マイクロダクトコネクタ
Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: DESCRIPTION： Standard transparent end caps, which are used to terminate open ended Tubes to avoid air leakage, water or other material ingress. End caps are preassembled with security clips. MAIN FEATURES： ① Safety clips included ② Push-ft technology ③ Working Pressure: max. 25 bars
MICRODUCT CONNECTORS
This microduct end stop end cap is presented for terminating an open tube and helping limit air leakage, water and material ingress.
The source lists transparent FPF3-FPF20 caps, preinstalled security clips and push-fit technology for compatible tube materials. IP68, pressure and EN 50411-2-8 statements are supplier-stated; confirm the selected FPF size and current evidence.
TECHNICAL DETAILS
|
|
コンポーネント | |||||||
| 1 | コレット | POM | |||||||
| 2 | ロッキングクリップ | POM | |||||||
| 3 | カートリッジ | 亜鉛合金 | |||||||
| 4 | ロック・クロウ | SUS301/304 | |||||||
| 5 | サポートリング | POM | |||||||
| 6 | シグネットリング | TEP | |||||||
| 7 | 本文 | PC2807 | |||||||
| フィットチューブ | |||||||||
| 配管材料 | HDPE、PE、Nylon、Polyurethane | ||||||||
| 配管の外径 | Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ16,Φ18,Φ20 | ||||||||
| Technical Parameter | |||||||||
| 流体の取り扱い | 空気 | ||||||||
| 締め付け感 | 0.15～0.8MPa 漏れなし | ||||||||
| 引張り試験 | 400N | ||||||||
| 耐圧 | 2.5MPa | ||||||||
| 使用圧力範囲 | 0〜1.6MPa | ||||||||
| 周囲温度と流体温度 | -40~60℃ | ||||||||
| 設置温度 | -10℃/+50℃ | ||||||||
| 推奨ブロー温度 | -15℃/+35℃ | ||||||||
| 保護等級 | IP68 | ||||||||
| 耐候性グレード | F1 | ||||||||
| 挿入力 | 最大50N（5kg） | ||||||||
| 寿命 | 25年 | ||||||||
| 基準： | EN 50411-2-8 | ||||||||
| 仕様と寸法 | |||||||||
| ANMASPCコード | 外径/内径 | ||||||||
| FPF3 | 3 | ||||||||
| FPF4 | 4 | ||||||||
| FPF5 | 5 | ||||||||
| FPF6 | 6 | ||||||||
| FPF7 | 7 | ||||||||
| FPF8 | 8 | ||||||||
| FPF10 | 10 | ||||||||
| FPF12 | 12 | ||||||||
| FPF14 | 14 | ||||||||
| FPF16 | 16 | ||||||||
| FPF18 | 18 | ||||||||
| FPF20 | 20 | ||||||||
PRODUCT DETAIL IMAGES
The original product detail images are retained for visual reference. Confirm the quoted model, dimensions and test requirements before ordering.
SELECTION GUIDE
Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.
OEM & PROJECT CAPABILITY
Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.
B2B SOURCING SUPPORT
The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:
Company-level support and commercial terms should be reconfirmed for the selected product and order.
よくある質問
It terminates an open tube and helps limit air leakage, water or other material ingress.
The source lists FPF3 through FPF20 at the stated nominal outside diameters.
The page lists HDPE, PE, nylon and polyurethane. Confirm the exact tube material and fit.
The supplier states 0-1.6 MPa operating pressure, 2.5 MPa proof pressure and air tightness from 0.15 to 0.8 MPa.
IP68 is stated on the source page. Request current model-specific evidence when it is required.
Provide tube OD/ID and material, closure duty, pressure and environmental tests, size code, quantity, packing and documents.
もっと見る
浙江欧路自动设备有限公司 简短描述： 描述：微管连接器，在内部电缆周围提供气密密封连接。打开时，可以通过此连接器吹入电缆，然后通过旋转环进行密封。它们在吹气作业时安全运行…….
浙江欧路自动化设备有限公司の直埋式ストレートコネクターをご紹介します。マイクロダクト間のシームレスな接続専用に設計された当社の革新的なシステムは、簡単かつ迅速な設置を実現し、さまざまな用途に最適です。当社の堅牢な構造...
