HDPE Microducts

12 ways 5/3.5mm FTTH HDPE TUBE

Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number:12ways 5/3.5mm DI Tube Bundle Type:Micro Duct & Tube bundle Place of Origin:Wenzhou, China Brand Name:ANMASPC Use：FTTH Warranty Time:24months Network:None Sub duct Inner diameter:3.5mm Sub duct outer diameter:5mm PE Sheath:1.7mm Outer Diameter::23.7mm (± 1.1mm) Tensile Strength:≥ 2200N Storage Temperature::-40°C ~ +70°C Installation Temperature:-30°C ~ +50°C Operating Temperature:-40°C ~ +70°C Min. bend radius:480mm Crush:1000N Supply Ability：1000000 Meter/Meters per Week FOB Price: US $0.5 - 9,999 / Piece Min.Order Quantity: 100 Piece/Pieces Supply Ability: 10000 Piece/Pieces per Month

CategoryHDPE Microducts

Send Inquiry Product Details

HDPE MICRODUCTS

12-way 5/3.5 mm FTTH HDPE microduct tube bundle

This 12-way FTTH HDPE microduct tube bundle is specified for fiber-optic cable installation and air-blown microduct routes.

The captured source states 5.0 mm sub-duct OD, 3.5 mm ID, 1.7 mm PE sheath, 23.7 mm bundle OD, at least 2,200 N tensile strength and a 480 mm minimum bend radius. These are supplier-stated values; confirm the production drawing and test batch.

TECHNICAL DETAILS

Published product facts

Physical and Mechanical Properties – Inner Micro duct 5/3.5mm
1	Visual appearance	Visual inspection	Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness.
2	Outer diameter	ANMASPC	5.0mm ± 0.1mm
3	Wall thickness	ANMASPC	0.75mm ± 0.10mm
4	Inner diameter clearance	Blowing steel ball	A 3.0mm steel ball can be blown freely through the duct.
5	Ovality	ANMASPC	≤ 5%
6	Pressurization	5 minutes @15bar each duct	No damage and leakage
7	Kink	IEC 60794-1-2 Method E10	≤ 50mm
8	Tensile strength	Rate of extension: 100mm/min	≥ 185N
9	Crush	Sample length: 250mm Load: 550N Duration of Max. load: 1 min Recovery time: 1 hour	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
10	Impact	IEC 60794-1-2 Method E4 1.0 J Impact, recovery time 1 hour	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
11	Heat reversion	110℃ ～ 23℃, 1 hour	≤ 3%
12	Min. bend radius	60mm	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
13	Co-efficient of Friction	750mm Diameter, 450°loop, 5kg mass	≤ 0.1
14	Color and printing	Visual inspection	As per customer specification

Test	Characteristic	Test Method	Acceptance Criteria
Physical and Mechanical Properties – tube bundles
1	Visual appearance	Visual inspection, Outer sheath: Black	Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness.
2	Outer diameter	ANMASPC	23.7mm (± 1.1mm)
3	Sheath Wall thickness	ANMASPC	1.70mm ± 0.20mm
4	Pressurization	5 minutes @15 bar each duct	No damage and leakage
5	Tensile strength	Rate of extension: 100mm/min	≥ 2200N
6	Crush	Sample length: 250mm Load: 1000N Duration of Max. load: 1 min Recovery time: 1 hour	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
7	Impact	IEC 60794-1-2 Method E4 3.0J Impact, recovery time 1 hour	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
8	Min. bend radius	480mm	No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
9	Color and printing	Visual inspection	Orange or as per customer specification

PRODUCT DETAIL IMAGES

Product Detail

The original product detail images are retained for visual reference. Confirm the quoted model, dimensions and test requirements before ordering.

12-Way 5/3.5 mm FTTH HDPE Microduct Tube Bundle detail 1

SELECTION GUIDE

Selecting a 12-way 5/3.5 mm FTTH tube bundle

Use these checkpoints to prepare a product-specific enquiry and close the fit, test and documentation questions before ordering.

Confirm the fiber countMatch 12 ways to the planned cable and route capacity.
Check the inner ductConfirm the 5/3.5 mm OD/ID and cable-blowing clearance.
Plan handlingUse the 23.7 mm bundle OD and 480 mm minimum bend radius for route design.
Request batch evidenceConfirm drawing, pressure, crush, tensile, color, drum packing and quantity.

OEM & PROJECT CAPABILITY

Company capability for telecom supply

Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.

Explore company capabilities

Quality inspection for Oulu microduct connector supply

Warehouse packing for Oulu microduct connector orders

B2B SOURCING SUPPORT

B2B purchasing support

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. Include these details in a product enquiry:

Match 12 ways to the planned cable and route capacity.
Target quantity, model or size mix, sample needs and packing preference.
Drawings, route conditions, pressure or sealing tests and compliance documents.
Current MOQ, price, freight, sample timing and production timing to be confirmed in the quotation.

Company-level support and commercial terms should be reconfirmed for the selected product and order.

Share dimensions, route conditions and quantities for a product-specific quotation.Send product requirements

FAQ

Frequently asked questions

What is a 12-way 5/3.5 mm microduct bundle used for?

It provides twelve small HDPE pathways for FTTH or air-blown fiber installation.

What are the inner duct dimensions?

The source states 5 mm outside diameter and 3.5 mm inside diameter for each inner microduct.

What is the bundle outside diameter?

The published bundle outside diameter is 23.7 mm ±1.1 mm.

What tensile strength is stated?

The supplier states a bundle tensile strength of at least 2,200 N. Confirm the test report for the quoted batch.

What temperature range is published?

Storage is stated as -40 to +70 °C, installation -30 to +50 °C and operation -40 to +70 °C.

What should a tube-bundle enquiry include?

Provide way count, OD/ID, route length, bend conditions, color, drum packing, quantity and test documents.

EXPLORE MORE

Related Products

7 Ways 12/10 mm DB HDPE Tube

Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number:7 Ways 12/10mm DB Tube Bundle Type:Tube bundle Place of Origin:Shanghai, China Brand Name:ANMASPC Use:FTTH Warranty Time:12months Network:None Sub duct Inner diameter:10mm Sub duct outer diameter:12mm PE Sheath:3.4mm Outer...

View Details Inquiry
HDPE Pipe Tube 2ways 14/10mm

Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number:2ways 14/10mm DB Tube Bundle Type:Micro Duct & Tube Bundle Place of Origin:Wemzhou, China Brand Name:ANMASPC Use:FTTH Warranty Time:12months Network:None Sub duct Inner diameter:10mm Sub duct outer diameter:14mm Thickness:1.2mm...

View Details Inquiry
HDPE 2 way

Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: The micro-pipeline system consists of single-hole microtubes, microtubule bundle tubes(abbreviated as bundle tube),high-performance air-blown optical cables,pipeline system accessories and air-blown construction machine and tools. - A bundle of micro- or mini-tubes (strengthened...

View Details Inquiry

NEED ASSISTANCE?

Get support for your product requirements

Project InquiryShare your application requirements and preferred configuration. Technical SupportReview installation guidance and service support options. Contact SalesTalk with our sales team about products and lead times.