{"id":1280,"date":"2026-08-24T11:42:49","date_gmt":"2026-08-24T03:42:49","guid":{"rendered":"https:\/\/microductconnector.com\/product\/hdpe-pipe-tube-bundle-db-series-2ways-1410mm-with-pe-sheath-1-2mm-for-fiber-optic-air-blowing-cable-install-underground-product\/"},"modified":"2026-09-03T09:31:11","modified_gmt":"2026-09-03T09:31:11","slug":"hdpe-pipe-tube-bundle-db-series-2ways-1410mm-with-pe-sheath-1-2mm-for-fiber-optic-air-blowing-cable-install-underground-product","status":"publish","type":"product","link":"https:\/\/microductconnector.com\/es\/product\/hdpe-pipe-tube-bundle-db-series-2ways-1410mm-with-pe-sheath-1-2mm-for-fiber-optic-air-blowing-cable-install-underground-product\/","title":{"rendered":"Tubo de tuber\u00eda de HDPE de 2 v\u00edas 14\/10mm"},"content":{"rendered":"

Detalles del producto<\/h2>\n

\tZhejiang Oulu Automatic Equipment Co., Ltd.<\/span><\/p>\n

Breve descripci\u00f3n:<\/h3>\n
\n

Detalles esenciales<\/p>\n

\n
\n
N\u00famero de modelo: Haz de tubos DB de 2 v\u00edas 14\/10 mm<\/dt>\n<\/dl>\n
\n
Tipo: Microducto y haz de tubos<\/dt>\n<\/dl>\n
\n
Lugar de origen: Wenzhou, China<\/dt>\n<\/dl>\n
\n
ANMASPC<\/dt>\n<\/dl>\n
\n
Uso: FTTH<\/dt>\n<\/dl>\n
\n
Tiempo de garant\u00eda: 12 meses<\/dt>\n<\/dl>\n
\n
Red: Ninguna<\/dt>\n<\/dl>\n
\n
Di\u00e1metro interior del subconducto: 10 mm<\/dt>\n<\/dl>\n
\n
Di\u00e1metro exterior del subconducto: 14 mm<\/dt>\n<\/dl>\n
\n
Espesor: 1,2 mm<\/dt>\n<\/dl>\n
\n
Outer Diameter::30.4mm * 16.4mm (\u00b10.5mm)<\/dt>\n<\/dl>\n
\n
\u00cdndice de fluidez: 0,1 ~ 0,4 g\/10 minutos<\/dt>\n<\/dl>\n
\n
Densidad: M\u00edn. 0,940 g\/cm3<\/dt>\n<\/dl>\n
\n
Resistencia a la tracci\u00f3n en el punto de fluencia: M\u00edn. 20 MPa<\/dt>\n<\/dl>\n
\n
Alargamiento a la rotura: m\u00edn. 350%<\/dt>\n<\/dl>\n
\n
Resistencia al agrietamiento por estr\u00e9s ambiental (F50): M\u00edn<\/dt>\n<\/dl>\n<\/div>\n

<\/span><\/p>\n<\/div>\n

<\/p>\n

  • \nPrecio FOB: <\/em> US $0.5 – 9,999 \/ Piece <\/li>\n
  • \nCantidad M\u00ednima de Pedido: <\/em> 100 Pieza\/Piezas<\/li>\n
  • \nCapacidad de suministro: <\/em> 10000 Pieza\/Piezas al mes<\/li>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n<\/div><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n\t\t\t\t\"HDPE\n<\/div>\n<\/p><\/div>\n<\/div>\n

