{"id":3829,"date":"2026-01-07T10:00:00","date_gmt":"2026-01-07T10:00:00","guid":{"rendered":"https:\/\/microductconnector.com\/blog\/the-difference-between-pu-air-hose-and-pa-air-hose\/"},"modified":"2026-10-23T09:43:53","modified_gmt":"2026-10-23T09:43:53","slug":"the-difference-between-pu-air-hose-and-pa-air-hose","status":"publish","type":"post","link":"https:\/\/microductconnector.com\/ja\/blog\/the-difference-between-pu-air-hose-and-pa-air-hose\/","title":{"rendered":"The difference between PU Air hose and PA Air hose"},"content":{"rendered":"
\n

PU hose and PA hose are two popular types of hoses used for various applications. While both serve the purpose of fluid or air transfer, they have some distinct differences in terms of their properties and performance.<\/span><\/p>\n

How do flexibility and service conditions affect PU and PA hose?<\/h2>\n

One noticeable difference between PU hose and PA hose is their hardness. PU hoses are softer compared to their PA counterparts. This softness makes PU hoses more flexible and easier to maneuver, allowing for easy installation and use in tight spaces. On the other hand, PA hoses have a higher hardness, which makes them more rigid and less flexible.<\/span><\/p>\n

\"Inspection<\/figure>\n

Another significant difference between PU hose and PA hose relates to their temperature and pressure resistance. PA hoses have better high temperature and pressure resistance compared to PU tubes. This makes them suitable for applications where the transfer of hot fluids or gases is involved, as well as for high-pressure systems. On the contrary, PU hoses are not as resistant to high temperatures and pressures, limiting their use in such conditions.<\/span><\/p>\n

PU hoses are known for their excellent abrasion resistance. They can withstand wear and tear, making them ideal for applications where the hose comes into contact with rough surfaces or experiences frequent movement. This property of PU hoses ensures their durability and longer lifespan, giving them an edge over PA hoses in terms of longevity.<\/span><\/p>\n

In terms of chemical resistance, both PU and PA hoses exhibit good resistance to a wide range of chemicals. They can withstand exposure to oils, solvents, acids, and alkalis, making them suitable for various industrial applications. However, it is important to note that the specific resistance to certain chemicals may vary depending on the formulation of the hose, so it is crucial to choose the right type of hose for the intended application.<\/span><\/p>\n

When it comes to cost-effectiveness, PU hoses tend to be more affordable compared to PA hoses. This makes them a popular choice for applications where budget constraints are a concern. Additionally, PU hoses are relatively lightweight, which makes handling and transportation easier and more convenient.<\/span><\/p>\n

In summary, the difference between PU hose and PA hose lies in their hardness, temperature and pressure resistance, abrasion resistance, chemical resistance, and cost-effectiveness. PU hoses are softer, more flexible, and offer excellent abrasion resistance, while PA hoses have better high temperature and pressure resistance. The choice between the two depends on the specific requirements of the application, such as the temperature, pressure, and the nature of the fluid or gas being transferred.<\/span><\/p>\n

\n

\n

How should PU and PA hose be compared at the actual operating temperature?<\/h2>\n

PU hose<\/strong>, PA hose<\/strong> and the selected fitting system<\/strong> should be specified together. Current engineering guidance puts the emphasis on the actual duty cycle: tube OD and wall, bend radius, movement, temperature, medium and the pressure value at that temperature. PU and PA are useful candidates in different conditions, but neither material label is a universal rating.<\/p>\n\n\n\n\n\n\n\n
Check before approval<\/th>\n\u8981\u6c42\u3059\u308b\u8a3c\u62e0<\/th>\n<\/tr>\n<\/thead>\n
Pressure and temperature<\/td>\nWorking rating for the exact size, with derating or temperature limits.<\/td>\n<\/tr>\n
Media exposure<\/td>\nCompatibility chart for the actual fluid, concentration and exposure time.<\/td>\n<\/tr>\n
Motion and assembly<\/td>\nBend radius, abrasion guidance, tube tolerance and approved connector series.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Record these fields in the RFQ and link the chosen tube to the site’s pneumatic parts<\/a> range. Avoid using burst or test pressure as a continuous operating value.<\/p>\n

The practical PU-versus-PA decision starts with temperature, pressure and movement at the same time. Festo describes its standard polyamide PAN tubing with a pressure range that varies by product and notes that polyurethane and polyamide have different chemical and handling behaviour. That is useful selection context, not a universal rating for every compound. Record the exact tube code, outside diameter, wall, temperature and pressure condition in the purchase request.<\/p>\n\n\n\n\n\n\n\n\n
Duty question<\/th>\nPU is often investigated when…<\/th>\nPA is often investigated when…<\/th>\n<\/tr>\n<\/thead>\n
Routing and motion<\/td>\nFlexibility, compact routing or repeated movement dominate<\/td>\nDimensional stability and a firmer route are useful<\/td>\n<\/tr>\n
Heat and pressure<\/td>\nThe exact series confirms the operating envelope<\/td>\nThe exact series offers the required temperature or pressure margin<\/td>\n<\/tr>\n
Media<\/td>\nThe formulation is documented for the actual medium<\/td>\nThe formulation is documented for oil, fuel or other specified media<\/td>\n<\/tr>\n
Connector fit<\/td>\nOD, wall and hardness match the fitting drawing<\/td>\nOD, wall and hardness match the fitting drawing<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Do not copy a burst value into the working-pressure field. Ratings can change with diameter, wall, temperature, pulsation and the fitting used at each end. A tube may also be chemically compatible in a static chart but fail after repeated exposure, cleaning or flexing. Where the line moves, keep the first bend supported and check abrasion at guides and clamps. Where it is heated, confirm the rating at the actual ambient and medium temperature.<\/p>\n

