Zinc alloy straight connector with a transparent microduct body
This zinc alloy straight connector is presented for joining compatible microducts in a continuous telecom duct route.
Supplier data describes a transparent body for checking tube position, pre-installed tamper-evident safety clips, push-fit assembly and a maximum working pressure of 25 bar. EN 50411-2-8 compliance is supplier-stated and should be supported by current documentation when required.
Key details
Бүтцийн хэсгүүд
1
Коллет
Пом
2
Хаагч хавчаар
Пом
3
Патрон
Цинкийн хайлш
4
Хаагч хумс
SUS301/304
5
Дэмжих бөгж
Пом
6
Хаалтны бөгж
TEP
7
Бие
PC2807
Фит Туб
Хоолойн материал
HDPE、PE、Nylon、Polyurethane
Хоолойн гадна диаметр
Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ14,Φ16
Technical Parameter
Шингэнтэй ажиллах
Агаар
Хүчтэй чангарал
0.15~0.8 МПа, алдагдалгүй
Түлхэх туршилт
400N
Баталгаажуулалтын даралт
2.5 МПа
Ажиллах даралтын хүрээ
0~1.6 МПа
Агаар орчны температур ба шингэний температур
-40~60℃
Суурилуулалтын температур
-10℃/+50℃
Зөвлөсөн үлээх температур
-15℃/+35℃
Хамгаалалтын зэрэг
IP68
Хэт ягаан туяанд тэсвэртэй зэрэг
F1
Шургуулах хүч
50N ихдэл (5 кг)
Насжилийн хугацаа:
Хорин таван жил
Стандартууд:
EN 50411-2-8
Техникийн үзүүлэлтүүд ба хэмжээсүүд
АНМАСПСК код
Хоолойн гадна диаметр/дотор диаметр
Хоолойн гадна диаметр/дотор диаметр
Шахуургасан нүх
FPU3/2.1
3/2.1
3/2.1
2.1
FPU4/2.5
4/2.5
4/2.5
2.5
FPU4/2.8
4/2.8
4/2.8
2.8
FPU5/2.1
5/2.1
5/2.1
2.1
FPU5/3.5
5/3.5
5/3.5
3.5
FPU6/4
6/4
6/4
4
FPU7/3.5
7/3.5
7/3.5
3.5
FPU7/4
7/4
7/4
4
FPU7/5.5
7/5.5
7/5.5
5.5
FPU8/3.5
8/3.5
8/3.5
3.5
FPU8/6
8/6
8/6
6
FPU10/6
10/6
10/6
6
FPU10/8
10/8
10/8
8
FPU12/8
12/8
12/8
8
FPU12/10
12/10
12/10
10
FPU14/10
14/10
14/10
10
FPU14/12
14/12
14/12
12
FPU16/12
16/12
16/12
12
FPU16/13
16/13
16/13
13
FPU16/14
16/14
16/14
14
Overall Dimensions
Загвар
A
B
C
D
E
F
FPU03
31.9
6.9
10
11.1
3.2
2.1
FPU04
31.9
6.9
10
11.1
4.2
2.8/2.5
FPU05
35.4
8.9
12
12.8
5.2
3.5/2.1
FPU06
35.4
8.9
12
12.8
6.2
4.0
FPU07
41.0
11.5
14.1
15.4
7.2
5.5/4/3.5
FPU08
41.0
11.5
14.1
15.4
8.2
6/3.5
FPU10
42.0
14.0
17.5
18.3
10.2
08/06
FPU12
49.5
15.8
19.2
20.7
12.2
10/08
FPU14
50.5
18.0
22.2
23
14.3
12/10
FPU16
55.0
20.0
24.7
25.1
16.2
14/13/12
Confirming a straight microduct joint
Use these checkpoints to prepare a product-specific enquiry and avoid selecting by a general trade name alone.
Match the tube pair: Provide the outside and inside diameter of both microducts and confirm that the selected FPU version matches them.
Check the route condition: State tube material, installation environment and the planned cable-blowing conditions.
Set test requirements: Confirm operating pressure, proof test, pull requirement and any environmental specification.
Request evidence: Ask for the drawing and current documentation supporting the quoted connector and any required standard claim.
OEM & PROJECT CAPABILITY
Company capability for telecom supply
Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.
The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. For a product-specific enquiry, include:
Provide the outside and inside diameter of both microducts and confirm that the selected FPU version matches them.
Target quantity by size or model, sample needs, mixed specifications and packing preference.
Project drawings, pressure or sealing requirements, and required compliance or export documents.
Current MOQ, payment, freight, sample timing and production timing to be confirmed in the quotation.
Company-level service statements and commercial terms should be reconfirmed for the selected product and order.
Share dimensions, route conditions and quantities for a product-specific quotation. Send product requirements
PROJECT SUPPORT
Plan the microduct connection or sealing point
Review the microduct route solutions page and the supplier’s Үйлчилгээ page for project-support context. Confirm the exact product fit, documents and commercial terms in the quotation.
It creates a straight joint between two compatible microduct sections so the telecom duct route can continue through the connection.
What are the standard sizes of microducts?
Microduct sizes vary by system. The source lists several FPU versions, so confirm both outside and inside diameter against the exact article code.
Why is a straight microduct connector transparent?
The supplier states that the transparent body allows the tube position inside the joint to be checked visually.
How do push-fit microduct connectors lock?
This connector uses a push-fit arrangement with pre-installed safety clips. Follow the confirmed tube preparation and insertion procedure for the selected size.
What pressure can this microduct connector handle?
The supplier publishes a maximum working pressure of 25 bar. Confirm the operating and proof-test conditions for the actual route.
Does this connector comply with EN 50411-2-8?
The supplier page states EN 50411-2-8 compliance, but a current certificate or test report was not independently verified. Request the applicable document if it is required.
