{"id":1280,"date":"2026-08-24T11:42:49","date_gmt":"2026-08-24T03:42:49","guid":{"rendered":"https:\/\/microductconnector.com\/product\/hdpe-pipe-tube-bundle-db-series-2ways-1410mm-with-pe-sheath-1-2mm-for-fiber-optic-air-blowing-cable-install-underground-product\/"},"modified":"2026-09-03T09:31:11","modified_gmt":"2026-09-03T09:31:11","slug":"hdpe-pipe-tube-bundle-db-series-2ways-1410mm-with-pe-sheath-1-2mm-for-fiber-optic-air-blowing-cable-install-underground-product","status":"publish","type":"product","link":"https:\/\/microductconnector.com\/fr\/product\/hdpe-pipe-tube-bundle-db-series-2ways-1410mm-with-pe-sheath-1-2mm-for-fiber-optic-air-blowing-cable-install-underground-product\/","title":{"rendered":"HDPE Pipe Tube 2ways 14\/10mm"},"content":{"rendered":"

D\u00e9tails du produit<\/h2>\n

\tZhejiang Oulu Automatic Equipment Co., Ltd.<\/span><\/p>\n

Br\u00e8ve description :<\/h3>\n
\n

D\u00e9tails essentiels<\/p>\n

\n
\n
Model Number:2ways 14\/10mm DB Tube Bundle<\/dt>\n<\/dl>\n
\n
Type : Microconduit et faisceau de tubes<\/dt>\n<\/dl>\n
\n
Place of Origin:Wemzhou, China<\/dt>\n<\/dl>\n
\n
ANMASPC<\/dt>\n<\/dl>\n
\n
Utiliser : FTTH<\/dt>\n<\/dl>\n
\n
Dur\u00e9e de garantie : 12 mois<\/dt>\n<\/dl>\n
\n
R\u00e9seau : Aucun<\/dt>\n<\/dl>\n
\n
Diam\u00e8tre int\u00e9rieur du sous-conduit : 10 mm<\/dt>\n<\/dl>\n
\n
Sub duct outer diameter:14mm<\/dt>\n<\/dl>\n
\n
Thickness:1.2mm<\/dt>\n<\/dl>\n
\n
Outer Diameter::30.4mm * 16.4mm (\u00b10.5mm)<\/dt>\n<\/dl>\n
\n
Indice de fluidit\u00e9 \u00e0 chaud : 0,1 ~ 0,4 g\/10 minutes<\/dt>\n<\/dl>\n
\n
Densit\u00e9 : min. 0,940 g\/cm3<\/dt>\n<\/dl>\n
\n
R\u00e9sistance \u00e0 la traction au seuil d'\u00e9coulement : Min. 20 MPa<\/dt>\n<\/dl>\n
\n
Allongement \u00e0 la rupture : Min 350%<\/dt>\n<\/dl>\n
\n
Environmental stress crack resist (F50):Min<\/dt>\n<\/dl>\n<\/div>\n

<\/span><\/p>\n<\/div>\n

<\/p>\n

  • \nPrix FAB <\/em> US $0.5 – 9,999 \/ Piece <\/li>\n
  • \nQuantit\u00e9 min. de commande : <\/em> 100 Pi\u00e8ces<\/li>\n
  • \nCapacit\u00e9 d'approvisionnement : <\/em> 10000 Pi\u00e8ce\/Pi\u00e8ces par mois<\/li>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n<\/div><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n\t\t\t\t\"HDPE\n<\/div>\n<\/p><\/div>\n<\/div>\n

