{"id":156,"date":"2026-08-24T11:29:21","date_gmt":"2026-08-24T03:29:21","guid":{"rendered":"https:\/\/microductconnector.com\/product\/19-ways-73-5mm-with-pe1-2mm-telecom-hdpe-pipe-micro-duct-air-blowing-project-product\/"},"modified":"2026-09-03T09:33:58","modified_gmt":"2026-09-03T09:33:58","slug":"19-ways-73-5mm-with-pe1-2mm-telecom-hdpe-pipe-micro-duct-air-blowing-project-product","status":"publish","type":"product","link":"https:\/\/microductconnector.com\/es\/product\/19-ways-73-5mm-with-pe1-2mm-telecom-hdpe-pipe-micro-duct-air-blowing-project-product\/","title":{"rendered":"HDPE Pipe 19ways 7\/3.5mm PE1.2mm"},"content":{"rendered":"

Detalles del producto<\/h2>\n

\tZhejiang Oulu Automatic Equipment Co., Ltd.<\/span><\/p>\n

Breve descripci\u00f3n:<\/h3>\n
\n
Detalles esenciales<\/div>\n
\n
\n
Model Number:19ways 7\/3.5mm DB Tube Bundle<\/dt>\n<\/dl>\n
\n
Tipo: Microducto y haz de tubos<\/dt>\n<\/dl>\n
\n
Lugar de origen: Wenzhou, China<\/dt>\n<\/dl>\n
\n
ANMASPC<\/dt>\n<\/dl>\n
\n
Uso: FTTH<\/dt>\n<\/dl>\n
\n
Tiempo de garant\u00eda: 12 meses<\/dt>\n<\/dl>\n
\n
Red: Ninguna<\/dt>\n<\/dl>\n
\n
Sub duct Inner diameter:3.5mm<\/dt>\n<\/dl>\n
\n
Sub duct outer diameter:7mm<\/dt>\n<\/dl>\n
\n
PE Sheath:1.2mm<\/dt>\n<\/dl>\n
\n
Outer Diameter::44.4mm (\u00b11.2mm)<\/dt>\n<\/dl>\n
\n
\u00cdndice de fluidez: 0,1 ~ 0,4 g\/10 minutos<\/dt>\n<\/dl>\n
\n
Densidad: M\u00edn. 0,940 g\/cm3<\/dt>\n<\/dl>\n
\n
Resistencia a la tracci\u00f3n en el punto de fluencia: M\u00edn. 20 MPa<\/dt>\n<\/dl>\n
\n
Alargamiento a la rotura: m\u00edn. 350%<\/dt>\n<\/dl>\n
\n
Environmental stress crack resist (F50):Min. 96 hours<\/dt>\n<\/dl>\n
\n
Kink:\u2264140mm<\/dt>\n<\/dl>\n<\/div>\n
\n
Supply Ability\uff1a1000000 Meter\/Meters per Week<\/div>\n<\/div>\n

<\/span><\/p>\n<\/div>\n

<\/p>\n

  • \nPrecio FOB: <\/em> US $0.5 – 9,999 \/ Piece <\/li>\n
  • \nCantidad M\u00ednima de Pedido: <\/em> 100 Pieza\/Piezas<\/li>\n
  • \nCapacidad de suministro: <\/em> 10000 Pieza\/Piezas al mes<\/li>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n<\/div><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n\t\t\t\t\"HDPE\n<\/div>\n<\/p><\/div>\n<\/div>\n