    2 maneras<\/span><\/h3>\n
    \n
    \n
    \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    \n
    Physical and Mechanical Properties \u2013 Inner Micro duct 14\/10mm<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    Apariencia visual<\/span><\/div>\n<\/td>\n
    		\n
    Inspecci\u00f3n visual<\/span><\/div>\n<\/td>\n
    		\n
    Superficie interior acanalada y exterior lisa, libre de ampollas, sopladuras, descamaci\u00f3n, ara\u00f1azos y rugosidad.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    Di\u00e1metro exterior<\/span><\/div>\n<\/td>\n
    		ANMASPC<\/span><\/td>\n\n
    14.0mm \u00b1 0.1mm<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    Espesor de pared<\/span><\/div>\n<\/td>\n
    		ANMASPC<\/span><\/td>\n\n
    2.00mm \u00b1 0.10mm<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    4<\/span><\/div>\n<\/td>\n
    		\n
    Holgura del di\u00e1metro interior<\/span><\/div>\n<\/td>\n
    		\n
    Bola de acero soplando<\/span><\/div>\n<\/td>\n
    		\n
    Una bola de acero de 8,5 mm puede soplarse libremente a trav\u00e9s del conducto.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    5<\/span><\/div>\n<\/td>\n
    		\n
    Ovalidad<\/span><\/div>\n<\/td>\n
    		ANMASPC<\/span><\/td>\n\n
    \u2264 5%<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    6<\/span><\/div>\n<\/td>\n
    		\n
    Presurizaci\u00f3n<\/span><\/div>\n<\/td>\n
    		\n
    5 minutos a 25 bares cada conducto<\/span><\/div>\n<\/td>\n
    		\n
    Sin da\u00f1os ni fugas<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    7<\/span><\/div>\n<\/td>\n
    		\n
    Parafilias<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2 M\u00e9todo E10<\/span><\/div>\n<\/td>\n
    		\n
    \u2264 140mm<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    8<\/span><\/div>\n<\/td>\n
    		\n
    Resistencia a la tracci\u00f3n<\/span><\/div>\n<\/td>\n
    		\n
    Velocidad de extensi\u00f3n:
    \n100 mm\/min<\/span><\/div>\n<\/td>\n
    		\n
    \u2265 1350N<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    9<\/span><\/div>\n<\/td>\n
    		\n
    Crush<\/span><\/div>\n<\/td>\n
    		\n
    Longitud de la muestra: 250 mm
    \nCarga: 1400N
    \nDuraci\u00f3n de la carga m\u00e1x.: 1 min
    \nTiempo de recuperaci\u00f3n: 1 hora<\/span><\/div>\n<\/td>\n
    		\n
    No debe haber deformaci\u00f3n residual > 15% en el di\u00e1metro interior ni en el exterior; debe superar la prueba de holgura del di\u00e1metro interior.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    10<\/span><\/div>\n<\/td>\n
    		\n
    Impacto<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2 M\u00e9todo E4
    \nImpacto de 1,5 J, tiempo de recuperaci\u00f3n de 1 hora<\/span><\/div>\n<\/td>\n
    		\n
    No debe haber deformaci\u00f3n residual > 15% en el di\u00e1metro interior ni en el exterior; debe superar la prueba de holgura del di\u00e1metro interior.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    11<\/span><\/div>\n<\/td>\n
    		\n
    Reversi\u00f3n t\u00e9rmica<\/span><\/div>\n<\/td>\n
    		\n
    110\u2103 \uff5e 23\u2103, 1 hour<\/span><\/div>\n<\/td>\n
    		\n
    \u2264 3%<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    12<\/span><\/div>\n<\/td>\n
    		\n
    Radio de curvatura m\u00edn.<\/span><\/div>\n<\/td>\n
    		\n
    168 mm<\/span><\/div>\n<\/td>\n
    		\n
    No debe haber deformaci\u00f3n residual > 15% en el di\u00e1metro interior ni en el exterior; debe superar la prueba de holgura del di\u00e1metro interior.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    13<\/span><\/div>\n<\/td>\n
    		\n
    Coeficiente de fricci\u00f3n<\/span><\/div>\n<\/td>\n
    		\n
    750mm Diameter, 450\u00b0loop, 5kg mass<\/span><\/div>\n<\/td>\n
    		\n
    \u2264 0.1<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    14<\/span><\/div>\n<\/td>\n
    		\n
    Color e impresi\u00f3n<\/span><\/div>\n<\/td>\n
    		\n
    Inspecci\u00f3n visual<\/span><\/div>\n<\/td>\n
    		\n
    Seg\u00fan la especificaci\u00f3n del cliente<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
    \n
    \n\n\n\n\n\n\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    Microducto interior:<\/span><\/div>\n<\/td>\n
    		\n
    14\/10mm<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    Di\u00e1metro exterior:<\/span><\/div>\n<\/td>\n
    		\n
    30.4mm * 16.4mm (\u00b10.5mm)<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    Grosor del entablado:<\/span><\/div>\n<\/td>\n
    		\n
    1,2 mm<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    Observaciones: Los cables de liberaci\u00f3n son opcionales.<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
    \n
    \n
    \n

