |||||||||||||||
| 配管の外径 | Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ16,Φ18,Φ20 | |||||||||||||||
| Technical Parameter | ||||||||||||||||
| 流体の取り扱い | 空気 | |||||||||||||||
| 締め付け感 | 0.15～0.8MPa 漏れなし | |||||||||||||||
| 引張り試験 | 400N | |||||||||||||||
| 耐圧 | 2.5MPa | |||||||||||||||
| 使用圧力範囲 | 0〜1.6MPa | |||||||||||||||
| 周囲温度と流体温度 | -40~60℃ | |||||||||||||||
| 設置温度 | -10℃/+50℃ | |||||||||||||||
| 推奨ブロー温度 | -15℃/+35℃ | |||||||||||||||
| 保護等級 | IP68 | |||||||||||||||
| 耐候性グレード | F1 | |||||||||||||||
| 挿入力 | 最大50N（5kg） | |||||||||||||||
| 寿命 | 25年 | |||||||||||||||
| 基準： | EN 50411-2-8 | |||||||||||||||
| 条文一覧 | ||||||||||||||||
| ANMASPCコード | Pipe OD/ID | Pipe OD/ID | Tapered hole | |||||||||||||
| FPG5-3/2.1 | 5/3.5 | 3/2.1 | 3.5>2.1 | |||||||||||||
| FPG5-4/2.8 | 5/3.5 | 4/2.8 | 3.5>2.8 | |||||||||||||
| FPG7-3/2.1 | 7/5.5 | 3/2.1 | 5.5 > 2.1 | |||||||||||||
| FPG7-4/2.8 | 7/5.5 | 4/2.8 | 5.5>2.8 | |||||||||||||
| FPG7-5/3.5 | 7/5.5 | 5/3.5 | 5.5>3.5 | |||||||||||||
| FPG8-3/2.1 | 8/6 | 3/2.1 | 6 > 2.1 | |||||||||||||
| FPG8-5/3.5 | 8/6 | 5/3.5 | 6>3.5 | |||||||||||||
| FPG8-7/5.5 | 8/6 | 7/5.5 | 6>5.5 | |||||||||||||
| FPG10-5/3.5 | 10/8 | 5/3.5 | 8>3.5 | |||||||||||||
| FPG10-7/5.5 | 10/8 | 7/5.5 | 8>5.5 | |||||||||||||
| FPG10-8/6 | 10/8 | 8/6 | 8>6 | |||||||||||||
| FPG12-7/5.5 | 12/10 | 10/8 | 10>5.5 | |||||||||||||
| FPG12-8/6 | 12/10 | 7/5.5 | 10>6 | |||||||||||||
| FPG12-10/8 | 12/10 | 12/10 | 10>8 | |||||||||||||
| FPG14-10/8 | 14/12 | 8/6 | 12>8 | |||||||||||||
| FPG14-12/10 | 14/12 | 10/8 | 12>10 | |||||||||||||
| FPG16-10/8 | 16/13 | 10/8 | 13>8 | |||||||||||||
| FPG16-12/10 | 16/13 | 12/10 | 13>10 | |||||||||||||
| FPG20-16/14 | 20/16 | 16/13 | 16>13 | |||||||||||||
| 全体寸法 | ||||||||||||||||
|
||||||||||||||||
| モデル | A | B | C | D | H | EA | ED | EC | ||||||||
| FPG5-3 | 3.2 | 2.1 | 8.4 | 7.8 | 32.2 | 5.2 | 10.7 | 11.8 | ||||||||
| FPG7-3 | 3.2 | 3.5 | 8.4 | 7.8 | 33.8 | 7.2 | 13.4 | 14.7 | ||||||||
| FPG8-3 | 3.2 | 3.5 | 8.4 | 7.8 | 33.8 | 8.3 | 13.4 | 14.7 | ||||||||
| FPG7-5 | 5.2 | 3.5 | 11.9 | 10.7 | 37.5 | 7.2 | 13.4 | 14.8 | ||||||||
| FPG8-5 | 5.2 | 3.5 | 11.9 | 10.7 | 37.5 | 8.3 | 13.4 | 14.8 | ||||||||
| FPG10-7 | 7.3 | 5.5 | 14.7 | 13.4 | 41 | 10.3 | 15.6 | 16.7 | ||||||||
| FPG10-8 | 8.3 | 5.5 | 14.7 | 13.4 | 41 | 10.3 | 15.6 | 16.7 | ||||||||
| FPG12-8 | 8.3 | 6 | 15.4 | 13.4 | 43 | 12.4 | 17.4 | 19.1 | ||||||||
| FPG12-10 | 10.3 | 8 | 16.7 | 15.6 | 45 | 12.4 | 17.4 | 19.1 | ||||||||
| FPG14-12 | 14.5 | 10 | 21.2 | 20 | 48.4 | 12.4 | 17.4 | 19.1 | ||||||||
| FPG16-12 | 16.5 | 10 | 24.4 | 23 | 51 | 12.4 | 17.5 | 19.3 | ||||||||
PRODUCT DETAIL IMAGES
The original product detail images are retained below for visual reference. Confirm the quoted model and dimensions before ordering.
SELECTION GUIDE
Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.
OEM & PROJECT CAPABILITY
Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.
B2B SOURCING SUPPORT
The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:
Company-level support and commercial terms should be reconfirmed for the selected product and order.
よくある質問
It connects two compatible microducts with different outside diameters, often at a route transition.
The source describes DB-to-DI transition use, such as entering a house. Confirm both tube specifications for the selected FPG code.
Provide OD/ID and material for both ducts and request the matching FPG code and tapered-hole dimensions.
The source states 0–1.6 MPa operating pressure and 2.5 MPa proof pressure. Confirm the test method and project safety margin.
IP68 is stated on the source page. Confirm environmental exposure and current model evidence before specification.
Send both duct dimensions, transition location, route conditions, tests, quantity, packing and drawing or compliance requirements.
もっと見る
浙江欧陆自动化设备有限公司推出的可拆分微管密封件（Divisible Microduct Seal）隆重登场，这是一种专为高效光纤网络管理而设计的尖端解决方案。这项创新的密封技术可提供卓越的防尘、防潮及其他环境因素的保护，确保...
浙江欧路自动化设备有限公司の直埋式ストレートコネクターをご紹介します。マイクロダクト間のシームレスな接続専用に設計された当社の革新的なシステムは、簡単かつ迅速な設置を実現し、さまざまな用途に最適です。当社の堅牢な構造...