    19 WAYS<\/span><\/h3>\n
    \n
    \n
    \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    \n
    Physical and Mechanical Properties \u2013 Inner Micro duct 7\/3.5mm<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    Apariencia visual<\/span><\/div>\n<\/td>\n
    		\n
    Inspecci\u00f3n visual<\/span><\/div>\n<\/td>\n
    		\n
    Superficie interior acanalada y exterior lisa, libre de ampollas, sopladuras, descamaci\u00f3n, ara\u00f1azos y rugosidad.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    Di\u00e1metro exterior<\/span><\/div>\n<\/td>\n
    		ANMASPC<\/span><\/td>\n\n
    7.0mm \u00b1 0.1mm<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    Espesor de pared<\/span><\/div>\n<\/td>\n
    		ANMASPC<\/span><\/td>\n\n
    1.50mm \u00b1 0.10mm<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    4<\/span><\/div>\n<\/td>\n
    		\n
    Holgura del di\u00e1metro interior<\/span><\/div>\n<\/td>\n
    		\n
    Bola de acero soplando<\/span><\/div>\n<\/td>\n
    		\n
    Una bola de acero de 3,0 mm se puede soplar libremente a trav\u00e9s del conducto.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    5<\/span><\/div>\n<\/td>\n
    		\n
    Ovalidad<\/span><\/div>\n<\/td>\n
    		ANMASPC<\/span><\/td>\n\n
    \u2264 5%<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    6<\/span><\/div>\n<\/td>\n
    		\n
    Presurizaci\u00f3n<\/span><\/div>\n<\/td>\n
    		\n
    5 minutos a 16 bares cada conducto<\/span><\/div>\n<\/td>\n
    		\n
    Sin da\u00f1os ni fugas<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    7<\/span><\/div>\n<\/td>\n
    		\n
    Parafilias<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2 M\u00e9todo E10<\/span><\/div>\n<\/td>\n
    		\n
    \u2264 70mm<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    8<\/span><\/div>\n<\/td>\n
    		\n
    Resistencia a la tracci\u00f3n<\/span><\/div>\n<\/td>\n
    		\n
    Velocidad de extensi\u00f3n:
    \n100 mm\/min<\/span><\/div>\n<\/td>\n
    		\n
    \u2265 470N<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    9<\/span><\/div>\n<\/td>\n
    		\n
    Crush<\/span><\/div>\n<\/td>\n
    		\n
    Longitud de la muestra: 250 mm
    \nCarga: 1650N
    \nDuraci\u00f3n de la carga m\u00e1x.: 1 min
    \nTiempo de recuperaci\u00f3n: 1 hora<\/span><\/div>\n<\/td>\n
    		\n
    No debe haber deformaci\u00f3n residual > 15% en el di\u00e1metro interior ni en el exterior; debe superar la prueba de holgura del di\u00e1metro interior.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    10<\/span><\/div>\n<\/td>\n
    		\n
    Impacto<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2 M\u00e9todo E4
    \nImpacto de 1.0 J, tiempo de recuperaci\u00f3n de 1 hora<\/span><\/div>\n<\/td>\n
    		\n
    No debe haber deformaci\u00f3n residual > 15% en el di\u00e1metro interior ni en el exterior; debe superar la prueba de holgura del di\u00e1metro interior.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    11<\/span><\/div>\n<\/td>\n
    		\n
    Reversi\u00f3n t\u00e9rmica<\/span><\/div>\n<\/td>\n
    		\n
    110\u2103 \uff5e 23\u2103, 1 hour<\/span><\/div>\n<\/td>\n
    		\n
    \u2264 3%<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    12<\/span><\/div>\n<\/td>\n
    		\n
    Radio de curvatura m\u00edn.<\/span><\/div>\n<\/td>\n
    		\n
    84mm<\/span><\/div>\n<\/td>\n
    		\n
    No debe haber deformaci\u00f3n residual > 15% en el di\u00e1metro interior ni en el exterior; debe superar la prueba de holgura del di\u00e1metro interior.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    13<\/span><\/div>\n<\/td>\n
    		\n
    Coeficiente de fricci\u00f3n<\/span><\/div>\n<\/td>\n
    		\n
    750mm Diameter, 450\u00b0loop, 5kg mass<\/span><\/div>\n<\/td>\n
    		\n
    \u2264 0.1<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    14<\/span><\/div>\n<\/td>\n
    		\n
    Color e impresi\u00f3n<\/span><\/div>\n<\/td>\n
    		\n
    Inspecci\u00f3n visual<\/span><\/div>\n<\/td>\n
    		\n
    Seg\u00fan la especificaci\u00f3n del cliente<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
    \n
    \n\n\n\n\n\n\n\n\n
    \n
    Pos.<\/span><\/div>\n<\/td>\n
    		\n
    Item<\/span><\/div>\n<\/td>\n
    		\n
    Specification<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    Appearance<\/span><\/div>\n<\/td>\n
    		\n
    Smooth outer wall (UV-stabilized) without visible impurities; well-proportioned color, no bubbles or cracks; with defined markings
    \non outer wall.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    Resistencia a la tracci\u00f3n<\/span><\/div>\n<\/td>\n
    		\n
    Use Pull socks to tension a sample in accordance with table below:
    \nSample length: 1m
    \nTensile speed: 20mm\/min
    \nLoad: 9000N
    \nDuration of the tension: 5 min.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    Crush Resistance<\/span><\/div>\n<\/td>\n
    		\n
    A 250mm sample after 1 minute load time and 1 hour recovery time. Load (plate) shall be 2500N. The imprint of the plate on the
    \nsheath is not considered as mechanical damage.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    4<\/span><\/div>\n<\/td>\n
    		\n
    Impacto<\/span><\/div>\n<\/td>\n
    		\n
    Striking surface radius shall be 10mm and impact energy 10J. Recovery time shall be one out. The imprint of the striking surface
    \non the microduct is not considered as mechanical damage.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    5<\/span><\/div>\n<\/td>\n
    		\n
    Bend<\/span><\/div>\n<\/td>\n
    		\n
    Diameter of mandrel shall be 40X OD of sample, 4 turns, 3 cycles.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    Completed packages of the HDPE Tube Bundle on drums can be stored outdoor max. 6 months upon the date of production. Storage temperature: -40\u00b0C \uff5e +70\u00b0C Installation temperature: -30\u00b0C \uff5e +50\u00b0C Operating temperature: -40\u00b0C \uff5e +70\u00b0C<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    Detalles esenciales<\/div>\n
    \n
    \n
    Model Number:19ways 7\/3.5mm DB Tube Bundle<\/dt>\n<\/dl>\n
    \n
    Tipo: Microducto y haz de tubos<\/dt>\n<\/dl>\n
    \n
    Lugar de origen: Wenzhou, China<\/dt>\n<\/dl>\n
    \n
    ANMASPC<\/dt>\n<\/dl>\n
    \n
    Uso: FTTH<\/dt>\n<\/dl>\n
    \n
    Tiempo de garant\u00eda: 12 meses<\/dt>\n<\/dl>\n
    \n
    Red: Ninguna<\/dt>\n<\/dl>\n
    \n
    Sub duct Inner diameter:3.5mm<\/dt>\n<\/dl>\n
    \n
    Sub duct outer diameter:7mm<\/dt>\n<\/dl>\n
    \n
    PE Sheath:1.2mm<\/dt>\n<\/dl>\n
    \n
    Outer Diameter::44.4mm (\u00b11.2mm)<\/dt>\n<\/dl>\n
    \n
    \u00cdndice de fluidez: 0,1 ~ 0,4 g\/10 minutos<\/dt>\n<\/dl>\n
    \n
    Densidad: M\u00edn. 0,940 g\/cm3<\/dt>\n<\/dl>\n
    \n
    Resistencia a la tracci\u00f3n en el punto de fluencia: M\u00edn. 20 MPa<\/dt>\n<\/dl>\n
    \n
    Alargamiento a la rotura: m\u00edn. 350%<\/dt>\n<\/dl>\n
    \n
    Environmental stress crack resist (F50):Min. 96 hours<\/dt>\n<\/dl>\n
    \n
    Kink:\u2264140mm<\/dt>\n<\/dl>\n<\/div>\n
    Supply Ability\uff1a1000000 Meter\/Meters per Week<\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n<\/div>\n

