{"id":302,"date":"2026-08-24T11:30:52","date_gmt":"2026-08-24T03:30:52","guid":{"rendered":"https:\/\/microductconnector.com\/product\/7-ways-1210-mm-with-pe-sheath-3-4mm-direct-buried-db-hdpe-micro-duct-tube-bundle-for-air-blowing-cable-installation-project-product\/"},"modified":"2026-09-03T09:33:38","modified_gmt":"2026-09-03T09:33:38","slug":"7-ways-1210-mm-with-pe-sheath-3-4mm-direct-buried-db-hdpe-micro-duct-tube-bundle-for-air-blowing-cable-installation-project-product","status":"publish","type":"product","link":"https:\/\/microductconnector.com\/fr\/product\/7-ways-1210-mm-with-pe-sheath-3-4mm-direct-buried-db-hdpe-micro-duct-tube-bundle-for-air-blowing-cable-installation-project-product\/","title":{"rendered":"7 fa\u00e7ons de proc\u00e9der avec le tube PEHD DB 12\/10 mm"},"content":{"rendered":"

D\u00e9tails du produit<\/h2>\n

\tZhejiang Oulu Automatic Equipment Co., Ltd.<\/span><\/p>\n

Br\u00e8ve description :<\/h3>\n
\n
D\u00e9tails essentiels<\/div>\n
\n
\n
Num\u00e9ro de mod\u00e8le : Faisceau de tubes DB 7 voies 12\/10 mm<\/dt>\n<\/dl>\n
\n
Faisceau tubulaire<\/dt>\n<\/dl>\n
\n
Lieu d'origine : Shanghai, Chine<\/dt>\n<\/dl>\n
\n
ANMASPC<\/dt>\n<\/dl>\n
\n
Utiliser : FTTH<\/dt>\n<\/dl>\n
\n
Dur\u00e9e de garantie : 12 mois<\/dt>\n<\/dl>\n
\n
R\u00e9seau : Aucun<\/dt>\n<\/dl>\n
\n
Diam\u00e8tre int\u00e9rieur du sous-conduit : 10 mm<\/dt>\n<\/dl>\n
\n
Diam\u00e8tre ext\u00e9rieur du sous-conduit : 12 mm<\/dt>\n<\/dl>\n
\n
Gaine en PE : 3,4 mm<\/dt>\n<\/dl>\n
\n
Outer Diameter::42.8mm (\u00b11.1mm)<\/dt>\n<\/dl>\n
\n
Indice de fluidit\u00e9 \u00e0 chaud : 0,1 ~ 0,4 g\/10 minutes<\/dt>\n<\/dl>\n
\n
Densit\u00e9 : min. 0,940 g\/cm3<\/dt>\n<\/dl>\n
\n
R\u00e9sistance \u00e0 la traction au seuil d'\u00e9coulement : Min. 20 MPa<\/dt>\n<\/dl>\n
\n
Allongement \u00e0 la rupture : Min 350%<\/dt>\n<\/dl>\n
\n
R\u00e9sistance \u00e0 la fissuration sous contrainte environnementale (F50) : min. 96 heures<\/dt>\n<\/dl>\n
\n
Storage temperature:-40\u00b0C ~ +70\u00b0C<\/dt>\n<\/dl>\n<\/div>\n
\n
Supply Ability\uff1a1000000 Piece\/Pieces per Day<\/div>\n<\/div>\n

\u00a0<\/p>\n

\u00a0<\/p>\n

\u00a0<\/p>\n<\/p>\n<\/div>\n

<\/p>\n

  • \nPrix FAB <\/em> US $0.5 – 9,999 \/ Piece <\/li>\n
  • \nQuantit\u00e9 min. de commande : <\/em> 100 Pi\u00e8ces<\/li>\n
  • \nCapacit\u00e9 d'approvisionnement : <\/em> 10000 Pi\u00e8ce\/Pi\u00e8ces par mois<\/li>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n<\/div><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n\t\t\t\t\"7\n<\/div>\n<\/p><\/div>\n<\/div>\n

    7 FA\u00c7ONS<\/span><\/h3>\n
    \n
    \n
    \n
    \n
    \n
    \n
    Un faisceau de micro-tubes ou mini-tubes (\u00e0 paroi d'\u00e9paisseur standard) est entour\u00e9 d'une double gaine en PEHD. Cette conception rend les assemblages de conduites adapt\u00e9s \u00e0 une application d'enfouissement direct en ext\u00e9rieur. Les micro-conduits int\u00e9rieurs sont optimis\u00e9s pour offrir les meilleures performances de soufflage de c\u00e2bles.<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
    \n
    \n
    \n

