{"id":302,"date":"2026-08-24T11:30:52","date_gmt":"2026-08-24T03:30:52","guid":{"rendered":"https:\/\/microductconnector.com\/product\/7-ways-1210-mm-with-pe-sheath-3-4mm-direct-buried-db-hdpe-micro-duct-tube-bundle-for-air-blowing-cable-installation-project-product\/"},"modified":"2026-09-03T09:33:38","modified_gmt":"2026-09-03T09:33:38","slug":"7-ways-1210-mm-with-pe-sheath-3-4mm-direct-buried-db-hdpe-micro-duct-tube-bundle-for-air-blowing-cable-installation-project-product","status":"publish","type":"product","link":"https:\/\/microductconnector.com\/es\/product\/7-ways-1210-mm-with-pe-sheath-3-4mm-direct-buried-db-hdpe-micro-duct-tube-bundle-for-air-blowing-cable-installation-project-product\/","title":{"rendered":"7 formas de tubo de HDPE BD de 12\/10 mm"},"content":{"rendered":"

Detalles del producto<\/h2>\n

\tZhejiang Oulu Automatic Equipment Co., Ltd.<\/span><\/p>\n

Breve descripci\u00f3n:<\/h3>\n
\n
Detalles esenciales<\/div>\n
\n
\n
Model Number:7 Ways 12\/10mm DB Tube Bundle<\/dt>\n<\/dl>\n
\n
Type:Tube bundle<\/dt>\n<\/dl>\n
\n
Place of Origin:Shanghai, China<\/dt>\n<\/dl>\n
\n
ANMASPC<\/dt>\n<\/dl>\n
\n
Uso: FTTH<\/dt>\n<\/dl>\n
\n
Tiempo de garant\u00eda: 12 meses<\/dt>\n<\/dl>\n
\n
Red: Ninguna<\/dt>\n<\/dl>\n
\n
Di\u00e1metro interior del subconducto: 10 mm<\/dt>\n<\/dl>\n
\n
Sub duct outer diameter:12mm<\/dt>\n<\/dl>\n
\n
PE Sheath:3.4mm<\/dt>\n<\/dl>\n
\n
Outer Diameter::42.8mm (\u00b11.1mm)<\/dt>\n<\/dl>\n
\n
\u00cdndice de fluidez: 0,1 ~ 0,4 g\/10 minutos<\/dt>\n<\/dl>\n
\n
Densidad: M\u00edn. 0,940 g\/cm3<\/dt>\n<\/dl>\n
\n
Resistencia a la tracci\u00f3n en el punto de fluencia: M\u00edn. 20 MPa<\/dt>\n<\/dl>\n
\n
Alargamiento a la rotura: m\u00edn. 350%<\/dt>\n<\/dl>\n
\n
Environmental stress crack resist (F50):Min. 96 hours<\/dt>\n<\/dl>\n
\n
Storage temperature:-40\u00b0C ~ +70\u00b0C<\/dt>\n<\/dl>\n<\/div>\n
\n
Supply Ability\uff1a1000000 Piece\/Pieces per Day<\/div>\n<\/div>\n

\u00a0<\/p>\n

\u00a0<\/p>\n

\u00a0<\/p>\n<\/p>\n<\/div>\n

<\/p>\n

  • \nPrecio FOB: <\/em> US $0.5 – 9,999 \/ Piece <\/li>\n
  • \nCantidad M\u00ednima de Pedido: <\/em> 100 Pieza\/Piezas<\/li>\n
  • \nCapacidad de suministro: <\/em> 10000 Pieza\/Piezas al mes<\/li>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n<\/div><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n\t\t\t\t\"7\n<\/div>\n<\/p><\/div>\n<\/div>\n

    7 WAYS<\/span><\/h3>\n
    \n
    \n
    \n
    \n
    \n
    \n
    A bundle of micro- or mini-tubes (regular wall size) is surrounded by dual HDPE sheath. The design makes the duct assemblies suitable for outdoor direct bury application. The inner micro ducts are optimized for best cable blowing performance.<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
    \n
    \n
    \n