Use a small qualification sample before standardizing a replacement. Measure the tube, assemble the proposed pneumatic fitting system<\/a>, pressurize within the approved window, and inspect retention and leaks after the representative cycle. Keep the sample ID and test condition with the data sheet. For maintenance teams, the pneumatic maintenance guide<\/a> provides a related inspection path.<\/p>\n

How do fittings, movement and support affect the hose choice?<\/h2>\n

The tube is only one part of a pneumatic boundary. A flexible PU tube can be damaged by a sharp panel edge, while a stiffer PA tube can transfer side load to a push-in fitting if the route has no support. Check the first bend, clamp spacing, release-ring access and the tube end after a representative cycle. If the fitting seal is compatible but the tube is oval or scored, replacing the connector alone may not solve the leak. Add the hose, connector and support method to the same approved drawing.<\/p>\n

\"Visible<\/figure>\n

For a repeat order, record colour and marking only as identification fields; they do not prove material or pressure. Ask for the current data sheet and use the exact part number in the maintenance store.<\/p>\n

How should a PU or PA replacement hose be approved?<\/h2>\n

Start with the installed duty rather than assuming that the old hose material is the correct specification. Note where the tube moves, where it rubs against adjacent equipment and where heat or cleaning fluid reaches it. Separate those observations from the nominal material name. A hose selected for a stationary cabinet line may face a different combination of bend, vibration and access requirements when moved onto an actuator.<\/p>\n

The hose replacement specification<\/strong> should identify the exact supplier part, outside diameter, wall or inside diameter, medium, operating temperature and pressure, fitting interface and route support. Keep the current product data with the order. When comparing alternatives, ask whether both ratings describe the same size and operating condition; a higher catalogue value for another diameter does not settle the choice. Also check whether the proposed fitting accepts the selected tube material and tolerance.<\/p>\n

Use a representative assembly to review access, bending and the agreed leak-check method before changing a complete machine. Record the tube and fitting codes together, inspect the cut end and insertion, and confirm that the line can move without being stretched or pinched. If the service later changes, reopen the comparison instead of treating the original PU-versus-PA decision as permanent. Keep colour and printed markings as identification aids, alongside the technical specification rather than in place of it.<\/p>\n

\u95a2\u9023\u5546\u54c1\uff1a \u7a7a\u5727\u90e8\u54c1<\/a> | \u88fd\u54c1\u30e9\u30a4\u30f3\u30ca\u30c3\u30d7<\/a> | \u30a8\u30f3\u30b8\u30cb\u30a2\u30ea\u30f3\u30b0\u30c1\u30fc\u30e0\u306b\u9023\u7d61\u3057\u3066\u304f\u3060\u3055\u3044<\/a><\/p>\n

\u3088\u304f\u3042\u308b\u8cea\u554f<\/h2>\n

Can a nominally matching fitting be used for either hose?<\/h3>\n

Only when the supplier approves the material, OD, wall and tolerance for the exact fitting. A matching nominal size is not enough.<\/p>\n

What is the safest way to compare price?<\/h3>\n

Compare the same duty cycle, replacement interval, fitting family and test requirement; a lower unit price can be offset by early leaks or rework.<\/p>\n

Which current source should a buyer keep with the order?<\/h3>\n

Keep the exact tube datasheet and compatibility chart, plus the fitting drawing and assembly instruction. Parker’s technical catalogue is useful context, but it does not rate every supplier’s tube.<\/p>\n

Which hose is more flexible, PU or PA?<\/h3>\n

PU is commonly chosen for flexibility, but the actual bend radius depends on tube size, reinforcement, temperature and the manufacturer’s data.<\/p>\n

Is PA always better for high pressure?<\/h3>\n

PA often has higher stiffness and may suit demanding pressure conditions, but only the exact size and rating can answer the question.<\/p>\n

Which hose resists abrasion better?<\/h3>\n

PU is frequently considered for moving or rubbing applications, yet verify the abrasion method and service conditions rather than relying on a generic material claim.<\/p>\n

How should chemical compatibility be checked?<\/h3>\n

Identify the actual fluid, concentration, temperature and exposure time, then consult the tube supplier’s compatibility chart.<\/p>\n

What should be recorded when ordering replacement hose?<\/h3>\n

Record material, OD, wall, colour, pressure and temperature conditions, medium, bend or motion requirement, length and fitting code.<\/p>\n

Is PU automatically unsuitable for water?<\/h3>\n

No universal answer is safe. Water chemistry, temperature and the exact PU formulation matter; use the supplier compatibility table for the named tube.<\/p>\n

Can PA pressure data be transferred to a different diameter?<\/h3>\n

No. Pressure values are size- and condition-specific. Confirm the exact tube code and temperature derating before approval.<\/p>\n

\u53c2\u8003\u6587\u732e<\/h2>\n