Inserto de sellado monocanal GEZA de 7-16 mm, sello hermético al aire y al agua para microductos
El inserto de sellado monocanal GEZA se adapta a diámetros exteriores de microductos de 7 mm a 16 mm. Ofrece un sellado de extremos hermético y estanco al agua fiable, funcionando tanto para conductos vacíos como para microductos con cables preinstalados. Construcción robusta para despliegues de telecomunicaciones FTTH subterráneos, ampliamente aceptada en proyectos de construcción de redes de fibra óptica en Europa.
GEZA microduct sealing insert for empty or cable-filled ducts
The GEZA microduct sealing insert is presented for microduct outside diameters from 7–16 mm and can be used with empty or cable-filled ducts.
Supplier information describes an airtight and watertight end seal for underground FTTH deployment. Confirm the exact duct and cable combination, test conditions and installation method before purchase.
Key details
Artículo
Published information
Product type
Single-channel microduct sealing insert
Published duct range
7–16 mm outside diameter
Duct condition
Empty or cable-filled microduct
Supplier-stated sealing
Airtight and watertight end sealing
Aplicación
Underground FTTH telecom deployment
Selection details for a cable-filled microduct seal
Use these checkpoints to prepare a product-specific enquiry and avoid selecting by a general trade name alone.
Measure the microduct: Provide the actual outside and inside diameter and confirm that it falls within the published 7–16 mm range.
Describe the duct condition: State whether the microduct is empty or already contains a cable, including the cable diameter when applicable.
Define the environment: Identify underground, chamber or other installation conditions and the required airtight or watertight test.
Confirm supply details: Request the matching insert, sample option, packing quantity, documentation and current lead time.
OEM & PROJECT CAPABILITY
Company capability for telecom supply
Oulu Automatic Equipment presents itself as a supplier of microduct connectors, HDPE microduct systems, cable blowing accessories and pneumatic fittings for telecom contractors, distributors and OEM partners.
The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. For a product-specific enquiry, include:
Provide the actual outside and inside diameter and confirm that it falls within the published 7–16 mm range.
Target quantity by size or model, sample needs, mixed specifications and packing preference.
Project drawings, pressure or sealing requirements, and required compliance or export documents.
Current MOQ, payment, freight, sample timing and production timing to be confirmed in the quotation.
Company-level service statements and commercial terms should be reconfirmed for the selected product and order.
Share dimensions, route conditions and quantities for a product-specific quotation. Send product requirements
PROJECT SUPPORT
Plan the microduct connection or sealing point
Review the microduct route solutions page and the supplier’s Servicio page for project-support context. Confirm the exact product fit, documents and commercial terms in the quotation.
A microduct forms a protected path for telecom or fiber cable. The GEZA insert is used at the duct end to address the opening around an empty duct or an installed cable.
What are the standard sizes of microducts?
Microducts are produced in multiple sizes. This GEZA page publishes a 7–16 mm outside-diameter range, but the exact insert must still be confirmed against the measured duct and cable.
What is a microduct cable?
It is a cable selected for installation inside a microduct pathway. For a cable-filled sealing insert, provide both the cable diameter and the microduct dimensions.
What is the difference between conduit and microducts?
A larger conduit may carry several pathways, while a microduct is a smaller tube for an individual cable route. The GEZA insert is specified against the microduct opening.
Can a microduct sealing insert be fitted after the cable is installed?
The supplier presents this GEZA insert for both empty and cable-filled microducts. Confirm the exact installation sequence and size combination before ordering.
What information is needed to quote a watertight microduct seal?
Send the duct outside and inside diameter, cable diameter if occupied, route environment, sealing test requirement, quantity and requested documents.
Zhejiang Oulu Automatic Equipment Co., Ltd. Descripción corta: Conector para microductos que proporciona una conexión con sellado estanco al gas alrededor del cable en su interior. Cuando está abierto, el cable se puede introducir mediante soplado a través de este conector y sellarse posteriormente girando el anillo. Operan de forma segura a una presión de soplado de 10 bares...
Zhejiang Oulu Automatic Equipment Co., Ltd. Descripción corta: Descripción: Conector para microductos que proporciona una conexión con sello hermético al gas alrededor del cable en su interior. Cuando se abre, el cable se puede soplar a través de este conector y sellarse posteriormente girando el anillo. Operan de manera segura al soplar...
