[카테고리:] <span>업계 인사이트</span>

Distinguish optical connectors from microduct couplers. Match duct OD, bore, cable clearance and documented blowing limits before ordering a duct joint.

Inspect PU air hoses for wear, leaks, kinks and exposure damage. Plan replacement, confirm fitting compatibility and verify the repair under machine load.

Assess PU tubing for oil, water and chemical exposure using polymer grade, temperature, concentration and seal compatibility, with a practical enquiry checklist.

Trace low airflow through steel tube connectors with pressure checks under load, route inspection and controlled isolation before replacing sound components.

Specify steel fittings for pneumatic maintenance by interface, airflow, access and replacement procedure. Separate push-in tube fittings from rigid pipe joints.

Compare polyurethane and nylon pneumatic tubing by flexibility, working limits, bore size and media exposure. Match the tube to your metal fitting series.

Install metal push-in fittings with matched tubing, clean square cuts, verified insertion and supported routing. Learn how to inspect and test connections.

Find brass fitting air leaks with six checks covering leak location, tubing, insertion, thread seals, side load and working conditions before replacing parts.

두 끝 사이즈, 연결 방식, 밀봉 재질 및 용도에 따라 스테인리스 스틸 저압 밸브를 선택하세요. 등급, 나사 종류 및 압력 온도 제한 사항을 비교하세요.

Clean and maintain stainless steel air fittings with a controlled isolation, inspection and retest process. Check tubing, threads, seals and cleaning limits.