    Materias primas<\/span><\/h3>\n
    \n
    \n
    HDPE of a high-molecular type with the following parameters is used for production of the Tube Bundle: – Melt flow index: 0.1 \uff5e 0.4 g\/10 minutes EN ISO 1133 – Density: Min. 0.940 g\/cm3 ISO 1183 – Tensile strength at yield: Min. 20MPa ISO 527 – Elongation at the break: Min 350% ISO 527 – Environmental stress crack resist (F50) Min. 96 hours ISO 4599<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
    \n
    \n\n\n\n\n\n\n\n\n
    \n
    Pos.<\/span><\/div>\n<\/td>\n
    		\n
    Rendimiento mec\u00e1nico<\/span><\/div>\n<\/td>\n
    		\n
    Condiciones de prueba<\/span><\/div>\n<\/td>\n
    		\n
    Rendimiento<\/span><\/div>\n<\/td>\n
    		\n
    Est\u00e1ndar<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    Resistencia a la tracci\u00f3n
    \nen el rendimiento<\/span><\/div>\n<\/td>\n
    		\n
    Velocidad de extensi\u00f3n:
    \n100 mm\/min<\/span><\/div>\n<\/td>\n
    		\n
    \u2265620N<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nM\u00e9todo E1<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    Crush<\/span><\/div>\n<\/td>\n
    		\n
    Longitud de la muestra: 250 mm
    \nLoad: 380N
    \nDuraci\u00f3n de la carga m\u00e1x.: 1 minuto
    \nTiempo de recuperaci\u00f3n: 1 hora<\/span><\/div>\n<\/td>\n
    		\n
    El di\u00e1metro exterior y el di\u00e1metro interior deber\u00e1n presentarse, tras un examen visual, sin da\u00f1os y sin una reducci\u00f3n del di\u00e1metro superior a 15%.<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nM\u00e9todo E3<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    Parafilias<\/span><\/div>\n<\/td>\n
    		\n
    \u2264120mm<\/span><\/div>\n<\/td>\n
    		\n
    –<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nM\u00e9todo E10<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    4<\/span><\/div>\n<\/td>\n
    		\n
    Impacto<\/span><\/div>\n<\/td>\n
    		\n
    Radio de la superficie de impacto: 10 mm
    \nEnerg\u00eda de impacto: 1J
    \nN\u00famero de impactos: 3 veces
    \nTiempo de recuperaci\u00f3n: 1 hora<\/span><\/div>\n<\/td>\n
    		\n
    Tras el examen visual, no deber\u00e1 haber da\u00f1os en el microducto.<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nM\u00e9todo E4<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    5<\/span><\/div>\n<\/td>\n
    		\n
    Radio de curvatura<\/span><\/div>\n<\/td>\n
    		\n
    N\u00famero de giros: 5
    \nMandrel diameter:144mm.
    \nN\u00famero de ciclos: 3<\/span><\/div>\n<\/td>\n
    		\n
    El di\u00e1metro exterior y el di\u00e1metro interior deber\u00e1n presentarse, tras un examen visual, sin da\u00f1os y sin una reducci\u00f3n del di\u00e1metro superior a 15%.<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nM\u00e9todo E11<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
    \n
    \n\n\n\n\n\n\n\n\n
    \n
    Pos.<\/span><\/div>\n<\/td>\n
    		\n
    Art\u00edculo<\/span><\/div>\n<\/td>\n
    		\n
    Especificaci\u00f3n<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    Aspecto<\/span><\/div>\n<\/td>\n
    		\n
    Pared exterior lisa (estabilizada contra los rayos UV) sin impurezas visibles; color bien proporcionado, sin burbujas ni grietas; con marcas definidas
    \nen la pared exterior.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    Resistencia a la tracci\u00f3n<\/span><\/div>\n<\/td>\n
    		\n
    Utilice calcetines de tracci\u00f3n para tensar una muestra de acuerdo con la siguiente tabla:
    \nLongitud de la muestra: 1m
    \nVelocidad de tracci\u00f3n: 20 mm\/min
    \nLoad: 6800N
    \nDuraci\u00f3n de la tensi\u00f3n: 5 min.<\/span><\/div>\n<\/td>\n
    		\n
    No debe haber da\u00f1os visibles ni deformaciones residuales superiores a 15% del di\u00e1metro exterior del conjunto de conductos.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    Resistencia al aplastamiento<\/span><\/div>\n<\/td>\n
    		\n
    Una muestra de 250 mm despu\u00e9s de 1 minuto de tiempo de carga y 1 hora de tiempo de recuperaci\u00f3n. La carga (placa) ser\u00e1 de 2000 N. La huella de la placa en el
    \nla funda no se considera da\u00f1o mec\u00e1nico.<\/span><\/div>\n<\/td>\n
    		\n
    No debe haber da\u00f1os visibles ni deformaciones residuales superiores a 15% del di\u00e1metro exterior del conjunto de conductos.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    4<\/span><\/div>\n<\/td>\n
    		\n
    Impacto<\/span><\/div>\n<\/td>\n
    		\n
    Striking surface radius shall be 10mm and impact energy 10J. Recovery time shall be one out. The imprint of the striking surface
    \non the microduct is not considered as mechanical damage.<\/span><\/div>\n<\/td>\n
    		\n
    No debe haber da\u00f1os visibles ni deformaciones residuales superiores a 15% del di\u00e1metro exterior del conjunto de conductos.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    5<\/span><\/div>\n<\/td>\n
    		\n
    Doblar<\/span><\/div>\n<\/td>\n
    		\n
    El di\u00e1metro del mandril debe ser 40 veces el di\u00e1metro exterior (OD) de la muestra, 4 vueltas, 3 ciclos.<\/span><\/div>\n<\/td>\n
    		\n
    No debe haber da\u00f1os visibles ni deformaciones residuales superiores a 15% del di\u00e1metro exterior del conjunto de conductos.<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    Completed packages of the HDPE Tube Bundle on drums can be stored outdoor max. 6 months upon the date of production. Storage temperature: -40\u00b0C \uff5e +70\u00b0C Installation temperature: -30\u00b0C \uff5e +50\u00b0C Operating temperature: -40\u00b0C \uff5e +70\u00b0C<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    Detalles esenciales<\/div>\n
    \n
    \n
    Model Number:7 Ways 12\/10mm DB Tube Bundle<\/dt>\n<\/dl>\n
    \n
    Type:Tube bundle<\/dt>\n<\/dl>\n
    \n
    Place of Origin:Shanghai, China<\/dt>\n<\/dl>\n
    \n
    ANMASPC<\/dt>\n<\/dl>\n
    \n
    Uso: FTTH<\/dt>\n<\/dl>\n
    \n
    Tiempo de garant\u00eda: 12 meses<\/dt>\n<\/dl>\n
    \n
    Red: Ninguna<\/dt>\n<\/dl>\n
    \n
    Di\u00e1metro interior del subconducto: 10 mm<\/dt>\n<\/dl>\n
    \n
    Sub duct outer diameter:12mm<\/dt>\n<\/dl>\n
    \n
    PE Sheath:3.4mm<\/dt>\n<\/dl>\n
    \n
    Outer Diameter::42.8mm (\u00b11.1mm)<\/dt>\n<\/dl>\n
    \n
    \u00cdndice de fluidez: 0,1 ~ 0,4 g\/10 minutos<\/dt>\n<\/dl>\n
    \n
    Densidad: M\u00edn. 0,940 g\/cm3<\/dt>\n<\/dl>\n
    \n
    Resistencia a la tracci\u00f3n en el punto de fluencia: M\u00edn. 20 MPa<\/dt>\n<\/dl>\n
    \n
    Alargamiento a la rotura: m\u00edn. 350%<\/dt>\n<\/dl>\n
    \n
    Environmental stress crack resist (F50):Min. 96 hours<\/dt>\n<\/dl>\n
    \n
    Storage temperature:-40\u00b0C ~ +70\u00b0C<\/dt>\n<\/dl>\n<\/div>\n
    Supply Ability\uff1a1000000 Piece\/Pieces per Day<\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

    Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number:7 Ways 12\/10mm DB Tube Bundle Type:Tube bundle Place of Origin:Shanghai, China Brand Name:ANMASPC Use:FTTH Warranty Time:12months Network:None Sub duct Inner diameter:10mm Sub duct outer diameter:12mm PE Sheath:3.4mm Outer Diameter::42.8mm (\u00b11.1mm) Melt flow index:0.1 ~ 0.4 g\/10 minutes Density:Min. 0.940 g\/cm3 Tensile strength at yield:Min. 20MPa Elongation at the break:Min 350% Environmental stress crack resist (F50):Min. 96 hours Storage temperature:-40\u00b0C ~ +70\u00b0C Supply Ability\uff1a1000000 Piece\/Pieces per Day \u00a0 \u00a0 \u00a0 FOB Price: US $0.5 – 9,999 \/ Piece Min.Order Quantity: 100 Piece\/Pieces Supply Ability: 10000 Piece\/Pieces per Month<\/p>","protected":false},"featured_media":303,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-302","product","type-product","status-publish","has-post-thumbnail","product_cat-hdpe-microducts","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/product\/302","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/comments?post=302"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/media\/303"}],"wp:attachment":[{"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/media?parent=302"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/product_brand?post=302"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/product_cat?post=302"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/product_tag?post=302"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}