{"id":302,"date":"2026-08-24T11:30:52","date_gmt":"2026-08-24T03:30:52","guid":{"rendered":"https:\/\/microductconnector.com\/product\/7-ways-1210-mm-with-pe-sheath-3-4mm-direct-buried-db-hdpe-micro-duct-tube-bundle-for-air-blowing-cable-installation-project-product\/"},"modified":"2026-09-03T09:33:38","modified_gmt":"2026-09-03T09:33:38","slug":"7-ways-1210-mm-with-pe-sheath-3-4mm-direct-buried-db-hdpe-micro-duct-tube-bundle-for-air-blowing-cable-installation-project-product","status":"publish","type":"product","link":"https:\/\/microductconnector.com\/tr\/product\/7-ways-1210-mm-with-pe-sheath-3-4mm-direct-buried-db-hdpe-micro-duct-tube-bundle-for-air-blowing-cable-installation-project-product\/","title":{"rendered":"7 Ways 12\/10 mm DB HDPE Tube"},"content":{"rendered":"

\u00dcr\u00fcn Detaylar\u0131<\/h2>\n

\tZhejiang Oulu Automatic Equipment Co., Ltd.<\/span><\/p>\n

K\u0131sa A\u00e7\u0131klama:<\/h3>\n
\n
Essential details<\/div>\n
\n
\n
Model Number:7 Ways 12\/10mm DB Tube Bundle<\/dt>\n<\/dl>\n
\n
Type:Tube bundle<\/dt>\n<\/dl>\n
\n
Place of Origin:Shanghai, China<\/dt>\n<\/dl>\n
\n
ANMASPC<\/dt>\n<\/dl>\n
\n
Use:FTTH<\/dt>\n<\/dl>\n
\n
Warranty Time:12months<\/dt>\n<\/dl>\n
\n
Network:None<\/dt>\n<\/dl>\n
\n
Sub duct Inner diameter:10mm<\/dt>\n<\/dl>\n
\n
Sub duct outer diameter:12mm<\/dt>\n<\/dl>\n
\n
PE Sheath:3.4mm<\/dt>\n<\/dl>\n
\n
Outer Diameter::42.8mm (\u00b11.1mm)<\/dt>\n<\/dl>\n
\n
Melt flow index:0.1 ~ 0.4 g\/10 minutes<\/dt>\n<\/dl>\n
\n
Density:Min. 0.940 g\/cm3<\/dt>\n<\/dl>\n
\n
Tensile strength at yield:Min. 20MPa<\/dt>\n<\/dl>\n
\n
Elongation at the break:Min 350%<\/dt>\n<\/dl>\n
\n
Environmental stress crack resist (F50):Min. 96 hours<\/dt>\n<\/dl>\n
\n
Storage temperature:-40\u00b0C ~ +70\u00b0C<\/dt>\n<\/dl>\n<\/div>\n
\n
Supply Ability\uff1a1000000 Piece\/Pieces per Day<\/div>\n<\/div>\n

\u00a0<\/p>\n

\u00a0<\/p>\n

\u00a0<\/p>\n<\/p>\n<\/div>\n

<\/p>\n

  • \nFOB Fiyat\u0131: <\/em> US $0.5 – 9,999 \/ Piece <\/li>\n
  • \nMin. Sipari\u015f Miktar\u0131: <\/em> 100 Adet<\/li>\n
  • \nTedarik Yetene\u011fi: <\/em> Ayda 10000 Adet<\/li>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n<\/div><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n\t\t\t\t\"7\n<\/div>\n<\/p><\/div>\n<\/div>\n

    7 WAYS<\/span><\/h3>\n
    \n
    \n
    \n
    \n
    \n
    \n
    A bundle of micro- or mini-tubes (regular wall size) is surrounded by dual HDPE sheath. The design makes the duct assemblies suitable for outdoor direct bury application. The inner micro ducts are optimized for best cable blowing performance.<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
    \n
    \n
    \n

