KEZAシリーズ ロック式ダクトシールスリーブ スピードパイプ 0.5bar気密シール

KEZA lock-type duct sealing sleeve for unused speedpipe

The KEZA duct sealing sleeve is presented for closing unused speedpipe microducts and provides supplier-stated airtight sealing up to 0.5 bar.

Its quick-lock structure and permanent customer address marking are intended to support field fitting and site traceability. The supplier also states protection against water, dust and pests.

Key details

Planning a speedpipe end-sealing point

Use these checkpoints to prepare a product-specific enquiry and avoid selecting by a general trade name alone.

1. Confirm the duct is unused: The published use is for an unused speedpipe; do not assume suitability around an installed cable.
2. Provide the dimensions: Send the speedpipe outside and inside diameter and the required sealing position.
3. State the test requirement: The supplier publishes up to 0.5 bar; confirm the project test method and acceptance criteria.
4. Set the marking information: Include the address or route identification needed for permanent field marking.

OEM & PROJECT CAPABILITY

Company capability for telecom supply

Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.

Explore company capabilities

B2B SOURCING SUPPORT

B2B purchasing support

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. For a product-specific enquiry, include:

• The published use is for an unused speedpipe; do not assume suitability around an installed cable.
• Target quantity by size or model, sample needs, mixed specifications and packing preference.
• Project drawings, pressure or sealing requirements, and required compliance or export documents.
• Current MOQ, payment, freight, sample timing and production timing to be confirmed in the quotation.

Company-level service statements and commercial terms should be reconfirmed for the selected product and order.

Share dimensions, route conditions and quantities for a product-specific quotation.
Send product requirements

よくある質問

What is the purpose of a duct sleeve?

For this product, the sleeve is intended to close an unused speedpipe microduct and help protect the opening from water, dust and pests.

What is a microduct used for?

A microduct provides a protected pathway for telecom or fiber cable. This KEZA sleeve is specified for a speedpipe pathway that is currently unused.

What does the 0.5 bar rating mean for this sealing sleeve?

It is the supplier-stated airtight sealing level for the KEZA sleeve. Request the applicable test method and confirm it matches the project requirement.

Can this duct sealing sleeve be used on a cable-filled microduct?

The page identifies the product for unused speedpipe microducts. A cable-filled condition requires a separately confirmed sealing solution.

How does permanent address marking help in a duct network?

It can support site identification and traceability at the sealed endpoint. Provide the required address or route coding with the enquiry.

What should be confirmed before ordering a speedpipe microduct seal?

Confirm duct dimensions, unused status, sealing test, marking content, quantity, packing, documents and current delivery timing.