    2 ways<\/span><\/h3>\n
    \n
    \n
    \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    \n
    Physical and Mechanical Properties \u2013 Inner Micro duct 14\/10mm<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    Apparence visuelle<\/span><\/div>\n<\/td>\n
    		\n
    Inspection visuelle<\/span><\/div>\n<\/td>\n
    		\n
    Surface int\u00e9rieure nervur\u00e9e et ext\u00e9rieure lisse, exempte de cloques, de retassures, de d\u00e9laminage, de rayures et de rugosit\u00e9.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    Diam\u00e8tre ext\u00e9rieur<\/span><\/div>\n<\/td>\n
    		ANMASPC<\/span><\/td>\n\n
    14.0mm \u00b1 0.1mm<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    \u00c9paisseur de paroi<\/span><\/div>\n<\/td>\n
    		ANMASPC<\/span><\/td>\n\n
    2.00mm \u00b1 0.10mm<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    4<\/span><\/div>\n<\/td>\n
    		\n
    Jeu du diam\u00e8tre int\u00e9rieur<\/span><\/div>\n<\/td>\n
    		\n
    Bille d'acier souffl\u00e9e<\/span><\/div>\n<\/td>\n
    		\n
    A 8.5mm steel ball can be blown freely through the duct.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    5<\/span><\/div>\n<\/td>\n
    		\n
    Ovalisation<\/span><\/div>\n<\/td>\n
    		ANMASPC<\/span><\/td>\n\n
    \u2264 5%<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    6<\/span><\/div>\n<\/td>\n
    		\n
    Pressurisation<\/span><\/div>\n<\/td>\n
    		\n
    5 minutes \u00e0 25 bars par conduit<\/span><\/div>\n<\/td>\n
    		\n
    Aucun dommage et aucune fuite<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    7<\/span><\/div>\n<\/td>\n
    		\n
    Paraphilie<\/span><\/div>\n<\/td>\n
    		\n
    CEI 60794-1-2 M\u00e9thode E10<\/span><\/div>\n<\/td>\n
    		\n
    \u2264 140mm<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    8<\/span><\/div>\n<\/td>\n
    		\n
    R\u00e9sistance \u00e0 la traction<\/span><\/div>\n<\/td>\n
    		\n
    Taux d'extension :
    \n100 mm\/min<\/span><\/div>\n<\/td>\n
    		\n
    \u2265 1350N<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    9<\/span><\/div>\n<\/td>\n
    		\n
    Broyer<\/span><\/div>\n<\/td>\n
    		\n
    Longueur de l'\u00e9chantillon : 250 mm
    \nLoad: 1400N
    \nDur\u00e9e de la charge max. : 1 min
    \nTemps de r\u00e9cup\u00e9ration : 1 heure<\/span><\/div>\n<\/td>\n
    		\n
    Aucune d\u00e9formation r\u00e9siduelle sup\u00e9rieure \u00e0 15% du diam\u00e8tre int\u00e9rieur et ext\u00e9rieur ; doit r\u00e9ussir l'essai de jeu au niveau du diam\u00e8tre int\u00e9rieur.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    10<\/span><\/div>\n<\/td>\n
    		\n
    Impact<\/span><\/div>\n<\/td>\n
    		\n
    CEI 60794-1-2 M\u00e9thode E4
    \n1.5J Impact, recovery time 1 hour<\/span><\/div>\n<\/td>\n
    		\n
    Aucune d\u00e9formation r\u00e9siduelle sup\u00e9rieure \u00e0 15% du diam\u00e8tre int\u00e9rieur et ext\u00e9rieur ; doit r\u00e9ussir l'essai de jeu au niveau du diam\u00e8tre int\u00e9rieur.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    11<\/span><\/div>\n<\/td>\n
    		\n
    Retour thermique<\/span><\/div>\n<\/td>\n
    		\n
    110\u2103 \uff5e 23\u2103, 1 hour<\/span><\/div>\n<\/td>\n
    		\n
    \u2264 3%<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    12<\/span><\/div>\n<\/td>\n
    		\n
    Rayon de courbure min.<\/span><\/div>\n<\/td>\n
    		\n
    168mm<\/span><\/div>\n<\/td>\n
    		\n
    Aucune d\u00e9formation r\u00e9siduelle sup\u00e9rieure \u00e0 15% du diam\u00e8tre int\u00e9rieur et ext\u00e9rieur ; doit r\u00e9ussir l'essai de jeu au niveau du diam\u00e8tre int\u00e9rieur.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    13<\/span><\/div>\n<\/td>\n
    		\n
    Coefficient de frottement<\/span><\/div>\n<\/td>\n
    		\n
    750mm Diameter, 450\u00b0loop, 5kg mass<\/span><\/div>\n<\/td>\n
    		\n
    \u2264 0.1<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    14<\/span><\/div>\n<\/td>\n
    		\n
    Couleur et impression<\/span><\/div>\n<\/td>\n
    		\n
    Inspection visuelle<\/span><\/div>\n<\/td>\n
    		\n
    Selon les sp\u00e9cifications du client<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
    \n
    \n\n\n\n\n\n\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    Inner micro duct:<\/span><\/div>\n<\/td>\n
    		\n
    14\/10mm<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    Outer Diameter:<\/span><\/div>\n<\/td>\n
    		\n
    30.4mm * 16.4mm (\u00b10.5mm)<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    Thickness of sheathing:<\/span><\/div>\n<\/td>\n
    		\n
    1.2mm<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    Remarks: Ripcord are optional.<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
    \n
    \n
    \n