    Mati\u00e8res premi\u00e8res<\/span><\/h3>\n
    \n
    \n
    HDPE of a high-molecular type with the following parameters is used for production of the Tube Bundle: – Melt flow index: 0.1 \uff5e 0.4 g\/10 minutes EN ISO 1133 – Density: Min. 0.940 g\/cm3 ISO 1183 – Tensile strength at yield: Min. 20MPa ISO 527 – Elongation at the break: Min 350% ISO 527 – Environmental stress crack resist (F50) Min. 96 hours ISO 4599<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
    \n
    \n\n\n\n\n\n\n\n\n
    \n
    Pos.<\/span><\/div>\n<\/td>\n
    		\n
    Performance m\u00e9canique<\/span><\/div>\n<\/td>\n
    		\n
    Conditions d'essai<\/span><\/div>\n<\/td>\n
    		\n
    Performance<\/span><\/div>\n<\/td>\n
    		\n
    Standard<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    R\u00e9sistance \u00e0 la traction
    \n\u00e0 l'intersection<\/span><\/div>\n<\/td>\n
    		\n
    Taux d'extension :
    \n100 mm\/min<\/span><\/div>\n<\/td>\n
    		\n
    \u2265620N<\/span><\/div>\n<\/td>\n
    		\n
    CEI 60794-1-2
    \nM\u00e9thode E1<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    Broyer<\/span><\/div>\n<\/td>\n
    		\n
    Longueur de l'\u00e9chantillon : 250 mm
    \nCharge : 380 N
    \nDur\u00e9e de la charge max. : 1 minute
    \nTemps de r\u00e9cup\u00e9ration : 1 heure<\/span><\/div>\n<\/td>\n
    		\n
    Les diam\u00e8tres ext\u00e9rieur et int\u00e9rieur doivent, lors d'un examen visuel, ne pr\u00e9senter aucun dommage ni aucune r\u00e9duction de diam\u00e8tre sup\u00e9rieure \u00e0 15%.<\/span><\/div>\n<\/td>\n
    		\n
    CEI 60794-1-2
    \nM\u00e9thode E3<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    Paraphilie<\/span><\/div>\n<\/td>\n
    		\n
    \u2264120mm<\/span><\/div>\n<\/td>\n
    		\n
    –<\/span><\/div>\n<\/td>\n
    		\n
    CEI 60794-1-2
    \nM\u00e9thode E10<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    4<\/span><\/div>\n<\/td>\n
    		\n
    Impact<\/span><\/div>\n<\/td>\n
    		\n
    Rayon de la surface de frappe : 10 mm
    \n\u00c9nergie d'impact : 1J
    \nNombre d'impacts : 3 fois
    \nTemps de r\u00e9cup\u00e9ration : 1 heure<\/span><\/div>\n<\/td>\n
    		\n
    Apr\u00e8s examen visuel, il ne doit y avoir aucun dommage sur le micro-conduit.<\/span><\/div>\n<\/td>\n
    		\n
    CEI 60794-1-2
    \nM\u00e9thode E4<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    5<\/span><\/div>\n<\/td>\n
    		\n
    Rayon de courbure<\/span><\/div>\n<\/td>\n
    		\n
    Nombre de tours : 5
    \nDiam\u00e8tre du mandrin : 144 mm.
    \nNombre de cycles : 3<\/span><\/div>\n<\/td>\n
    		\n
    Les diam\u00e8tres ext\u00e9rieur et int\u00e9rieur doivent, lors d'un examen visuel, ne pr\u00e9senter aucun dommage ni aucune r\u00e9duction de diam\u00e8tre sup\u00e9rieure \u00e0 15%.<\/span><\/div>\n<\/td>\n
    		\n
    CEI 60794-1-2
    \nM\u00e9thode E11<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
    \n
    \n\n\n\n\n\n\n\n\n
    \n
    Pos.<\/span><\/div>\n<\/td>\n
    		\n
    Article<\/span><\/div>\n<\/td>\n
    		\n
    Sp\u00e9cification<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    Apparence<\/span><\/div>\n<\/td>\n
    		\n
    Smooth outer wall (UV-stabilized) without visible impurities; well-proportioned color, no bubbles or cracks; with defined markings
    \non outer wall.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    R\u00e9sistance \u00e0 la traction<\/span><\/div>\n<\/td>\n
    		\n
    Use Pull socks to tension a sample in accordance with table below:
    \nSample length: 1m
    \nTensile speed: 20mm\/min
    \nLoad: 6800N
    \nDuration of the tension: 5 min.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    Crush Resistance<\/span><\/div>\n<\/td>\n
    		\n
    A 250mm sample after 1 minute load time and 1 hour recovery time. Load (plate) shall be 2000N. The imprint of the plate on the
    \nsheath is not considered as mechanical damage.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    4<\/span><\/div>\n<\/td>\n
    		\n
    Impact<\/span><\/div>\n<\/td>\n
    		\n
    Striking surface radius shall be 10mm and impact energy 10J. Recovery time shall be one out. The imprint of the striking surface
    \non the microduct is not considered as mechanical damage.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    5<\/span><\/div>\n<\/td>\n
    		\n
    Bend<\/span><\/div>\n<\/td>\n
    		\n
    Diameter of mandrel shall be 40X OD of sample, 4 turns, 3 cycles.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    Completed packages of the HDPE Tube Bundle on drums can be stored outdoor max. 6 months upon the date of production. Storage temperature: -40\u00b0C \uff5e +70\u00b0C Installation temperature: -30\u00b0C \uff5e +50\u00b0C Operating temperature: -40\u00b0C \uff5e +70\u00b0C<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    D\u00e9tails essentiels<\/div>\n
    \n
    \n
    Num\u00e9ro de mod\u00e8le : Faisceau de tubes DB 7 voies 12\/10 mm<\/dt>\n<\/dl>\n
    \n
    Faisceau tubulaire<\/dt>\n<\/dl>\n
    \n
    Lieu d'origine : Shanghai, Chine<\/dt>\n<\/dl>\n
    \n
    ANMASPC<\/dt>\n<\/dl>\n
    \n
    Utiliser : FTTH<\/dt>\n<\/dl>\n
    \n
    Dur\u00e9e de garantie : 12 mois<\/dt>\n<\/dl>\n
    \n
    R\u00e9seau : Aucun<\/dt>\n<\/dl>\n
    \n
    Diam\u00e8tre int\u00e9rieur du sous-conduit : 10 mm<\/dt>\n<\/dl>\n
    \n
    Diam\u00e8tre ext\u00e9rieur du sous-conduit : 12 mm<\/dt>\n<\/dl>\n
    \n
    Gaine en PE : 3,4 mm<\/dt>\n<\/dl>\n
    \n
    Outer Diameter::42.8mm (\u00b11.1mm)<\/dt>\n<\/dl>\n
    \n
    Indice de fluidit\u00e9 \u00e0 chaud : 0,1 ~ 0,4 g\/10 minutes<\/dt>\n<\/dl>\n
    \n
    Densit\u00e9 : min. 0,940 g\/cm3<\/dt>\n<\/dl>\n
    \n
    R\u00e9sistance \u00e0 la traction au seuil d'\u00e9coulement : Min. 20 MPa<\/dt>\n<\/dl>\n
    \n
    Allongement \u00e0 la rupture : Min 350%<\/dt>\n<\/dl>\n
    \n
    R\u00e9sistance \u00e0 la fissuration sous contrainte environnementale (F50) : min. 96 heures<\/dt>\n<\/dl>\n
    \n
    Storage temperature:-40\u00b0C ~ +70\u00b0C<\/dt>\n<\/dl>\n<\/div>\n
    Supply Ability\uff1a1000000 Piece\/Pieces per Day<\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

    Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number:7 Ways 12\/10mm DB Tube Bundle Type:Tube bundle Place of Origin:Shanghai, China Brand Name:ANMASPC Use:FTTH Warranty Time:12months Network:None Sub duct Inner diameter:10mm Sub duct outer diameter:12mm PE Sheath:3.4mm Outer Diameter::42.8mm (\u00b11.1mm) Melt flow index:0.1 ~ 0.4 g\/10 minutes Density:Min. 0.940 g\/cm3 Tensile strength at yield:Min. 20MPa Elongation at the break:Min 350% Environmental stress crack resist (F50):Min. 96 hours Storage temperature:-40\u00b0C ~ +70\u00b0C Supply Ability\uff1a1000000 Piece\/Pieces per Day \u00a0 \u00a0 \u00a0 FOB Price: US $0.5 – 9,999 \/ Piece Min.Order Quantity: 100 Piece\/Pieces Supply Ability: 10000 Piece\/Pieces per Month<\/p>","protected":false},"featured_media":303,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-302","product","type-product","status-publish","has-post-thumbnail","product_cat-hdpe-microducts","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/product\/302","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/comments?post=302"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/media\/303"}],"wp:attachment":[{"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/media?parent=302"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/product_brand?post=302"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/product_cat?post=302"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/product_tag?post=302"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}