    Raw materials<\/span><\/h3>\n
    \n
    \n
    HDPE of a high-molecular type with the following parameters is used for production of the Tube Bundle: – Melt flow index: 0.1 \uff5e 0.4 g\/10 minutes EN ISO 1133 – Density: Min. 0.940 g\/cm3 ISO 1183 – Tensile strength at yield: Min. 20MPa ISO 527 – Elongation at the break: Min 350% ISO 527 – Environmental stress crack resist (F50) Min. 96 hours ISO 4599<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
    \n
    \n\n\n\n\n\n\n\n\n
    \n
    Pos.<\/span><\/div>\n<\/td>\n
    		\n
    Mechanical performance<\/span><\/div>\n<\/td>\n
    		\n
    Test conditions<\/span><\/div>\n<\/td>\n
    		\n
    Performance<\/span><\/div>\n<\/td>\n
    		\n
    Standard<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    \u00c7ekme mukavemeti
    \nat yield<\/span><\/div>\n<\/td>\n
    		\n
    Uzatma oran\u0131:
    \n100 mm\/dk<\/span><\/div>\n<\/td>\n
    		\n
    \u2265620N<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nMethod E1<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    Ezmek<\/span><\/div>\n<\/td>\n
    		\n
    \u00d6rnek uzunlu\u011fu: 250mm
    \nLoad: 380N
    \nDuration of Max. load: 1 minutes
    \n\u0130yile\u015fme s\u00fcresi: 1 saat<\/span><\/div>\n<\/td>\n
    		\n
    The outer and inner diameter shall show, under visual examination without damage and no reduction of diameter greater than 15%.<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nMethod E3<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    Cinsel sapk\u0131nl\u0131k<\/span><\/div>\n<\/td>\n
    		\n
    \u2264120mm<\/span><\/div>\n<\/td>\n
    		\n
    –<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nMethod E10<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    4<\/span><\/div>\n<\/td>\n
    		\n
    Etki<\/span><\/div>\n<\/td>\n
    		\n
    Striking surface radius: 10mm
    \nImpact Energy: 1J
    \nNumber of impact: 3 times
    \n\u0130yile\u015fme s\u00fcresi: 1 saat<\/span><\/div>\n<\/td>\n
    		\n
    Under visual examination, there shall be no damage to the micro duct.<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nMethod E4<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    5<\/span><\/div>\n<\/td>\n
    		\n
    Bend radius<\/span><\/div>\n<\/td>\n
    		\n
    Number of turns: 5
    \nMandrel diameter:144mm.
    \nMumber of cycles: 3<\/span><\/div>\n<\/td>\n
    		\n
    The outer and inner diameter shall show, under visual examination without damage and no reduction of diameter greater than 15%.<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nMethod E11<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
    \n
    \n\n\n\n\n\n\n\n\n
    \n
    Pos.<\/span><\/div>\n<\/td>\n
    		\n
    Item<\/span><\/div>\n<\/td>\n
    		\n
    Specification<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    Appearance<\/span><\/div>\n<\/td>\n
    		\n
    Smooth outer wall (UV-stabilized) without visible impurities; well-proportioned color, no bubbles or cracks; with defined markings
    \non outer wall.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    \u00c7ekme mukavemeti<\/span><\/div>\n<\/td>\n
    		\n
    Use Pull socks to tension a sample in accordance with table below:
    \nSample length: 1m
    \nTensile speed: 20mm\/min
    \nLoad: 6800N
    \nDuration of the tension: 5 min.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    Crush Resistance<\/span><\/div>\n<\/td>\n
    		\n
    A 250mm sample after 1 minute load time and 1 hour recovery time. Load (plate) shall be 2000N. The imprint of the plate on the
    \nsheath is not considered as mechanical damage.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    4<\/span><\/div>\n<\/td>\n
    		\n
    Etki<\/span><\/div>\n<\/td>\n
    		\n
    Striking surface radius shall be 10mm and impact energy 10J. Recovery time shall be one out. The imprint of the striking surface
    \non the microduct is not considered as mechanical damage.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    5<\/span><\/div>\n<\/td>\n
    		\n
    Bend<\/span><\/div>\n<\/td>\n
    		\n
    Diameter of mandrel shall be 40X OD of sample, 4 turns, 3 cycles.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    Completed packages of the HDPE Tube Bundle on drums can be stored outdoor max. 6 months upon the date of production. Storage temperature: -40\u00b0C \uff5e +70\u00b0C Installation temperature: -30\u00b0C \uff5e +50\u00b0C Operating temperature: -40\u00b0C \uff5e +70\u00b0C<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    Essential details<\/div>\n
    \n
    \n
    Model Number:7 Ways 12\/10mm DB Tube Bundle<\/dt>\n<\/dl>\n
    \n
    Type:Tube bundle<\/dt>\n<\/dl>\n
    \n
    Place of Origin:Shanghai, China<\/dt>\n<\/dl>\n
    \n
    ANMASPC<\/dt>\n<\/dl>\n
    \n
    Use:FTTH<\/dt>\n<\/dl>\n
    \n
    Warranty Time:12months<\/dt>\n<\/dl>\n
    \n
    Network:None<\/dt>\n<\/dl>\n
    \n
    Sub duct Inner diameter:10mm<\/dt>\n<\/dl>\n
    \n
    Sub duct outer diameter:12mm<\/dt>\n<\/dl>\n
    \n
    PE Sheath:3.4mm<\/dt>\n<\/dl>\n
    \n
    Outer Diameter::42.8mm (\u00b11.1mm)<\/dt>\n<\/dl>\n
    \n
    Melt flow index:0.1 ~ 0.4 g\/10 minutes<\/dt>\n<\/dl>\n
    \n
    Density:Min. 0.940 g\/cm3<\/dt>\n<\/dl>\n
    \n
    Tensile strength at yield:Min. 20MPa<\/dt>\n<\/dl>\n
    \n
    Elongation at the break:Min 350%<\/dt>\n<\/dl>\n
    \n
    Environmental stress crack resist (F50):Min. 96 hours<\/dt>\n<\/dl>\n
    \n
    Storage temperature:-40\u00b0C ~ +70\u00b0C<\/dt>\n<\/dl>\n<\/div>\n
    Supply Ability\uff1a1000000 Piece\/Pieces per Day<\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

    Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number:7 Ways 12\/10mm DB Tube Bundle Type:Tube bundle Place of Origin:Shanghai, China Brand Name:ANMASPC Use:FTTH Warranty Time:12months Network:None Sub duct Inner diameter:10mm Sub duct outer diameter:12mm PE Sheath:3.4mm Outer Diameter::42.8mm (\u00b11.1mm) Melt flow index:0.1 ~ 0.4 g\/10 minutes Density:Min. 0.940 g\/cm3 Tensile strength at yield:Min. 20MPa Elongation at the break:Min 350% Environmental stress crack resist (F50):Min. 96 hours Storage temperature:-40\u00b0C ~ +70\u00b0C Supply Ability\uff1a1000000 Piece\/Pieces per Day \u00a0 \u00a0 \u00a0 FOB Price: US $0.5 – 9,999 \/ Piece Min.Order Quantity: 100 Piece\/Pieces Supply Ability: 10000 Piece\/Pieces per Month<\/p>","protected":false},"featured_media":303,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-302","product","type-product","status-publish","has-post-thumbnail","product_cat-hdpe-microducts","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/microductconnector.com\/tr\/wp-json\/wp\/v2\/product\/302","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/microductconnector.com\/tr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/microductconnector.com\/tr\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/microductconnector.com\/tr\/wp-json\/wp\/v2\/comments?post=302"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/microductconnector.com\/tr\/wp-json\/wp\/v2\/media\/303"}],"wp:attachment":[{"href":"https:\/\/microductconnector.com\/tr\/wp-json\/wp\/v2\/media?parent=302"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/microductconnector.com\/tr\/wp-json\/wp\/v2\/product_brand?post=302"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/microductconnector.com\/tr\/wp-json\/wp\/v2\/product_cat?post=302"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/microductconnector.com\/tr\/wp-json\/wp\/v2\/product_tag?post=302"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}