    Raw materials:<\/span><\/h3>\n
    \n
    \n
    \n
    \u00a0<\/span><\/div>\n

    HDPE of a high-molecular type with the following parameters is used for production of the Tube Bundle: – Melt flow index: 0.1 \uff5e 0.4 g\/10 minutes EN ISO 1133 (190 \u00b0C, 2.16 KG) – Density: Min. 0.940 g\/cm3 ISO 1183 – Tensile strength at yield: Min. 20MPa ISO 527 – Elongation at the break: Min 350% ISO 527 – Environmental stress crack resist (F50) Min. 96 hours ISO 4599<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

    \n
    \n
    \n

    Construction<\/span><\/h3>\n
    \n
    \n
    – PE sheath: The outer sheath is manufactured from colored HDPE, halogen free. Normal outer sheath color is orange. Other color is possible upon customer request. – Micro duct: The micro duct is manufactured from HDPE, extruded from 100% virgin material. The color shall be red, green or other customized. <\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
    \n
    \n\n\n\n\n\n\n\n\n\n
    \n
    Pos.<\/span><\/div>\n<\/td>\n
    		\n
    Performance m\u00e9canique<\/span><\/div>\n<\/td>\n
    		\n
    Conditions d'essai<\/span><\/div>\n<\/td>\n
    		\n
    Performance<\/span><\/div>\n<\/td>\n
    		\n
    Standard<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    R\u00e9sistance \u00e0 la traction
    \n\u00e0 l'intersection<\/span><\/div>\n<\/td>\n
    		\n
    Taux d'extension :
    \n100 mm\/min<\/span><\/div>\n<\/td>\n
    		\n
    \u22651400N<\/span><\/div>\n<\/td>\n
    		\n
    CEI 60794-1-2
    \nM\u00e9thode E1<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    Broyer<\/span><\/div>\n<\/td>\n
    		\n
    Longueur de l'\u00e9chantillon : 250 mm
    \nLoad: 1400N
    \nDur\u00e9e de la charge max. : 1 minute
    \nTemps de r\u00e9cup\u00e9ration : 1 heure<\/span><\/div>\n<\/td>\n
    		\n
    Les diam\u00e8tres ext\u00e9rieur et int\u00e9rieur doivent, lors d'un examen visuel, ne pr\u00e9senter aucun dommage ni aucune r\u00e9duction de diam\u00e8tre sup\u00e9rieure \u00e0 15%.<\/span><\/div>\n<\/td>\n
    		\n
    CEI 60794-1-2
    \nM\u00e9thode E3<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    Paraphilie<\/span><\/div>\n<\/td>\n
    		\n
    \u2264140mm<\/span><\/div>\n<\/td>\n
    		\n
    –<\/span><\/div>\n<\/td>\n
    		\n
    CEI 60794-1-2
    \nM\u00e9thode E10<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    4<\/span><\/div>\n<\/td>\n
    		\n
    Impact<\/span><\/div>\n<\/td>\n
    		\n
    Rayon de la surface de frappe : 10 mm
    \n\u00c9nergie d'impact : 1J
    \nNombre d'impacts : 3 fois
    \nTemps de r\u00e9cup\u00e9ration : 1 heure<\/span><\/div>\n<\/td>\n
    		\n
    Apr\u00e8s examen visuel, il ne doit y avoir aucun dommage sur le micro-conduit.<\/span><\/div>\n<\/td>\n
    		\n
    CEI 60794-1-2
    \nM\u00e9thode E4<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    5<\/span><\/div>\n<\/td>\n
    		\n
    Rayon de courbure<\/span><\/div>\n<\/td>\n
    		\n
    Nombre de tours : 5
    \nMandrel diameter: 168mm
    \nNombre de cycles : 3<\/span><\/div>\n<\/td>\n
    		\n
    Les diam\u00e8tres ext\u00e9rieur et int\u00e9rieur doivent, lors d'un examen visuel, ne pr\u00e9senter aucun dommage ni aucune r\u00e9duction de diam\u00e8tre sup\u00e9rieure \u00e0 15%.<\/span><\/div>\n<\/td>\n
    		\n
    CEI 60794-1-2
    \nM\u00e9thode E11<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    6<\/span><\/div>\n<\/td>\n
    		\n
    Friction<\/span><\/div>\n<\/td>\n
    		\n
    \/<\/span><\/div>\n<\/td>\n
    		\n
    \u22640.1<\/span><\/div>\n<\/td>\n
    		\n
    FCST<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
    \n
    \n\n\n\n\n\n\n\n\n
    \n
    Pos.<\/span><\/div>\n<\/td>\n
    		\n
    Article<\/span><\/div>\n<\/td>\n
    		\n
    Sp\u00e9cification<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    Apparence<\/span><\/div>\n<\/td>\n
    		\n
    Smooth outer wall (UV-stabilized) without visible impurities; well-proportioned color, no bubbles or cracks; with defined markings
    \non outer wall.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    R\u00e9sistance \u00e0 la traction<\/span><\/div>\n<\/td>\n
    		\n
    Use Pull socks to tension a sample in accordance with table below:
    \nSample length: 1m
    \nTensile speed: 20mm\/min
    \nLoad: 2200N
    \nDuration of the tension: 5 min.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    Crush Resistance<\/span><\/div>\n<\/td>\n
    		\n
    A 250mm sample after 1 minute load time and 1 hour recovery time. Load (plate) shall be 2000N. The imprint of the plate on the
    \nsheath is not considered as mechanical damage.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    4<\/span><\/div>\n<\/td>\n
    		\n
    Impact<\/span><\/div>\n<\/td>\n
    		\n
    Striking surface radius shall be 10mm and impact energy 3J. Recovery time shall be one out. The imprint of the striking surface on
    \nthe microduct is not considered as mechanical damage.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    5<\/span><\/div>\n<\/td>\n
    		\n
    Bend<\/span><\/div>\n<\/td>\n
    		\n
    Diameter of mandrel shall be 40X OD of sample, 4 turns, 3 cycles.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    Completed packages of the HDPE Tube Bundle on drums can be stored outdoor max. 6 months upon the date of production. Storage temperature: -40\u00b0C \uff5e +70\u00b0C Installation temperature: -30\u00b0C \uff5e +50\u00b0C Operating temperature: -40\u00b0C \uff5e +70\u00b0C<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n