    \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>","protected":false},"excerpt":{"rendered":"

    Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number:19ways 7\/3.5mm DB Tube Bundle Type:Micro Duct & Tube Bundle Place of Origin:Wenzhou, China Brand Name:ANMASPC Use:FTTH Warranty Time:12months Network:None Sub duct Inner diameter:3.5mm Sub duct outer diameter:7mm PE Sheath:1.2mm Outer Diameter::44.4mm (\u00b11.2mm) Melt flow index:0.1 ~ 0.4 g\/10 minutes Density:Min. 0.940 g\/cm3 Tensile strength at yield:Min. 20MPa Elongation at the break:Min 350% Environmental stress crack resist (F50):Min. 96 hours Kink:\u2264140mm Supply Ability\uff1a1000000 Meter\/Meters per Week FOB Price: US $0.5 – 9,999 \/ Piece Min.Order Quantity: 100 Piece\/Pieces Supply Ability: 10000 Piece\/Pieces per Month<\/p>","protected":false},"featured_media":157,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-156","product","type-product","status-publish","has-post-thumbnail","product_cat-hdpe-microducts","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/product\/156","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/comments?post=156"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/media\/157"}],"wp:attachment":[{"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/media?parent=156"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/product_brand?post=156"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/product_cat?post=156"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/product_tag?post=156"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}