아연 합금 리듀서 커넥터

Zinc alloy microduct reducer connector for diameter transitions

This microduct reducer connector is designed to join two microducts with different outside diameters, including a typical direct-buried to direct-install transition entering a building.

Supplier data lists push-fit assembly, included safety clips and a maximum working pressure of 25 bar. Confirm the exact FPG size pair and project pressure test before ordering.

Key details

Selecting a reducing microduct coupler

Use these checkpoints to prepare a product-specific enquiry and avoid selecting by a general trade name alone.

1. Measure both tubes: Provide the outside and inside diameter for the larger and smaller microduct; do not select from outside diameter alone.
2. Identify the transition: State whether the joint moves from direct-buried to direct-install duct or serves another network transition.
3. Confirm pressure conditions: Compare the supplier-stated 25 bar maximum with the project’s operating and proof-test requirements.
4. Request the exact code: Ask Oulu to confirm the matching FPG article code, dimensional drawing, quantity and documentation.

OEM & PROJECT CAPABILITY

Company capability for telecom supply

Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.

Explore company capabilities

B2B SOURCING SUPPORT

B2B purchasing support

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. For a product-specific enquiry, include:

• Provide the outside and inside diameter for the larger and smaller microduct; do not select from outside diameter alone.
• Target quantity by size or model, sample needs, mixed specifications and packing preference.
• Project drawings, pressure or sealing requirements, and required compliance or export documents.
• Current MOQ, payment, freight, sample timing and production timing to be confirmed in the quotation.

Company-level service statements and commercial terms should be reconfirmed for the selected product and order.

Share dimensions, route conditions and quantities for a product-specific quotation.
Send product requirements

PRODUCT DETAIL IMAGES

Product Detail

자주 묻는 질문

What is a microduct reducer connector used for?

It joins two microducts with different outside diameters, such as a direct-buried duct transitioning to a smaller direct-install duct at a building entry.

How do I choose the correct reducer connector size?

Send the measured outside and inside diameter of both tubes and request the matching FPG article code and drawing.

Can a reducing microduct connector join ducts with different wall thicknesses?

It may be possible when both outside and inside dimensions match a published size pair. Confirm the exact combination rather than relying on nominal size.

How is this microduct reducer installed?

The supplier describes push-fit technology with safety clips. Confirm tube cutting, insertion depth, clip engagement and leak-test procedure for the project.

What is the pressure rating of the zinc alloy reducer connector?

The supplier publishes a maximum working pressure of 25 bar. Confirm operating conditions, proof test and safety margin for the installation.

What information should a B2B reducer connector enquiry include?

Include both tube dimensions, material, route transition, pressure requirement, quantity, packing and required drawings or compliance documents.