    Design<\/span><\/h3>\n
    \n
    \n
    – A bundle of micro- or mini-tubes (strengthened wall size) is surrounded by single thin HDPE sheath. The design makes the duct assemblies suitable for installation in other existing ducts or underground direct bury. The micro ducts are optimized for best cable blowing performance. – The inner micro duct has suitable low friction characteristics on the inside surface. The micro duct has colors according to figures 1.<\/span><\/div>\n<\/div>\n<\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n<\/div>\n

    \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>","protected":false},"excerpt":{"rendered":"

    Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number:2ways 14\/10mm DB Tube Bundle Type:Micro Duct & Tube Bundle Place of Origin:Wemzhou, China Brand Name:ANMASPC Use:FTTH Warranty Time:12months Network:None Sub duct Inner diameter:10mm Sub duct outer diameter:14mm Thickness:1.2mm Outer Diameter::30.4mm * 16.4mm (\u00b10.5mm) Melt flow index:0.1 ~ 0.4 g\/10 minutes Density:Min. 0.940 g\/cm3 Tensile strength at yield:Min. 20MPa Elongation at the break:Min 350% Environmental stress crack resist (F50):Min FOB Price: US $0.5 – 9,999 \/ Piece Min.Order Quantity: 100 Piece\/Pieces Supply Ability: 10000 Piece\/Pieces per Month<\/p>","protected":false},"featured_media":1281,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-1280","product","type-product","status-publish","has-post-thumbnail","product_cat-hdpe-microducts","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/product\/1280","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/comments?post=1280"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/media\/1281"}],"wp:attachment":[{"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/media?parent=1280"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/product_brand?post=1280"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/product_cat?post=1280"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/microductconnector.com\/fr\/wp-json\/wp\/v2\/product_tag?post=1280"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}