    Materias primas:<\/span><\/h3>\n
    \n
    \n
    \n
    \u00a0<\/span><\/div>\n

    HDPE of a high-molecular type with the following parameters is used for production of the Tube Bundle: – Melt flow index: 0.1 \uff5e 0.4 g\/10 minutes EN ISO 1133 (190 \u00b0C, 2.16 KG) – Density: Min. 0.940 g\/cm3 ISO 1183 – Tensile strength at yield: Min. 20MPa ISO 527 – Elongation at the break: Min 350% ISO 527 – Environmental stress crack resist (F50) Min. 96 hours ISO 4599<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

    \n
    \n
    \n

    Construcci\u00f3n<\/span><\/h3>\n
    \n
    \n
    – PE sheath: The outer sheath is manufactured from colored HDPE, halogen free. Normal outer sheath color is orange. Other color is possible upon customer request. – Micro duct: The micro duct is manufactured from HDPE, extruded from 100% virgin material. The color shall be red, green or other customized. <\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
    \n
    \n\n\n\n\n\n\n\n\n\n
    \n
    Pos.<\/span><\/div>\n<\/td>\n
    		\n
    Rendimiento mec\u00e1nico<\/span><\/div>\n<\/td>\n
    		\n
    Condiciones de prueba<\/span><\/div>\n<\/td>\n
    		\n
    Rendimiento<\/span><\/div>\n<\/td>\n
    		\n
    Est\u00e1ndar<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    Resistencia a la tracci\u00f3n
    \nen el rendimiento<\/span><\/div>\n<\/td>\n
    		\n
    Velocidad de extensi\u00f3n:
    \n100 mm\/min<\/span><\/div>\n<\/td>\n
    		\n
    \u22651400N<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nMethod E1<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    Crush<\/span><\/div>\n<\/td>\n
    		\n
    Longitud de la muestra: 250 mm
    \nCarga: 1400N
    \nDuration of Max. load: 1 minutes
    \nTiempo de recuperaci\u00f3n: 1 hora<\/span><\/div>\n<\/td>\n
    		\n
    The outer and inner diameter shall show, under visual examination without damage and no reduction of diameter greater than 15%.<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nMethod E3<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    Parafilias<\/span><\/div>\n<\/td>\n
    		\n
    \u2264140mm<\/span><\/div>\n<\/td>\n
    		\n
    –<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nMethod E10<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    4<\/span><\/div>\n<\/td>\n
    		\n
    Impacto<\/span><\/div>\n<\/td>\n
    		\n
    Striking surface radius: 10mm
    \nImpact Energy: 1J
    \nNumber of impact: 3 times
    \nTiempo de recuperaci\u00f3n: 1 hora<\/span><\/div>\n<\/td>\n
    		\n
    Under visual examination, there shall be no damage to the micro duct.<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nMethod E4<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    5<\/span><\/div>\n<\/td>\n
    		\n
    Bend radius<\/span><\/div>\n<\/td>\n
    		\n
    Number of turns: 5
    \nMandrel diameter: 168mm
    \nMumber of cycles: 3<\/span><\/div>\n<\/td>\n
    		\n
    The outer and inner diameter shall show, under visual examination without damage and no reduction of diameter greater than 15%.<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nMethod E11<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    6<\/span><\/div>\n<\/td>\n
    		\n
    Friction<\/span><\/div>\n<\/td>\n
    		\n
    \/<\/span><\/div>\n<\/td>\n
    		\n
    \u22640.1<\/span><\/div>\n<\/td>\n
    		\n
    FCST<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
    \n
    \n\n\n\n\n\n\n\n\n
    \n
    Pos.<\/span><\/div>\n<\/td>\n
    		\n
    Item<\/span><\/div>\n<\/td>\n
    		\n
    Specification<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    Appearance<\/span><\/div>\n<\/td>\n
    		\n
    Smooth outer wall (UV-stabilized) without visible impurities; well-proportioned color, no bubbles or cracks; with defined markings
    \non outer wall.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    Resistencia a la tracci\u00f3n<\/span><\/div>\n<\/td>\n
    		\n
    Use Pull socks to tension a sample in accordance with table below:
    \nSample length: 1m
    \nTensile speed: 20mm\/min
    \nLoad: 2200N
    \nDuration of the tension: 5 min.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    Crush Resistance<\/span><\/div>\n<\/td>\n
    		\n
    A 250mm sample after 1 minute load time and 1 hour recovery time. Load (plate) shall be 2000N. The imprint of the plate on the
    \nsheath is not considered as mechanical damage.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    4<\/span><\/div>\n<\/td>\n
    		\n
    Impacto<\/span><\/div>\n<\/td>\n
    		\n
    Striking surface radius shall be 10mm and impact energy 3J. Recovery time shall be one out. The imprint of the striking surface on
    \nthe microduct is not considered as mechanical damage.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    5<\/span><\/div>\n<\/td>\n
    		\n
    Bend<\/span><\/div>\n<\/td>\n
    		\n
    Diameter of mandrel shall be 40X OD of sample, 4 turns, 3 cycles.<\/span><\/div>\n<\/td>\n
    		\n
    No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    Completed packages of the HDPE Tube Bundle on drums can be stored outdoor max. 6 months upon the date of production. Storage temperature: -40\u00b0C \uff5e +70\u00b0C Installation temperature: -30\u00b0C \uff5e +50\u00b0C Operating temperature: -40\u00b0C \uff5e +70\u00b0C<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n

