Mikro kanal sonlandırma tapaları

Microduct end stops for protecting open telecom tubes

These microduct end stops are presented for terminating open-ended tubes and helping avoid air leakage and the ingress of water or other material.

Supplier data lists transparent push-fit bodies, preassembled safety clips, a maximum working pressure of 25 bar and FPF sizes from 3–20 mm outside diameter. Historic price, MOQ and supply figures are not treated as current commitments.

Key details

							Bileşenler
							1	Kovan (Pens)		POM
							2	Emniyet Klipsi		POM
							3	Kartuş		ÇİNKO ALAŞIMI
							4	Kilit Pençesi		SUS301/304
							5	Destek Halkası		POM
							6	Mühür Yüzüğü		TEP
							7	Gövde		PC2807
Fit Tüpü
Boru malzemesi						HDPE、PE、Nylon、Polyurethane
Borunun dış çapı						Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ16,Φ18,Φ20
Technical Parameter
Akışkanlarla çalışmak						Hava
Gerginlik						0.15~0.8MPa Sızıntı Yok
Çekme testi						400N
Test basıncı						2.5 MPa
Çalışma basıncı aralığı						0~1.6MPa
Ortam sıcaklığı ve akışkan sıcaklığı						-40~60℃
Montaj Sıcaklığı						-10℃/+50℃
Önerilen Üfleme Sıcaklığı						-15℃/+35℃
Koruma derecesi						IP68
UV ışınlarına dayanıklı sınıf						F1
Yerleştirme kuvveti						Maksimum 50N (5kg)
Ömür						25 yıl
Standartlar:						EN 50411-2-8
Teknik Özellikler ve Boyutlar
ANMASPC Kodu						Dış Çap/İç Çap
FPF3						3
FPF4						4
FPF5						5
FPF6						6
FPF7						7
FPF8						8
FPF10						10
FPF12						12
FPF14						14
FPF16						16
FPF18						18
FPF20						20

Specifying an end stop for a telecom tube

Use these checkpoints to prepare a product-specific enquiry and avoid selecting by a general trade name alone.

1. Confirm the tube: Measure the outside diameter and identify the matching FPF version, including the 14 mm option when relevant.
2. State the route condition: Describe the open-tube location, exposure and planned period of closure.
3. Define testing: Provide the required pressure or sealing test rather than relying on a generic end-stop description.
4. Refresh commercial data: Request a current quotation for MOQ, price, packing, capacity and lead time.

OEM ve proje yeteneği

Telekom tedariki konusunda şirket yeteneği

Oulu Automatic Equipment, telekom sağlayıcıları, distribütörler ve OEM ortakları için mikroboru bağlantı parçaları, HDPE mikroboru sistemleri, kablo üfleme aksesuarları ve pnömatik bağlantı parçaları tedarikçisi olarak kendini tanıtıyor.

Şirketin yeteneklerini keşfedin

B2B kaynak bulma desteği

B2B satın alma desteği

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. For a product-specific enquiry, include:

• Measure the outside diameter and identify the matching FPF version, including the 14 mm option when relevant.
• Target quantity by size or model, sample needs, mixed specifications and packing preference.
• Project drawings, pressure or sealing requirements, and required compliance or export documents.
• Current MOQ, payment, freight, sample timing and production timing to be confirmed in the quotation.

Company-level service statements and commercial terms should be reconfirmed for the selected product and order.

Bir ürün bazlı teklif için boyutları, rota koşullarını ve miktarları paylaşın.
Ürün gereksinimlerinizi gönderin

ÜRÜN DETAY GÖRÜNTÜLERİ

Ürün Detayı

SSS

What are microduct end stops used for?

They terminate open telecom tubes and are described as helping reduce air leakage and water or material ingress.

What are the standard sizes of microducts?

Microduct sizes vary. This end-stop family publishes FPF3–FPF20 versions for 3–20 mm outside diameter.

Is there a 14 mm microduct end stop?

The published range includes an FPF14 version for a 14 mm outside diameter. Confirm the measured tube and dimensional drawing before ordering.

How are push-fit tube end stops secured?

The supplier describes a push-fit construction with a preassembled safety clip. Confirm insertion and removal instructions for the selected size.

What pressure can these micro duct end stops handle?

The supplier publishes a maximum working pressure of 25 bar. Confirm the relevant test conditions for the installation.

Are the listed MOQ and price still valid?

Historic commercial figures appear in the source content, but they are not presented as current commitments. Request a current quotation for price, MOQ, capacity and lead time.