اتصالات میکروداکت

اتصال مسدودکننده گاز میکروداکت

شرکت تجهیزات اتوماتیک ژجیانگ اولو، با مسئولیت محدود توضیحات کوتاه: توضیحات: اتصالات میکرو‌داکت که اتصال آب‌بند و مقاوم در برابر گاز را در اطراف کابل درون آن فراهم می‌کند. در صورت باز بودن، کابل می‌تواند از طریق این اتصال دمیده شود و پس از آن با چرخاندن حلقه آب‌بند شود. آن‌ها با ایمنی در فشار دمش ۱۰ بار کار می‌کنند و حفره داخلی میکرو‌داکت‌های شما را در برابر نفوذ هرگونه ذره محافظت می‌کنند. همیشه باید در نقاط انتقال ورودی به ساختمان‌ها، ODFها و غیره که وجود آب یا گاز مایه خطر است، نصب شوند. دو گیره قفل‌کننده را می‌توان به طور جداگانه سفارش داد تا از آزاد شدن خود1به‌خود میکرو‌داکت‌ها جلوگیری شود. ویژگی‌های اصلی: ① موجود برای طیف وسیعی از اندازه‌های میکرو‌داکت با قطر خارجی ۴ تا ۱۶ ② سیستم اتصال فشاری ③ بدنه شفاف ④ جنس بدنه: پلی‌کربنات ⑤ آب‌بندی: تا ۰.۳ بار ⑥ بسته‌بندی: کیسه              

دسته‌بندیاتصالات میکروداکت

اتصالات میکرو داکت

Microduct gas block connector for building and ODF entry transitions

This microduct gas block connector is presented for creating a gas-tight seal around a cable inside a microduct.

The source describes an open-then-seal workflow, rotating-ring closure, 4-16 mm microduct OD coverage, a transparent body and supplier-stated pressure and IP68 data. Confirm the selected FZA code and current test evidence.

جزئیات فنی

اطلاعات محصول منتشر شده

مورد اطلاعات منتشر شده
Product type Straight microduct gas block connector
Published duct coverage Microduct outside diameters 4-16 mm stated
Installation sequence Cable can be blown through open connector, then sealed by rotating the ring
Pressure statement 10 bar blowing pressure stated for the product description
برنامه کاربردی Building and ODF entry transitions; optional locking clips

راهنمای انتخاب

Selecting a gas block for an entry transition

از این نقاط بازبینی برای آماده‌سازی پرس‌و‌ش‌های مربوط به محصول استفاده کنید و قبل از سفارش، سوالات مربوط به تطابق، تست و مدارک را حل کنید.

  1. Measure the ductProvide actual microduct OD/ID and material.
  2. Measure the cableSend cable diameter and identify whether it is already installed or will be blown.
  3. Define the transitionState building entry, ODF, cabinet and gas or water exposure.
  4. Request evidenceConfirm FZA code, pressure and sealing tests, clips, quantity, packing and documents.

قابلیت تولید بر اساس سفارش و پروژه

توانایی شرکت در تأمین تجهیزات مخابراتی

Oulu Automatic Equipment خود را به عنوان تامین کننده اتصالات میکروکول، سیستم‌های میکروکول HDPE، لوازم جانبی برای باد کردن کابل و اتصالات پنوماتیک برای پیمانکاران، توزیع‌کنندگان و شرکای OEM معرفی می‌کند.

توانایی‌های شرکت را بررسی کنید

بازرسی کیفیت برای تأمین کننده اتصالات میکرودیو Oulu
بسته بندی انبار برای سفارشات اتصالات میکرودک Oulu

پشتیبانی از تامینکنندگان B2B

حمایت از خرید B2B

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:

  • Provide actual microduct OD/ID and material.
  • مقدار هدف، ترکیب مدل یا سایز، نیاز به نمونه و ترجیحات بسته بندی.
  • نقشه‌ها، شرایط مسیر، آزمایش‌های فشاری یا ضد نشت و مدارک انطباق.
  • حداقل مقدار خرید فعلی، قیمت، هزینه حمل و نقل، زمان تحویل نمونه و زمان تولید باید در نقل قول تأیید شوند.

حمایت از سطح شرکت و شرایط تجاری باید برای محصول و سفارش انتخاب شده تایید شوند.

ابعاد، شرایط مسیر و مقدار یک محصول را برای دریافت یک قیمت مشخص به اشتراک بگذارید.ارسال نیازهای محصول

حمایت از پروژه

طراحی درستترین راه حل برای لوله‌های میکرونیت

بررسی راهکارهای مسیر میکرودک و خدمت صفحات مربوط به زمینه پروژه، سپس تطابق دقیق، اسناد و شرایط تجاری در پیشنهاد قیمت تأیید کنید.

برنامه خود را مطرح کنید

پرسش‌های متداول

سوالات متداول

What does a microduct gas block connector do?

It seals around the cable inside a microduct to help limit gas, water and particle ingress at an entry transition.

Can cable be blown through this connector?

The source describes blowing cable through the open connector and sealing it afterwards by rotating the ring.

What duct sizes are published?

The description states coverage for microduct outside diameters from 4 to 16 mm. Confirm the exact article code.

Where is a building entry gas block installed?

The page identifies building and ODF entry transition points where water or gas presence matters.

What pressure information is stated?

The source states safe operation at 10 bar blowing pressure and lists additional supplier-stated pressure data. Confirm the test method.

What should an FZA quotation request include?

Provide duct OD/ID, cable diameter, transition location, blowing and sealing tests, locking-clip requirement, quantity and documents.