    Design<\/span><\/h3>\n
    \n
    \n
    – A bundle of micro- or mini-tubes (strengthened wall size) is surrounded by single thin HDPE sheath. The design makes the duct assemblies suitable for installation in other existing ducts or underground direct bury. The micro ducts are optimized for best cable blowing performance. – The inner micro duct has suitable low friction characteristics on the inside surface. The micro duct has colors according to figures 1.<\/span><\/div>\n<\/div>\n<\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n<\/div>\n

    \"Tubo<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>\n

    \n \"HDPE<\/p>","protected":false},"excerpt":{"rendered":"

    Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number:2ways 14\/10mm DB Tube Bundle Type:Micro Duct & Tube Bundle Place of Origin:Wemzhou, China Brand Name:ANMASPC Use:FTTH Warranty Time:12months Network:None Sub duct Inner diameter:10mm Sub duct outer diameter:14mm Thickness:1.2mm Outer Diameter::30.4mm * 16.4mm (\u00b10.5mm) Melt flow index:0.1 ~ 0.4 g\/10 minutes Density:Min. 0.940 g\/cm3 Tensile strength at yield:Min. 20MPa Elongation at the break:Min 350% Environmental stress crack resist (F50):Min FOB Price: US $0.5 – 9,999 \/ Piece Min.Order Quantity: 100 Piece\/Pieces Supply Ability: 10000 Piece\/Pieces per Month<\/p>","protected":false},"featured_media":1281,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-1280","product","type-product","status-publish","has-post-thumbnail","product_cat-hdpe-microducts","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/product\/1280","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/comments?post=1280"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/media\/1281"}],"wp:attachment":[{"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/media?parent=1280"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/product_brand?post=1280"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/product_cat?post=1280"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/microductconnector.com\/es\/wp-json\/wp\/v2\/product_tag?post=1280"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}